On 2019-12-12 01:03, Doug Anderson wrote:
Hi,
On Thu, Nov 28, 2019 at 1:55 AM Rajeshwari <rkambl@xxxxxxxxxxxxxx>
wrote:
Add TSENS node and user thermal zone for TSENS sensors in SC7180.
Signed-off-by: Rajeshwari <rkambl@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 527
+++++++++++++++++++++++++++++++++++
1 file changed, 527 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 666e9b9..6656ffc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -911,6 +911,26 @@
status = "disabled";
};
+ tsens0: thermal-sensor@c263000 {
+ compatible =
"qcom,sc7180-tsens","qcom,tsens-v2";
+ reg = <0 0x0c263000 0 0x1ff>, /* TM */
+ <0 0x0c222000 0 0x1ff>; /* SROT */
+ #qcom,sensors = <15>;
+ interrupts = <GIC_SPI 506
IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
Can you also send a patch to match Amit's ("arm64: dts: sdm845:
thermal: Add critical interrupt support") [1]. If I'm reading things
correctly it should be 508 for tsens0 and 509 for tsens1 just like on
sdm845.
[1]
https://lore.kernel.org/r/c536e9cdb448bbad3441f6580fa57f1f921fb580.1573499020.git.amit.kucheria@xxxxxxxxxx
yes, i will send the patch for critical interrupt support.
Thanks!
-Rajeshwari
