[PATCH 4/4] iio: accel: bma180: BMA254 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This adds support for the BMA254 variant of this
accelerometer. The only difference for the simple IIO
driver is that values are 12 bit and the temperature
offset differs by 1 degree.

Cc: Peter Meerwald <pmeerw@xxxxxxxxxx>
Cc: Oleksandr Kravchenko <o.v.kravchenko@xxxxxxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
 .../devicetree/bindings/iio/accel/bma180.txt  |   7 +-
 drivers/iio/accel/Kconfig                     |   4 +-
 drivers/iio/accel/bma180.c                    | 108 +++++++++++++++---
 3 files changed, 100 insertions(+), 19 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
index 3b25b4c4d446..f53237270b32 100644
--- a/Documentation/devicetree/bindings/iio/accel/bma180.txt
+++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt
@@ -1,11 +1,14 @@
-* Bosch BMA180 / BMA250 triaxial acceleration sensor
+* Bosch BMA180 / BMA25x triaxial acceleration sensor
 
 http://omapworld.com/BMA180_111_1002839.pdf
 http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
 
 Required properties:
 
-  - compatible : should be "bosch,bma180" or "bosch,bma250"
+  - compatible : should be one of:
+    "bosch,bma180"
+    "bosch,bma250"
+    "bosch,bma254"
   - reg : the I2C address of the sensor
 
 Optional properties:
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index d4ef35aeb579..2f10fd7954fc 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -89,13 +89,13 @@ config ADXL372_I2C
 	  module will be called adxl372_i2c.
 
 config BMA180
-	tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
+	tristate "Bosch BMA180/BMA25x 3-Axis Accelerometer Driver"
 	depends on I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here if you want to build a driver for the Bosch BMA180 or
-	  BMA250 triaxial acceleration sensor.
+	  BMA25x triaxial acceleration sensor.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called bma180.
diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index f583f10ccbb9..952b2918525b 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -9,6 +9,7 @@
  * SPI is not supported by driver
  * BMA180: 7-bit I2C slave address 0x40 or 0x41
  * BMA250: 7-bit I2C slave address 0x18 or 0x19
+ * BMA254: 7-bit I2C slave address 0x18 or 0x19
  */
 
 #include <linux/module.h>
@@ -34,17 +35,20 @@
 enum chip_ids {
 	BMA180,
 	BMA250,
+	BMA254,
 };
 
 struct bma180_data;
 
 struct bma180_part_info {
+	u8 chip_id;
 	const struct iio_chan_spec *channels;
 	unsigned int num_channels;
 	const int *scale_table;
 	unsigned int num_scales;
 	const int *bw_table;
 	unsigned int num_bw;
+	int center_temp;
 
 	u8 int_reset_reg, int_reset_mask;
 	u8 sleep_reg, sleep_mask;
@@ -52,6 +56,7 @@ struct bma180_part_info {
 	u8 scale_reg, scale_mask;
 	u8 power_reg, power_mask, lowpower_val;
 	u8 int_enable_reg, int_enable_mask;
+	u8 int_map_reg, int_enable_dataready_int1_mask;
 	u8 softreset_reg;
 
 	int (*chip_config)(struct bma180_data *data);
@@ -90,6 +95,8 @@ struct bma180_part_info {
 #define BMA180_RESET_VAL	0xb6
 
 #define BMA180_ID_REG_VAL	0x03
+#define BMA250_ID_REG_VAL	0x03
+#define BMA254_ID_REG_VAL	0xfa /* 250 decimal */
 
 /* Chip power modes */
 #define BMA180_LOW_POWER	0x03
@@ -110,6 +117,23 @@ struct bma180_part_info {
 #define BMA250_INT1_DATA_MASK	BIT(0)
 #define BMA250_INT_RESET_MASK	BIT(7) /* Reset pending interrupts */
 
+#define BMA254_RANGE_REG	0x0f
+#define BMA254_BW_REG		0x10
+#define BMA254_POWER_REG	0x11
+#define BMA254_RESET_REG	0x14
+#define BMA254_INT_ENABLE_REG	0x17
+#define BMA254_INT_MAP_REG	0x1a
+#define BMA254_INT_RESET_REG	0x21
+
+#define BMA254_RANGE_MASK	GENMASK(3, 0) /* Range of accel values */
+#define BMA254_BW_MASK		GENMASK(4, 0) /* Accel bandwidth */
+#define BMA254_SUSPEND_MASK	BIT(7) /* chip will sleep */
+#define BMA254_LOWPOWER_MASK	BIT(6)
+#define BMA254_DATA_INTEN_MASK	BIT(4)
+#define BMA254_INT2_DATA_MASK	BIT(7)
+#define BMA254_INT1_DATA_MASK	BIT(0)
+#define BMA254_INT_RESET_MASK	BIT(7) /* Reset pending interrupts */
+
 struct bma180_data {
 	struct regulator *vdd_supply;
 	struct regulator *vddio_supply;
@@ -135,8 +159,8 @@ enum bma180_chan {
 static int bma180_bw_table[] = { 10, 20, 40, 75, 150, 300 }; /* Hz */
 static int bma180_scale_table[] = { 1275, 1863, 2452, 3727, 4903, 9709, 19417 };
 
