The TI SoC reset controller support utilizes the
reset controller framework to give device drivers or
function drivers a common set of APIs to call to reset
a module.
The reset-ti is a common interface to the reset framework.
The register data is retrieved during initialization
of the reset driver through the reset-ti-data
file. The array of data is associated with the compatible from the
respective DT entry.
Once the data is available then this is derefenced within the common
interface.
The device driver has the ability to assert, deassert or perform a
complete reset.
This code was derived from previous work by Rajendra Nayak and Afzal Mohammed.
The code was changed to adopt to the reset core and abstract away the SoC information.
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
drivers/reset/Kconfig | 1 +
drivers/reset/Makefile | 1 +
drivers/reset/ti/Kconfig | 8 ++
drivers/reset/ti/Makefile | 1 +
drivers/reset/ti/reset-ti-data.h | 56 ++++++++
drivers/reset/ti/reset-ti.c | 267 ++++++++++++++++++++++++++++++++++++++
6 files changed, 334 insertions(+)
create mode 100644 drivers/reset/ti/Kconfig
create mode 100644 drivers/reset/ti/Makefile
create mode 100644 drivers/reset/ti/reset-ti-data.h
create mode 100644 drivers/reset/ti/reset-ti.c
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 0615f50..a58d789 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -13,3 +13,4 @@ menuconfig RESET_CONTROLLER
If unsure, say no.
source "drivers/reset/sti/Kconfig"
+source "drivers/reset/ti/Kconfig"
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 4f60caf..1c8c444 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_RESET_CONTROLLER) += core.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
+obj-$(CONFIG_RESET_TI) += ti/
diff --git a/drivers/reset/ti/Kconfig b/drivers/reset/ti/Kconfig
new file mode 100644
index 0000000..dcdce90
--- /dev/null
+++ b/drivers/reset/ti/Kconfig
@@ -0,0 +1,8 @@
+config RESET_TI
+ depends on RESET_CONTROLLER
+ bool "TI reset controller"
+ help
+ Reset controller support for TI SoC's
+
+ Reset controller found in TI's AM series of SoC's like
+ AM335x and AM43x and OMAP SoC's like OMAP5 and DRA7
diff --git a/drivers/reset/ti/Makefile b/drivers/reset/ti/Makefile
new file mode 100644
index 0000000..55ab3f5
--- /dev/null
+++ b/drivers/reset/ti/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_RESET_TI) += reset-ti.o
diff --git a/drivers/reset/ti/reset-ti-data.h b/drivers/reset/ti/reset-ti-data.h
new file mode 100644
index 0000000..4d2a6d5
--- /dev/null
+++ b/drivers/reset/ti/reset-ti-data.h
@@ -0,0 +1,56 @@
+/*
+ * PRCM reset driver for TI SoC's
+ *
+ * Copyright 2014 Texas Instruments Inc.
+ *
+ * Author: Dan Murphy <dmurphy@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _RESET_TI_DATA_H_
+#define _RESET_TI_DATA_H_
+
+#include <linux/kernel.h>
+#include <linux/reset-controller.h>
+
+/**
+ * struct ti_reset_reg_data - Structure of the reset register information
+ * for a particular SoC.
+ * @rstctrl_offs: This is the reset control offset value from
+ * from the parent reset node.
+ * @rstst_offs: This is the reset status offset value from
+ * from the parent reset node.
+ * @rstctrl_bit: This is the reset control bit for the module.
+ * @rstst_bit: This is the reset status bit for the module.
+ *
+ * This structure describes the reset register control and status offsets.
+ * The bits are also defined for the same.
+ */
+struct ti_reset_reg_data {
+ void __iomem *reg_base;
+ u32 rstctrl_offs;
+ u32 rstst_offs;
+ u32 rstctrl_bit;
+ u32 rstst_bit;
+};
+
+/**
+ * struct ti_reset_data - Structure that contains the reset register data
+ * as well as the total number of resets for a particular SoC.
+ * @reg_data: Pointer to the register data structure.
+ * @nr_resets: Total number of resets for the SoC in the reset array.
+ *
+ * This structure contains a pointer to the register data and the modules
+ * register base. The number of resets and reset controller device data is
+ * stored within this structure.
