On 12/10/19 5:21 AM, Al Cooper wrote: > This patchset contains various updates to the Broadcom STB USB Driver. > The updates include: > - Add support for 7216 and 7211 Broadcom SoCs which use the new > Synopsis USB Controller. > - Add support for USB Wake > - Add various bug fixes. > > v3 - Rebase to v5.5-rc1 > > v2 - Changes based on review feedback > - Add vendor prefix to DT property "syscon-piarbctl" > - Use standard "wakeup" instead of "wake" for DT "interrupt-names" This entire series: Tested-by: Florian Fainelli <f.fainelli@xxxxxxxxx> > > Al Cooper (13): > phy: usb: EHCI DMA may lose a burst of DMA data for 7255xA0 family > phy: usb: Get all drivers that use USB clks using correct > enable/disable > phy: usb: Put USB phys into IDDQ on suspend to save power in S2 mode > phy: usb: Add "wake on" functionality > phy: usb: Restructure in preparation for adding 7216 USB support > dt-bindings: Add Broadcom STB USB PHY binding document > phy: usb: Add support for new Synopsis USB controller on the 7216 > phy: usb: Add support for new Synopsis USB controller on the 7211b0 > phy: usb: fix driver to defer on clk_get defer > phy: usb: PHY's MDIO registers not accessible without device installed > phy: usb: bdc: Fix occasional failure with BDC on 7211 > phy: usb: USB driver is crashing during S3 resume on 7216 > phy: usb: Add support for wake and USB low power mode for 7211 S2/S5 > > .../bindings/phy/brcm,brcmstb-usb-phy.txt | 69 ++- > drivers/phy/broadcom/Makefile | 2 +- > .../phy/broadcom/phy-brcm-usb-init-synopsis.c | 414 ++++++++++++++++++ > drivers/phy/broadcom/phy-brcm-usb-init.c | 226 +++++----- > drivers/phy/broadcom/phy-brcm-usb-init.h | 148 ++++++- > drivers/phy/broadcom/phy-brcm-usb.c | 269 ++++++++++-- > 6 files changed, 943 insertions(+), 185 deletions(-) > create mode 100644 drivers/phy/broadcom/phy-brcm-usb-init-synopsis.c > -- Florian
