On Fri, 6 Dec 2019, at 03:45, Eddie James wrote:
> Add a node for the interrupt controller provided by the SCU.
>
> Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/aspeed-g5.dtsi | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
> index a259c63..df44022 100644
> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
> @@ -216,8 +216,9 @@
> syscon: syscon@1e6e2000 {
> compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
> reg = <0x1e6e2000 0x1a8>;
> + ranges = <0 0x1e6e2000 0x1a8>;
> #address-cells = <1>;
> - #size-cells = <0>;
> + #size-cells = <1>;
You're no-longer adding a reg property to the interrupt controller node below so the
hunk above is unnecessary.
Andrew
> #clock-cells = <1>;
> #reset-cells = <1>;
>
> @@ -231,6 +232,13 @@
> compatible = "aspeed,ast2500-p2a-ctrl";
> status = "disabled";
> };
> +
> + scu_ic: interrupt-controller@18 {
> + #interrupt-cells = <1>;
> + compatible = "aspeed,ast2500-scu-ic";
> + interrupts = <21>;
> + interrupt-controller;
> + };
> };
>
> rng: hwrng@1e6e2078 {
> --
> 1.8.3.1
>
>