-static int bma250_bw_table[] = { 8, 16, 31, 63, 125, 250 }; /* Hz */
-static int bma250_scale_table[] = { 0, 0, 0, 38344, 0, 76590, 0, 0, 153180, 0,
+static int bma25x_bw_table[] = { 8, 16, 31, 63, 125, 250 }; /* Hz */
+static int bma25x_scale_table[] = { 0, 0, 0, 38344, 0, 76590, 0, 0, 153180, 0,
 	0, 0, 306458 };
 
 static int bma180_get_data_reg(struct bma180_data *data, enum bma180_chan chan)
@@ -310,8 +334,11 @@ static int bma180_chip_init(struct bma180_data *data)
 
 	if (ret < 0)
 		return ret;
-	if (ret != BMA180_ID_REG_VAL)
+	if (ret != data->part_info->chip_id) {
+		dev_err(&data->client->dev, "wrong chip ID %d expected %d\n",
+			ret, data->part_info->chip_id);
 		return -ENODEV;
+	}
 
 	ret = bma180_soft_reset(data);
 	if (ret)
@@ -358,7 +385,7 @@ static int bma180_chip_config(struct bma180_data *data)
 	return ret;
 }
 
-static int bma250_chip_config(struct bma180_data *data)
+static int bma25x_chip_config(struct bma180_data *data)
 {
 	int ret = bma180_chip_init(data);
 
@@ -370,8 +397,12 @@ static int bma250_chip_config(struct bma180_data *data)
 	ret = bma180_set_scale(data, 38344); /* 2 G */
 	if (ret)
 		goto err;
-	ret = bma180_set_bits(data, BMA250_INT_MAP_REG,
-		BMA250_INT1_DATA_MASK, 1);
+	/*
+	 * This enables dataready interrupt on the INT1 pin
+	 * FIXME: support using the INT2 pin
+	 */
+	ret = bma180_set_bits(data, data->part_info->int_map_reg,
+		data->part_info->int_enable_dataready_int1_mask, 1);
 	if (ret)
 		goto err;
 
@@ -397,7 +428,7 @@ static void bma180_chip_disable(struct bma180_data *data)
 	dev_err(&data->client->dev, "failed to disable the chip\n");
 }
 
-static void bma250_chip_disable(struct bma180_data *data)
+static void bma25x_chip_disable(struct bma180_data *data)
 {
 	if (bma180_set_new_data_intr_state(data, false))
 		goto err;
@@ -500,7 +531,7 @@ static int bma180_read_raw(struct iio_dev *indio_dev,
 			return -EINVAL;
 		}
 	case IIO_CHAN_INFO_OFFSET:
-		*val = 48; /* 0 LSB @ 24 degree C */
+		*val = data->part_info->center_temp;
 		return IIO_VAL_INT;
 	default:
 		return -EINVAL;
@@ -630,14 +661,24 @@ static const struct iio_chan_spec bma250_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(4),
 };
 
