Re: [PATCH 06/14] media: sun4i-csi: Add support for A10 CSI1 camera sensor interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Dec 16, 2019 at 12:59:16AM +0800, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <wens@xxxxxxxx>
>
> The A10/A20 Allwinner SoCs have two camera sensor interface blocks,
> named CSI0 and CSI1. The two have the same register layouts with
> slightly different features:
>
>   - CSI0 has an image signal processor (ISP); CSI1 doesn't
>
>   - CSI0 can support up to four separate channels under CCIR656;
>     CSI1 can only support one
>
>   - CSI0 can support up to 16-bit wide bus with YUV422;
>     CSI1 can support up to 24-bit wide bus with YUV444
>
> For now the driver doesn't support wide busses, nor CCIR656. So the
> only relevant difference is whether a clock needs to be taken and
> enabled for the ISP.
>
> Add structs to record the differences, tie them to the compatible
> strings, and deal with the ISP clock. Support for the new CSI1
> hardware block is added as well.
>
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>

Acked-by: Maxime Ripard <mripard@xxxxxxxxxx>

Thanks!
Maxime

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux