On 2019-12-12 00:31, Doug Anderson wrote:
Hi,
On Thu, Nov 28, 2019 at 1:55 AM Rajeshwari <rkambl@xxxxxxxxxxxxxx>
wrote:
Add TSENS node and user thermal zone for TSENS sensors in SC7180.
Signed-off-by: Rajeshwari <rkambl@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 527
+++++++++++++++++++++++++++++++++++
1 file changed, 527 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 666e9b9..6656ffc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -911,6 +911,26 @@
status = "disabled";
};
+ tsens0: thermal-sensor@c263000 {
+ compatible =
"qcom,sc7180-tsens","qcom,tsens-v2";
Can you please send a patch listing this configuration in
"Documentation/devicetree/bindings/thermal/qcom-tsens.yaml"? You
shouldn't need to re-send the dts since it looks like it's already
landed, but it's good to get the bindings happy.
Sure, i will send the patch, adding this configuration in
qcom-tsens.yaml.
Thanks!
-Rajeshwari
