7216 is a 16nm process chip with a slightly different version of the PHY
SerdDeS/AFE that requires a specific tuning sequence. Key on the
compatible string to perform that initialization.
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
drivers/phy/broadcom/phy-brcm-sata.c | 120 +++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
index 50ac75bbb0c9..4710cfcc3037 100644
--- a/drivers/phy/broadcom/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -33,6 +33,7 @@
#define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE 0x8
enum brcm_sata_phy_version {
+ BRCM_SATA_PHY_STB_16NM,
BRCM_SATA_PHY_STB_28NM,
BRCM_SATA_PHY_STB_40NM,
BRCM_SATA_PHY_IPROC_NS2,
@@ -104,10 +105,13 @@ enum sata_phy_regs {
PLL1_ACTRL5 = 0x85,
PLL1_ACTRL6 = 0x86,
PLL1_ACTRL7 = 0x87,
+ PLL1_ACTRL8 = 0x88,
TX_REG_BANK = 0x070,
TX_ACTRL0 = 0x80,
TX_ACTRL0_TXPOL_FLIP = BIT(6),
+ TX_ACTRL5 = 0x85,
+ TX_ACTRL5_SSC_EN = BIT(11),
AEQRX_REG_BANK_0 = 0xd0,
AEQ_CONTROL1 = 0x81,
@@ -116,6 +120,7 @@ enum sata_phy_regs {
AEQ_FRC_EQ = 0x83,
AEQ_FRC_EQ_FORCE = BIT(0),
AEQ_FRC_EQ_FORCE_VAL = BIT(1),
+ AEQ_RFZ_FRC_VAL = BIT(8),
AEQRX_REG_BANK_1 = 0xe0,
AEQRX_SLCAL0_CTRL0 = 0x82,
AEQRX_SLCAL1_CTRL0 = 0x86,
@@ -152,7 +157,28 @@ enum sata_phy_regs {
TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff,
RXPMD_REG_BANK = 0x1c0,
+ RXPMD_RX_CDR_CONTROL1 = 0x81,
+ RXPMD_RX_PPM_VAL_MASK = 0x1ff,
+ RXPMD_RXPMD_EN_FRC = BIT(12),
+ RXPMD_RXPMD_EN_FRC_VAL = BIT(13),
+ RXPMD_RX_CDR_CDR_PROP_BW = 0x82,
+ RXPMD_G_CDR_PROP_BW_MASK = 0x7,
+ RXPMD_G1_CDR_PROP_BW_SHIFT = 0,
+ RXPMD_G2_CDR_PROP_BW_SHIFT = 3,
+ RXPMD_G3_CDR_PROB_BW_SHIFT = 6,
+ RXPMD_RX_CDR_CDR_ACQ_INTEG_BW = 0x83,
+ RXPMD_G_CDR_ACQ_INT_BW_MASK = 0x7,
+ RXPMD_G1_CDR_ACQ_INT_BW_SHIFT = 0,
+ RXPMD_G2_CDR_ACQ_INT_BW_SHIFT = 3,
+ RXPMD_G3_CDR_ACQ_INT_BW_SHIFT = 6,
+ RXPMD_RX_CDR_CDR_LOCK_INTEG_BW = 0x84,
+ RXPMD_G_CDR_LOCK_INT_BW_MASK = 0x7,
+ RXPMD_G1_CDR_LOCK_INT_BW_SHIFT = 0,
+ RXPMD_G2_CDR_LOCK_INT_BW_SHIFT = 3,
+ RXPMD_G3_CDR_LOCK_INT_BW_SHIFT = 6,
RXPMD_RX_FREQ_MON_CONTROL1 = 0x87,
+ RXPMD_MON_CORRECT_EN = BIT(8),
+ RXPMD_MON_MARGIN_VAL_MASK = 0xff,
};
enum sata_phy_ctrl_regs {
@@ -166,6 +192,7 @@ static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port)
u32 size = 0;
switch (priv->version) {
+ case BRCM_SATA_PHY_STB_16NM:
case BRCM_SATA_PHY_STB_28NM:
case BRCM_SATA_PHY_IPROC_NS2:
case BRCM_SATA_PHY_DSL_28NM:
@@ -287,6 +314,94 @@ static int brcm_stb_sata_init(struct brcm_sata_port *port)
return brcm_stb_sata_rxaeq_init(port);
}
+static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port)
+{
+ void __iomem *base = brcm_sata_pcb_base(port);
+ u32 tmp, value;
+
+ /* Reduce CP tail current to 1/16th of its default value */
+ brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0x141);
+
+ /* Turn off CP tail current boost */
+ brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL8, 0, 0xc006);
+
+ /* Set a specific AEQ equalizer value */
+ tmp = AEQ_FRC_EQ_FORCE_VAL | AEQ_FRC_EQ_FORCE;
+ brcm_sata_phy_wr(base, AEQRX_REG_BANK_0, AEQ_FRC_EQ,
+ ~(tmp | AEQ_RFZ_FRC_VAL |
+ AEQ_FRC_EQ_VAL_MASK << AEQ_FRC_EQ_VAL_SHIFT),
+ tmp | 32 << AEQ_FRC_EQ_VAL_SHIFT);
+
+ /* Set RX PPM val center frequency */
+ if (port->ssc_en)
+ value = 0x52;
+ else
