The parse config function now performs action on the device either
reading or writing and a reset. If the regulator is managed it needs
to be turned on. So turn on the regulator if available if the parsing
fails then turn off the regulator.
Fixes: a5235f3c7c23 ("can: tcan45x: Make wake-up GPIO an optional GPIO")
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
v2 - Added error handling and moved regulator_get to probe
drivers/net/can/m_can/tcan4x5x.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/net/can/m_can/tcan4x5x.c b/drivers/net/can/m_can/tcan4x5x.c
index 4e1789ea2bc3..ddf7db498241 100644
--- a/drivers/net/can/m_can/tcan4x5x.c
+++ b/drivers/net/can/m_can/tcan4x5x.c
@@ -374,11 +374,6 @@ static int tcan4x5x_parse_config(struct m_can_classdev *cdev)
if (IS_ERR(tcan4x5x->device_state_gpio))
tcan4x5x->device_state_gpio = NULL;
- tcan4x5x->power = devm_regulator_get_optional(cdev->dev,
- "vsup");
- if (PTR_ERR(tcan4x5x->power) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
-
return 0;
}
@@ -412,6 +407,12 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
if (!priv)
return -ENOMEM;
+ priv->power = devm_regulator_get_optional(&spi->dev, "vsup");
+ if (PTR_ERR(priv->power) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ else
+ priv->power = NULL;
+
mcan_class->device_data = priv;
m_can_class_get_clocks(mcan_class);
@@ -451,11 +452,13 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
priv->regmap = devm_regmap_init(&spi->dev, &tcan4x5x_bus,
&spi->dev, &tcan4x5x_regmap);
- ret = tcan4x5x_parse_config(mcan_class);
+ ret = tcan4x5x_power_enable(priv->power, 1);
if (ret)
goto out_clk;
- tcan4x5x_power_enable(priv->power, 1);
+ ret = tcan4x5x_parse_config(mcan_class);
+ if (ret)
+ goto out_power;
ret = m_can_class_register(mcan_class);
if (ret)
--
2.23.0
