On 12 December 2019 16:04, Marco Felsch wrote: > Add gpio device documentation to make the da9062 gpios available for > users. > > Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx> > --- > Changelog: > > v2: > - remove sub-node documentation > - squash gpio properties into mfd documentation > --- > Documentation/devicetree/bindings/mfd/da9062.txt | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt > b/Documentation/devicetree/bindings/mfd/da9062.txt > index edca653a5777..089a28bc77a4 100644 > --- a/Documentation/devicetree/bindings/mfd/da9062.txt > +++ b/Documentation/devicetree/bindings/mfd/da9062.txt > @@ -13,6 +13,7 @@ da9062-rtc : : Real-Time Clock > da9062-onkey : : On Key > da9062-watchdog : : Watchdog Timer > da9062-thermal : : Thermal > +da9062-gpio : : GPIOs > > The DA9061 PMIC consists of: > > @@ -38,6 +39,15 @@ Required properties: > See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for > further information on IRQ bindings. > > +Optional properties: > + > +- gpio-controller : Marks the device as a gpio controller. > +- #gpio-cells : Should be two. The first cell is the pin number and the > + second cell is used to specify the gpio polarity. > + > +See Documentation/devicetree/bindings/gpio/gpio.txt for further information > on > +GPIO bindings. > + > Sub-nodes: > > - regulators : This node defines the settings for the LDOs and BUCKs. > -- > 2.20.1