+ *
+ */
+struct ti_reset_data {
+ struct ti_reset_reg_data *reg_data;
+ struct reset_controller_dev rcdev;
+};
+
+#endif
diff --git a/drivers/reset/ti/reset-ti.c b/drivers/reset/ti/reset-ti.c
new file mode 100644
index 0000000..349f4fb
--- /dev/null
+++ b/drivers/reset/ti/reset-ti.c
@@ -0,0 +1,267 @@
+/*
+ * PRCM reset driver for TI SoC's
+ *
+ * Copyright 2014 Texas Instruments Inc.
+ *
+ * Author: Dan Murphy <dmurphy@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include "reset-ti-data.h"
+
+#define DRIVER_NAME "prcm_reset_ti"
+
+static struct ti_reset_data *ti_data;
+
+static int ti_reset_get_of_data(struct ti_reset_reg_data *reset_data,
+ unsigned long id)
+{
+ struct device_node *dev_node;
+ struct device_node *parent;
+ struct device_node *prcm_parent;
+ struct device_node *reset_parent;
+ int ret = -EINVAL;
+
+ dev_node = of_find_node_by_phandle((phandle) id);
+ if (!dev_node) {
+ pr_err("%s: Cannot find phandle node\n", __func__);
+ return ret;
+ }
+
+ /* node parent */
+ parent = of_get_parent(dev_node);
+ if (!parent) {
+ pr_err("%s: Cannot find parent reset node\n", __func__);
+ return ret;
+ }
+ /* prcm reset parent */
+ reset_parent = of_get_next_parent(parent);
+ if (!reset_parent) {
+ pr_err("%s: Cannot find parent reset node\n", __func__);
+ return ret;
+ }
+ /* PRCM Parent */
+ reset_parent = of_get_parent(reset_parent);
+ if (!prcm_parent) {
+ pr_err("%s: Cannot find parent reset node\n", __func__);
+ return ret;
+ }
+
+ reset_data->reg_base = of_iomap(reset_parent, 0);
+ if (!reset_data->reg_base) {
+ pr_err("%s: Cannot map reset parent.\n", __func__);
+ return ret;
+ }
+
+ ret = of_property_read_u32_index(parent, "reg", 0,
+ &reset_data->rstctrl_offs);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32_index(parent, "reg", 1,
+ &reset_data->rstst_offs);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32(dev_node, "control-bit",
+ &reset_data->rstctrl_bit);
+ if (ret < 0)
+ pr_err("%s: No entry in %s for rstst_offs\n", __func__,
+ dev_node->name);
+
+ ret = of_property_read_u32(dev_node, "status-bit",
+ &reset_data->rstst_bit);
+ if (ret < 0)
+ pr_err("%s: No entry in %s for rstst_offs\n", __func__,
+ dev_node->name);
+
+ return 0;
+}
+
+static void ti_reset_wait_on_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct ti_reset_reg_data *temp_reg_data;
+ void __iomem *status_reg;
+ u32 bit_mask = 0;
+ u32 val = 0;
+
+ temp_reg_data = kzalloc(sizeof(struct ti_reset_reg_data), GFP_KERNEL);
+ ti_reset_get_of_data(temp_reg_data, id);
+
+ /* Clear the reset status bit to reflect the current status */
+ status_reg = temp_reg_data->reg_base + temp_reg_data->rstst_offs;
+ bit_mask = temp_reg_data->rstst_bit;
+ do {
+ val = readl(status_reg);
+ if (!(val & (1 << bit_mask)))
+ break;
+ } while (1);
+}
+
+static int ti_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct ti_reset_reg_data *temp_reg_data;
+ void __iomem *reg;
+ void __iomem *status_reg;
+ u32 status_bit = 0;
+ u32 bit_mask = 0;
+ u32 val = 0;
+
+ temp_reg_data = kzalloc(sizeof(struct ti_reset_reg_data), GFP_KERNEL);
+ ti_reset_get_of_data(temp_reg_data, id);
+
+ /* Clear the reset status bit to reflect the current status */
+ status_reg = temp_reg_data->reg_base + temp_reg_data->rstst_offs;
+ status_bit = temp_reg_data->rstst_bit;
+ writel(1 << status_bit, status_reg);
+
+ reg = temp_reg_data->reg_base + temp_reg_data->rstctrl_offs;
+ bit_mask = temp_reg_data->rstctrl_bit;
+ val = readl(reg);
+ if (!(val & bit_mask)) {
+ val |= bit_mask;
+ writel(val, reg);
+ }
+
+ kfree(temp_reg_data);
+
+ return 0;
+}
+
+static int ti_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+
+ struct ti_reset_reg_data *temp_reg_data;
+ void __iomem *reg;
+ void __iomem *status_reg;
+ u32 status_bit = 0;
+ u32 bit_mask = 0;
+ u32 val = 0;
+
+ temp_reg_data = kzalloc(sizeof(struct ti_reset_reg_data), GFP_KERNEL);
+ ti_reset_get_of_data(temp_reg_data, id);
+
+ /* Clear the reset status bit to reflect the current status */
+ status_reg = temp_reg_data->reg_base + temp_reg_data->rstst_offs;
+ status_bit = temp_reg_data->rstst_bit;
+ writel(1 << status_bit, status_reg);
+
+ reg = temp_reg_data->reg_base + temp_reg_data->rstctrl_offs;
+ bit_mask = temp_reg_data->rstctrl_bit;
+ val = readl(reg);
+ if (val & bit_mask) {
+ val &= ~bit_mask;
+ writel(val, reg);
+ }
+
+ return 0;
+}
+
+static int ti_reset_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ ti_reset_assert(rcdev, id);
+ ti_reset_deassert(rcdev, id);
+ ti_reset_wait_on_reset(rcdev, id);
+
+ return 0;
+}
+
+static int ti_reset_xlate(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec)
+{
+ struct device_node *dev_node;
+
+ if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
+ return -EINVAL;
+
+ /* Verify that the phandle exists */
+ dev_node = of_find_node_by_phandle((phandle) reset_spec->args[0]);
+ if (!dev_node) {
+ pr_err("%s: Cannot find phandle node\n", __func__);
+ return -EINVAL;
+ }
+
+ return reset_spec->args[0];
+}
+
+static struct reset_control_ops ti_reset_ops = {
+ .reset = ti_reset_reset,
+ .assert = ti_reset_assert,
+ .deassert = ti_reset_deassert,
+};
+
+static int ti_reset_probe(struct platform_device *pdev)
+{
+ struct device_node *resets;
+
+ resets = of_find_node_by_name(NULL, "resets");
+ if (!resets) {
+ pr_err("%s: missing 'resets' child node.\n", __func__);
+ return -EINVAL;
+ }
+
+ ti_data = kzalloc(sizeof(*ti_data), GFP_KERNEL);
+ if (!ti_data)
+ return -ENOMEM;
+
+ ti_data->rcdev.owner = THIS_MODULE;
+ ti_data->rcdev.of_node = resets;
+ ti_data->rcdev.ops = &ti_reset_ops;
+
+ ti_data->rcdev.of_reset_n_cells = 1;
+ ti_data->rcdev.of_xlate = &ti_reset_xlate;
+
+ reset_controller_register(&ti_data->rcdev);
+
+ return 0;
+}
+
+static int ti_reset_remove(struct platform_device *pdev)
+{
+ reset_controller_unregister(&ti_data->rcdev);
+
+ return 0;
+}
+
+static const struct of_device_id ti_reset_of_match[] = {
+ { .compatible = "ti,omap5-prm" },
+ { .compatible = "ti,omap4-prm" },
+ { .compatible = "ti,omap5-prm" },
+ { .compatible = "ti,dra7-prm" },
+ { .compatible = "ti,am4-prcm" },
+ { .compatible = "ti,am3-prcm" },
+ {},
+};
+
+static struct platform_driver ti_reset_driver = {
+ .probe = ti_reset_probe,
+ .remove = ti_reset_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ti_reset_of_match),
+ },
+};
+module_platform_driver(ti_reset_driver);
+
+MODULE_DESCRIPTION("PRCM reset driver for TI SoCs");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