+static const struct iio_chan_spec bma254_channels[] = {
+	BMA180_ACC_CHANNEL(X, 12),
+	BMA180_ACC_CHANNEL(Y, 12),
+	BMA180_ACC_CHANNEL(Z, 12),
+	BMA180_TEMP_CHANNEL,
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
 static const struct bma180_part_info bma180_part_info[] = {
 	[BMA180] = {
+		.chip_id = BMA180_ID_REG_VAL,
 		.channels = bma180_channels,
 		.num_channels = ARRAY_SIZE(bma180_channels),
 		.scale_table = bma180_scale_table,
 		.num_scales = ARRAY_SIZE(bma180_scale_table),
 		.bw_table = bma180_bw_table,
 		.num_bw = ARRAY_SIZE(bma180_bw_table),
+		.center_temp = 48, /* 0 LSB @ 24 degree C */
 		.int_reset_reg = BMA180_CTRL_REG0,
 		.int_reset_mask = BMA180_RESET_INT,
 		.sleep_reg = BMA180_CTRL_REG0,
@@ -656,12 +697,14 @@ static const struct bma180_part_info bma180_part_info[] = {
 		.chip_disable = bma180_chip_disable,
 	},
 	[BMA250] = {
+		.chip_id = BMA250_ID_REG_VAL,
 		.channels = bma250_channels,
 		.num_channels = ARRAY_SIZE(bma250_channels),
-		.scale_table = bma250_scale_table,
-		.num_scales = ARRAY_SIZE(bma250_scale_table),
-		.bw_table = bma250_bw_table,
-		.num_bw = ARRAY_SIZE(bma250_bw_table),
+		.scale_table = bma25x_scale_table,
+		.num_scales = ARRAY_SIZE(bma25x_scale_table),
+		.bw_table = bma25x_bw_table,
+		.num_bw = ARRAY_SIZE(bma25x_bw_table),
+		.center_temp = 48, /* 0 LSB @ 24 degree C */
 		.int_reset_reg = BMA250_INT_RESET_REG,
 		.int_reset_mask = BMA250_INT_RESET_MASK,
 		.sleep_reg = BMA250_POWER_REG,
@@ -675,9 +718,39 @@ static const struct bma180_part_info bma180_part_info[] = {
 		.lowpower_val = 1,
 		.int_enable_reg = BMA250_INT_ENABLE_REG,
 		.int_enable_mask = BMA250_DATA_INTEN_MASK,
+		.int_map_reg = BMA250_INT_MAP_REG,
+		.int_enable_dataready_int1_mask = BMA250_INT1_DATA_MASK,
 		.softreset_reg = BMA250_RESET_REG,
-		.chip_config = bma250_chip_config,
-		.chip_disable = bma250_chip_disable,
+		.chip_config = bma25x_chip_config,
+		.chip_disable = bma25x_chip_disable,
+	},
+	[BMA254] = {
+		.chip_id = BMA254_ID_REG_VAL,
+		.channels = bma254_channels,
+		.num_channels = ARRAY_SIZE(bma254_channels),
+		.scale_table = bma25x_scale_table,
+		.num_scales = ARRAY_SIZE(bma25x_scale_table),
+		.bw_table = bma25x_bw_table,
+		.num_bw = ARRAY_SIZE(bma25x_bw_table),
+		.center_temp = 46, /* 0 LSB @ 23 degree C */
+		.int_reset_reg = BMA254_INT_RESET_REG,
+		.int_reset_mask = BMA254_INT_RESET_MASK,
+		.sleep_reg = BMA254_POWER_REG,
+		.sleep_mask = BMA254_SUSPEND_MASK,
+		.bw_reg = BMA254_BW_REG,
+		.bw_mask = BMA254_BW_MASK,
+		.scale_reg = BMA254_RANGE_REG,
+		.scale_mask = BMA254_RANGE_MASK,
+		.power_reg = BMA254_POWER_REG,
+		.power_mask = BMA254_LOWPOWER_MASK,
+		.lowpower_val = 1,
+		.int_enable_reg = BMA254_INT_ENABLE_REG,
+		.int_enable_mask = BMA254_DATA_INTEN_MASK,
+		.int_map_reg = BMA254_INT_MAP_REG,
+		.int_enable_dataready_int1_mask = BMA254_INT1_DATA_MASK,
+		.softreset_reg = BMA254_RESET_REG,
+		.chip_config = bma25x_chip_config,
+		.chip_disable = bma25x_chip_disable,
 	},
 };
 
@@ -918,6 +991,7 @@ static SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume);
 static const struct i2c_device_id bma180_ids[] = {
 	{ "bma180", BMA180 },
 	{ "bma250", BMA250 },
+	{ "bma254", BMA254 },
 	{ }
 };
 
@@ -932,6 +1006,10 @@ static const struct of_device_id bma180_of_match[] = {
 		.compatible = "bosch,bma250",
 		.data = (void *)BMA250
 	},
+	{
+		.compatible = "bosch,bma254",
+		.data = (void *)BMA254
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, bma180_of_match);
@@ -951,5 +1029,5 @@ module_i2c_driver(bma180_driver);
 
 MODULE_AUTHOR("Kravchenko Oleksandr <x0199363@xxxxxx>");
 MODULE_AUTHOR("Texas Instruments, Inc.");
-MODULE_DESCRIPTION("Bosch BMA180/BMA250 triaxial acceleration sensor");
+MODULE_DESCRIPTION("Bosch BMA180/BMA25x triaxial acceleration sensor");
 MODULE_LICENSE("GPL");
-- 
2.21.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux