On Mon, Dec 09, 2019 at 07:46:44PM +0100, Michael Walle wrote:
> The reboot register isn't located inside the DCFG controller, but in its
> own RST controller. Fix it.
>
> Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
> Signed-off-by: Michael Walle <michael@xxxxxxxx>
> ---
>
> changes since v1:
> - add fixes tag
> - remove "ls1028a-rst" compatible string, because there is no actual
> driver for it. It just use the syscon driver.
>
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 8b28fda2ca20..7825550b7cef 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -88,7 +88,7 @@
>
> reboot {
> compatible ="syscon-reboot";
> - regmap = <&dcfg>;
> + regmap = <&rst>;
> offset = <0xb0>;
> mask = <0x02>;
> };
> @@ -178,6 +178,12 @@
> little-endian;
> };
>
> + rst: syscon@1e60000 {
> + compatible = "syscon";
> + reg = <0x0 0x1e60000 0x0 0x10000>;
> + little-endian;
> + };
> +
> scfg: syscon@1fc0000 {
Hmm, what is your base? It doesn't apply to my branch.
Shawn
> compatible = "fsl,ls1028a-scfg", "syscon";
> reg = <0x0 0x1fc0000 0x0 0x10000>;
> --
> 2.20.1
>