+ value = 0;
+ brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CONTROL1,
+ ~RXPMD_RX_PPM_VAL_MASK, value);
+
+ /* Set proportional loop bandwith Gen1/2/3 */
+ tmp = RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G1_CDR_PROP_BW_SHIFT |
+ RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G2_CDR_PROP_BW_SHIFT |
+ RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G3_CDR_PROB_BW_SHIFT;
+ if (port->ssc_en)
+ value = 2 << RXPMD_G1_CDR_PROP_BW_SHIFT |
+ 2 << RXPMD_G2_CDR_PROP_BW_SHIFT |
+ 2 << RXPMD_G3_CDR_PROB_BW_SHIFT;
+ else
+ value = 1 << RXPMD_G1_CDR_PROP_BW_SHIFT |
+ 1 << RXPMD_G2_CDR_PROP_BW_SHIFT |
+ 1 << RXPMD_G3_CDR_PROB_BW_SHIFT;
+ brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_PROP_BW, ~tmp,
+ value);
+
+ /* Set CDR integral loop acquisition bandwidth for Gen1/2/3 */
+ tmp = RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT |
+ RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT |
+ RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT;
+ if (port->ssc_en)
+ value = 1 << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT |
+ 1 << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT |
+ 1 << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT;
+ else
+ value = 0;
+ brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_ACQ_INTEG_BW,
+ ~tmp, value);
+
+ /* Set CDR integral loop locking bandwidth to 1 for Gen 1/2/3 */
+ tmp = RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT |
+ RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT |
+ RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT;
+ if (port->ssc_en)
+ value = 1 << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT |
+ 1 << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT |
+ 1 << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT;
+ else
+ value = 0;
+ brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_LOCK_INTEG_BW,
+ ~tmp, value);
+
+ /* Set no guard band and clamp CDR */
+ tmp = RXPMD_MON_CORRECT_EN | RXPMD_MON_MARGIN_VAL_MASK;
+ if (port->ssc_en)
+ value = 0x51;
+ else
+ value = 0;
+ brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1,
+ ~tmp, RXPMD_MON_CORRECT_EN | value);
+
+ /* Turn on/off SSC */
+ brcm_sata_phy_wr(base, TX_REG_BANK, TX_ACTRL5, ~TX_ACTRL5_SSC_EN,
+ port->ssc_en ? TX_ACTRL5_SSC_EN : 0);
+
+ return 0;
+}
+
+static int brcm_stb_sata_16nm_init(struct brcm_sata_port *port)
+{
+ return brcm_stb_sata_16nm_ssc_init(port);
+}
+
/* NS2 SATA PLL1 defaults were characterized by H/W group */
#define NS2_PLL1_ACTRL2_MAGIC 0x1df8
#define NS2_PLL1_ACTRL3_MAGIC 0x2b00
@@ -544,6 +659,9 @@ static int brcm_sata_phy_init(struct phy *phy)
struct brcm_sata_port *port = phy_get_drvdata(phy);
switch (port->phy_priv->version) {
+ case BRCM_SATA_PHY_STB_16NM:
+ rc = brcm_stb_sata_16nm_init(port);
+ break;
case BRCM_SATA_PHY_STB_28NM:
case BRCM_SATA_PHY_STB_40NM:
rc = brcm_stb_sata_init(port);
@@ -601,6 +719,8 @@ static const struct phy_ops phy_ops = {
};
static const struct of_device_id brcm_sata_phy_of_match[] = {
+ { .compatible = "brcm,bcm7216-sata-phy",
+ .data = (void *)BRCM_SATA_PHY_STB_16NM },
{ .compatible = "brcm,bcm7445-sata-phy",
.data = (void *)BRCM_SATA_PHY_STB_28NM },
{ .compatible = "brcm,bcm7425-sata-phy",
--
2.17.1
