Re: [PATCH v4 2/2] usb: overridable hub bInterval by device node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 6 Dec 2019, Ikjoon Jang wrote:

> On Thu, Dec 5, 2019 at 10:26 PM Johan Hovold <johan@xxxxxxxxxx> wrote:
> >
> > On Thu, Dec 05, 2019 at 03:32:38PM +0800, Ikjoon Jang wrote:
> > > On Wed, Dec 4, 2019 at 3:55 PM Johan Hovold <johan@xxxxxxxxxx> wrote:
> >
> > > > But related to my question above, why do you need to do this during
> > > > enumeration? Why not just set the lower interval value in the hub
> > > > driver?
> > >
> > > Because I want device tree's bInterval to be checked against the same rules
> > > defined in usb_parse_endpoint(). e.g. although hardware says its maximum
> > > is 255, but the practical limit is still 0 to 16, so the code can
> > > print warnings when bInterval from device node is too weird.
> >
> > But that could be handled refactoring the code in question or similar.
> >
> 
> Yes, that should be worked. I can't exactly figure out how to refactor
> the code for now, but maybe parsed endpoint descriptors are being
> checked with default hard wired bInterval value and after that
> an overridden value should be checked again.
> 
> Actually I don't care about the details of software policies. I just want
> all devices to be handled in the same manner without any further
> special treatments.
> 
> > The fundamental problem here is that you're using devicetree, which is
> > supposed to only describe the hardware, to encode policy which should be
> > deferred to user space.
> 
> The hub hardware has a default bInterval inside which is actually
> adjustable. So I can think setting bInterval is to describe the hardware
> rather than policy.

If the hardware is adjustable, why don't you adjust the hardware 
instead of changing the software?

> > So I think you need to figure out an interface that allows user space to
> > set the polling interval for any hub at runtime instead.
> 
> Changing the interval at runtime is an another way to solve the
> power consumption problem, but it's not so easy. At least xhci needs
> to restart an endpoint and no devices are changing the interval after
> enumeration stage.

Restarting endpoints is easy; just call usb_set_interface().

Alan Stern




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux