On Wed, Nov 6, 2019 at 4:09 PM Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
>
> It's typical for the QHP PHY to take slightly above 1ms to initialize,
> so increase the timeout of the PHY ready check to 10ms - as already done
> in the downstream PCIe driver.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Tested-by: Evan Green <evgreen@xxxxxxxxxxxx>
Should this have a Fixes tag for 14ced7e3a1ae9 ("phy: qcom-qmp:
Correct ready status, again")?
