Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency to 25MHz
as specified in "Common Module Clock Configurations" of the Cadence
Sierra 16FFC Multi-Protocol PHY PMA Specification. It is set to 25MHz
since the only user of Cadence Sierra SERDES, TI J721E SoC provides
input clock frequency of 100MHz. For other frequencies,
cmn_refclk_dig_div/cmn_refclk1_dig_div should be configured
based on the "Common Module Clock Configurations".
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
drivers/phy/cadence/phy-cadence-sierra.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c
index 665a6dbc7816..82466d0e9b38 100644
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -198,6 +198,8 @@ struct cdns_sierra_phy {
struct regmap_field *phy_pll_cfg_1;
struct regmap_field *pllctrl_lock[SIERRA_MAX_LANES];
struct clk *clk;
+ struct clk *cmn_refclk_dig_div;
+ struct clk *cmn_refclk1_dig_div;
int nsubnodes;
u32 num_lanes;
bool autoconf;
@@ -279,6 +281,8 @@ static int cdns_sierra_phy_init(struct phy *gphy)
if (phy->autoconf)
return 0;
+ clk_set_rate(phy->cmn_refclk_dig_div, 25000000);
+ clk_set_rate(phy->cmn_refclk1_dig_div, 25000000);
if (ins->phy_type == PHY_TYPE_PCIE) {
num_cmn_regs = phy->init_data->pcie_cmn_regs;
num_ln_regs = phy->init_data->pcie_ln_regs;
@@ -468,6 +472,7 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
struct resource *res;
int i, ret, node = 0;
void __iomem *base;
+ struct clk *clk;
struct device_node *dn = dev->of_node, *child;
if (of_get_child_count(dn) == 0)
@@ -523,6 +528,22 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev)
return PTR_ERR(sp->apb_rst);
}
+ clk = devm_clk_get_optional(dev, "cmn_refclk_dig_div");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "cmn_refclk_dig_div clock not found\n");
+ ret = PTR_ERR(clk);
+ return ret;
+ }
+ sp->cmn_refclk_dig_div = clk;
+
+ clk = devm_clk_get_optional(dev, "cmn_refclk1_dig_div");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "cmn_refclk1_dig_div clock not found\n");
+ ret = PTR_ERR(clk);
+ return ret;
+ }
+ sp->cmn_refclk1_dig_div = clk;
+
ret = clk_prepare_enable(sp->clk);
if (ret)
return ret;
--
2.17.1
