[PATCH v2 6/6] thermal: brcmstb_thermal: Register different ops per process

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since we do not have interrupts on BCM7216, we cannot have trip point
crossing, the thermal subsystem expects us to provide a NULL set_trips
operation in that case, so make it possible to provide per-process
thermal_zone_of_device_ops

Reviewed-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
 drivers/thermal/broadcom/brcmstb_thermal.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
index 47b622f33900..8170ea1b8227 100644
--- a/drivers/thermal/broadcom/brcmstb_thermal.c
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -105,6 +105,7 @@ static struct avs_tmon_trip avs_tmon_trips[] = {
 struct brcmstb_thermal_params {
 	unsigned int offset;
 	unsigned int mult;
+	const struct thermal_zone_of_device_ops *of_ops;
 };
 
 struct brcmstb_thermal_priv {
@@ -287,19 +288,25 @@ static int brcmstb_set_trips(void *data, int low, int high)
 	return 0;
 }
 
-static const struct thermal_zone_of_device_ops of_ops = {
+static const struct thermal_zone_of_device_ops brcmstb_16nm_of_ops = {
 	.get_temp	= brcmstb_get_temp,
-	.set_trips	= brcmstb_set_trips,
 };
 
 static const struct brcmstb_thermal_params brcmstb_16nm_params = {
 	.offset	= 457829,
 	.mult	= 557,
+	.of_ops	= &brcmstb_16nm_of_ops,
+};
+
+static const struct thermal_zone_of_device_ops brcmstb_28nm_of_ops = {
+	.get_temp	= brcmstb_get_temp,
+	.set_trips	= brcmstb_set_trips,
 };
 
 static const struct brcmstb_thermal_params brcmstb_28nm_params = {
 	.offset	= 410040,
 	.mult	= 487,
+	.of_ops	= &brcmstb_28nm_of_ops,
 };
 
 static const struct of_device_id brcmstb_thermal_id_table[] = {
@@ -338,7 +345,7 @@ static int brcmstb_thermal_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, priv);
 
 	thermal = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv,
-						       &of_ops);
+						       priv->temp_params.of_ops);
 	if (IS_ERR(thermal)) {
 		ret = PTR_ERR(thermal);
 		dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux