On Thu, 5 Dec 2019 09:21:29 -0600 Rob Herring <robh@xxxxxxxxxx> wrote: > On Sat, Nov 23, 2019 at 08:35:10PM -0300, Rodrigo Carvalho wrote: > > This patch add device tree binding documentation for ADIS16240. > > > > Signed-off-by: Rodrigo Ribeiro Carvalho <rodrigorsdc@xxxxxxxxx> > > checkpatch.pl complains about a mismatch between the author and S-o-b. The open question on patch 1 is resolved, so respin with the points Rob pointed out her resolved and I'll pick up v6. Thanks, Jonathan > > > --- > > V5: > > - None > > > > .../bindings/iio/accel/adi,adis16240.yaml | 49 +++++++++++++++++++ > > 1 file changed, 49 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml > > > > diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml > > new file mode 100644 > > index 000000000000..8e902f7c49e6 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml > > @@ -0,0 +1,49 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > Dual license new bindings please: (GPL-2.0-only OR BSD-2-Clause) > > With that, > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/iio/accel/adi,adis16240.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: ADIS16240 Programmable Impact Sensor and Recorder driver > > + > > +maintainers: > > + - Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> > > + > > +description: | > > + ADIS16240 Programmable Impact Sensor and Recorder driver that supports > > + SPI interface. > > + https://www.analog.com/en/products/adis16240.html > > + > > +properties: > > + compatible: > > + enum: > > + - adi,adis16240 > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + > > +examples: > > + - | > > + #include <dt-bindings/gpio/gpio.h> > > + #include <dt-bindings/interrupt-controller/irq.h> > > + spi0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + /* Example for a SPI device node */ > > + accelerometer@0 { > > + compatible = "adi,adis16240"; > > + reg = <0>; > > + spi-max-frequency = <2500000>; > > + interrupt-parent = <&gpio0>; > > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + }; > > -- > > 2.24.0 > >
