From: Dan Murphy <dmurphy@xxxxxx> Date: Mon, 9 Dec 2019 14:10:23 -0600 > The DP83867 supports both the RGMII and SGMII modes. The Tx and Rx FIFO depths > are configurable in these modes but may not applicable for both modes. > > When the device is configured for RGMII mode the Tx FIFO depth is applicable > and for SGMII mode both Tx and Rx FIFO depth settings are applicable. When > the driver was originally written only the RGMII device was available and there > were no standard fifo-depth DT properties. > > The patchset converts the special ti,fifo-depth property to the standard > tx-fifo-depth property while still allowing the ti,fifo-depth property to be > set as to maintain backward compatibility. > > In addition to this change the rx-fifo-depth property support was added and only > written when the device is configured for SGMII mode. Series applied, thanks.
