Re: [PATCH 1/2] arm64: dts: sc7180: Fix indentation/ordering of qspi nodes in sc7180-idp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 10 Dec 16:35 PST 2019, Douglas Anderson wrote:

> The qspi pinctrl nodes had the wrong intentation and sort ordering and
> the main qspi node was placed down in the pinctrl section.  Fix.
> 
> Fixes: ba3fc6496366 ("arm64: dts: sc7180: Add qupv3_0 and qupv3_1")
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>

Both patches merged, with improved spelling and r-b from Rajendra.

Thanks,
Bjorn

> ---
> 
>  arch/arm64/boot/dts/qcom/sc7180-idp.dts | 73 +++++++++++++------------
>  1 file changed, 37 insertions(+), 36 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 189254f5ae95..5eab3a282eba 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -232,6 +232,20 @@ vreg_bob: bob {
>  	};
>  };
>  
> +&qspi {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>;
> +
> +	flash@0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0>;
> +		spi-max-frequency = <25000000>;
> +		spi-tx-bus-width = <2>;
> +		spi-rx-bus-width = <2>;
> +	};
> +};
> +
>  &qupv3_id_0 {
>  	status = "okay";
>  };
> @@ -250,6 +264,29 @@ &uart8 {
>  
>  /* PINCTRL - additions to nodes defined in sc7180.dtsi */
>  
> +&qspi_clk {
> +	pinconf {
> +		pins = "gpio63";
> +		bias-disable;
> +	};
> +};
> +
> +&qspi_cs0 {
> +	pinconf {
> +		pins = "gpio68";
> +		bias-disable;
> +	};
> +};
> +
> +&qspi_data01 {
> +	pinconf {
> +		pins = "gpio64", "gpio65";
> +
> +		/* High-Z when no transfers; nice to park the lines */
> +		bias-pull-up;
> +	};
> +};
> +
>  &qup_i2c2_default {
>  	pinconf {
>  		pins = "gpio15", "gpio16";
> @@ -364,39 +401,3 @@ pinconf {
>  	};
>  };
>  
> -&qspi {
> -	status = "okay";
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>;
> -
> -	flash@0 {
> -		compatible = "jedec,spi-nor";
> -		reg = <0>;
> -		spi-max-frequency = <25000000>;
> -		spi-tx-bus-width = <2>;
> -		spi-rx-bus-width = <2>;
> -	};
> -};
> -
> -&qspi_cs0 {
> -		pinconf {
> -			pins = "gpio68";
> -			bias-disable;
> -		};
> -};
> -
> -&qspi_clk {
> -		pinconf {
> -			pins = "gpio63";
> -			bias-disable;
> -		};
> -};
> -
> -&qspi_data01 {
> -		pinconf {
> -			pins = "gpio64", "gpio65";
> -
> -			/* High-Z when no transfers; nice to park the lines */
> -			bias-pull-up;
> -		};
> -};
> -- 
> 2.24.0.525.g8f36a354ae-goog
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux