Hi, I just wanted to send a gentle ping for these two patches. Regards, Stefan On 20.09.19 13:52, Stefan Riedmueller wrote:
Add devicetree bindings for i.MX6 UL/ULL based phyCORE-i.MX6 UL/ULL and phyBOARD-Segin. Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx> --- Changes in v2: - Use seperate description for each board instead of squashing them into the standard board. --- Documentation/devicetree/bindings/arm/fsl.yaml | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 1b4b4e6573b5..c926ff6eac67 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -164,6 +164,15 @@ properties: - kontron,imx6ul-n6310-som # Kontron N6310 SOM - const: fsl,imx6ul+ - description: i.MX6UL PHYTEC phyBOARD-Segin+ items: + - enum: + - phytec,imx6ul-pbacd10-emmc + - phytec,imx6ul-pbacd10-nand + - const: phytec,imx6ul-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 UL + - const: phytec,imx6ul-pcl063 # PHYTEC phyCORE-i.MX 6UL + - const: fsl,imx6ul + - description: Kontron N6310 S Board items: - const: kontron,imx6ul-n6310-s @@ -183,6 +192,15 @@ properties: - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board - const: fsl,imx6ull+ - description: i.MX6ULL PHYTEC phyBOARD-Segin+ items: + - enum: + - phytec,imx6ull-pbacd10-emmc + - phytec,imx6ull-pbacd10-nand + - const: phytec,imx6ull-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 ULL + - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL + - const: fsl,imx6ull + - description: i.MX6ULZ based Boards items: - enum:
