On Wed, 2019-10-23 at 18:39 +0800, Tomasz Figa wrote:
> Hi Xia,
>
> On Thu, Oct 17, 2019 at 04:40:38PM +0800, Xia Jiang wrote:
> > Add mtk jpeg encode v4l2 driver based on jpeg decode, because that jpeg
> > decode and encode have great similarities with function operation.
> >
> > Signed-off-by: Xia Jiang <xia.jiang@xxxxxxxxxxxx>
> > ---
> > v4: split mtk_jpeg_try_fmt_mplane() to two functions, one for encoder,
> > one for decoder.
> > split mtk_jpeg_set_default_params() to two functions, one for
> > encoder, one for decoder.
> > add cropping support for encoder in g/s_selection ioctls.
> > change exif mode support by using V4L2_JPEG_ACTIVE_MARKER_APP1.
> > change MTK_JPEG_MAX_WIDTH/MTK_JPEG_MAX_HEIGH from 8192 to 65535 by
> > specification.
> > move width shifting operation behind aligning operation in
> > mtk_jpeg_try_enc_fmt_mplane() for bug fix.
> > fix user abuseing data_offset issue for DMABUF in
> > mtk_jpeg_set_enc_src().
> > fix kbuild warings: change MTK_JPEG_MIN_HEIGHT/MTK_JPEG_MAX_HEIGHT
> > and MTK_JPEG_MIN_WIDTH/MTK_JPEG_MAX_WIDTH from
> > 'int' type to 'unsigned int' type.
> > fix msleadingly indented of 'else'.
> >
> > v3: delete Change-Id.
> > only test once handler->error after the last v4l2_ctrl_new_std().
> > seperate changes of v4l2-ctrls.c and v4l2-controls.h to new patch.
> >
> > v2: fix compliance test fail, check created buffer size in driver.
> > ---
> > drivers/media/platform/mtk-jpeg/Makefile | 5 +-
> > .../media/platform/mtk-jpeg/mtk_jpeg_core.c | 731 +++++++++++++++---
> > .../media/platform/mtk-jpeg/mtk_jpeg_core.h | 123 ++-
> > .../media/platform/mtk-jpeg/mtk_jpeg_dec_hw.h | 7 +-
> > .../media/platform/mtk-jpeg/mtk_jpeg_enc_hw.c | 175 +++++
> > .../media/platform/mtk-jpeg/mtk_jpeg_enc_hw.h | 60 ++
> > .../platform/mtk-jpeg/mtk_jpeg_enc_reg.h | 49 ++
> > 7 files changed, 1004 insertions(+), 146 deletions(-)
> > create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_enc_hw.c
> > create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_enc_hw.h
> > create mode 100644 drivers/media/platform/mtk-jpeg/mtk_jpeg_enc_reg.h
> >
>
> First of all, thanks for the patch!
>
> Please check my comments below.
>
> My general feeling about this code is that the encoder hardware block is
> completely orthogonal from the decoder block and there is very little code
> reuse from the original decoder driver.
>
> Moreover, a lot of existing code now needs if (decoder) { ... } else {... }
> segments, which complicates the code.
>
> Would it perhaps make sense to instead create a separate mtk-jpeg-enc
> driver?
>
> It would also give us a fresh start in terms of code quality, as the
> existing mtk-jpeg driver has a lot of quality issues unfortunately. (Some
> of my comments to this patch actually relate to the issues with the
> original code, not introduced by this patch, but we need to fix them if
> changing this driver already.)
>
Dear Tomasz,
I haved fixed the driver by following your advice in general.
Please check my reply below.
> > diff --git a/drivers/media/platform/mtk-jpeg/Makefile b/drivers/media/platform/mtk-jpeg/Makefile
> > index 48516dcf96e6..76c33aad0f3f 100644
> > --- a/drivers/media/platform/mtk-jpeg/Makefile
> > +++ b/drivers/media/platform/mtk-jpeg/Makefile
> > @@ -1,3 +1,6 @@
> > # SPDX-License-Identifier: GPL-2.0-only
> > -mtk_jpeg-objs := mtk_jpeg_core.o mtk_jpeg_dec_hw.o mtk_jpeg_dec_parse.o
> > +mtk_jpeg-objs := mtk_jpeg_core.o \
> > + mtk_jpeg_dec_hw.o \
> > + mtk_jpeg_dec_parse.o \
> > + mtk_jpeg_enc_hw.o
> > obj-$(CONFIG_VIDEO_MEDIATEK_JPEG) += mtk_jpeg.o
> > diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > index abc506a552c1..087b62bb1d5c 100644
> > --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > @@ -3,6 +3,7 @@
> > * Copyright (c) 2016 MediaTek Inc.
> > * Author: Ming Hsiu Tsai <minghsiu.tsai@xxxxxxxxxxxx>
> > * Rick Chang <rick.chang@xxxxxxxxxxxx>
> > + * Xia Jiang <xia.jiang@xxxxxxxxxxxx>
> > */
> >
> > #include <linux/clk.h>
> > @@ -23,6 +24,7 @@
> > #include <media/videobuf2-dma-contig.h>
> > #include <soc/mediatek/smi.h>
> >
> > +#include "mtk_jpeg_enc_hw.h"
> > #include "mtk_jpeg_dec_hw.h"
> > #include "mtk_jpeg_core.h"
> > #include "mtk_jpeg_dec_parse.h"
> > @@ -31,7 +33,8 @@ static struct mtk_jpeg_fmt mtk_jpeg_formats[] = {
> > {
> > .fourcc = V4L2_PIX_FMT_JPEG,
> > .colplanes = 1,
> > - .flags = MTK_JPEG_FMT_FLAG_DEC_OUTPUT,
> > + .flags = MTK_JPEG_FMT_FLAG_DEC_OUTPUT |
> > + MTK_JPEG_FMT_FLAG_ENC_CAPTURE,
> > },
> > {
> > .fourcc = V4L2_PIX_FMT_YUV420M,
> > @@ -51,6 +54,42 @@ static struct mtk_jpeg_fmt mtk_jpeg_formats[] = {
> > .v_align = 3,
> > .flags = MTK_JPEG_FMT_FLAG_DEC_CAPTURE,
> > },
> > + {
> > + .fourcc = V4L2_PIX_FMT_NV12M,
> > + .h_sample = {4, 2, 2},
> > + .v_sample = {4, 2, 2},
> > + .colplanes = 2,
> > + .h_align = 4,
> > + .v_align = 4,
> > + .flags = MTK_JPEG_FMT_FLAG_ENC_OUTPUT,
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_NV21M,
> > + .h_sample = {4, 2, 2},
> > + .v_sample = {4, 2, 2},
> > + .colplanes = 2,
> > + .h_align = 4,
> > + .v_align = 4,
> > + .flags = MTK_JPEG_FMT_FLAG_ENC_OUTPUT,
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_YUYV,
> > + .h_sample = {4, 2, 2},
> > + .v_sample = {4, 4, 4},
> > + .colplanes = 1,
> > + .h_align = 4,
> > + .v_align = 3,
> > + .flags = MTK_JPEG_FMT_FLAG_ENC_OUTPUT,
> > + },
> > + {
> > + .fourcc = V4L2_PIX_FMT_YVYU,
> > + .h_sample = {4, 2, 2},
> > + .v_sample = {4, 4, 4},
> > + .colplanes = 1,
> > + .h_align = 4,
> > + .v_align = 3,
> > + .flags = MTK_JPEG_FMT_FLAG_ENC_OUTPUT,
> > + },
> > };
> >
> > #define MTK_JPEG_NUM_FORMATS ARRAY_SIZE(mtk_jpeg_formats)
> > @@ -65,11 +104,19 @@ struct mtk_jpeg_src_buf {
> > struct list_head list;
> > int flags;
> > struct mtk_jpeg_dec_param dec_param;
> > + struct mtk_jpeg_enc_param enc_param;
> > };
> >
> > +#define MTK_MAX_CTRLS_HINT 20
>
> I can see only 3 controls registered by this driver. Moreover, wouldn't it
> be more readable if the v4l2_ctrl_handler_init() call had "3" directly
> passed to it? Then the reader can see that there are 3 calls to
> v4l2_ctrl_new_std() just below it and the meaning behind the value of 3 is
> clear.
done
>
> > +
> > static int debug;
> > module_param(debug, int, 0644);
> >
> > +static inline struct mtk_jpeg_ctx *ctrl_to_ctx(struct v4l2_ctrl *ctrl)
> > +{
> > + return container_of(ctrl->handler, struct mtk_jpeg_ctx, ctrl_hdl);
> > +}
> > +
> > static inline struct mtk_jpeg_ctx *mtk_jpeg_fh_to_ctx(struct v4l2_fh *fh)
> > {
> > return container_of(fh, struct mtk_jpeg_ctx, fh);
> > @@ -86,14 +133,74 @@ static int mtk_jpeg_querycap(struct file *file, void *priv,
> > {
> > struct mtk_jpeg_dev *jpeg = video_drvdata(file);
> >
> > - strscpy(cap->driver, MTK_JPEG_NAME " decoder", sizeof(cap->driver));
> > - strscpy(cap->card, MTK_JPEG_NAME " decoder", sizeof(cap->card));
> > + strscpy(cap->driver, MTK_JPEG_NAME, sizeof(cap->driver));
> > + if (jpeg->mode == MTK_JPEG_ENC)
> > + strscpy(cap->card, MTK_JPEG_NAME " encoder", sizeof(cap->card));
> > + else
> > + strscpy(cap->card, MTK_JPEG_NAME " decoder", sizeof(cap->card));
> > snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
> > dev_name(jpeg->dev));
> >
> > return 0;
> > }
> >
> > +static int vidioc_jpeg_s_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > + struct mtk_jpeg_ctx *ctx = ctrl_to_ctx(ctrl);
> > + struct jpeg_enc_param *p = &ctx->jpeg_param;
> > + struct mtk_jpeg_dev *jpeg = ctx->jpeg;
> > + int ret = 0;
> > +
> > + switch (ctrl->id) {
> > + case V4L2_CID_JPEG_RESTART_INTERVAL:
> > + p->restart_interval = ctrl->val;
> > + break;
> > + case V4L2_CID_JPEG_COMPRESSION_QUALITY:
> > + p->enc_quality = ctrl->val;
> > + break;
> > + case V4L2_CID_JPEG_ACTIVE_MARKER:
> > + p->enable_exif = ctrl->val & V4L2_JPEG_ACTIVE_MARKER_APP1;
> > + break;
> > + }
> > +
> > + v4l2_dbg(2, debug, &jpeg->v4l2_dev, "%s val = %d",
> > + v4l2_ctrl_get_name(ctrl->id), ctrl->val);
>
> Generic V4L2 logs can already dump all V4L2 IOCTL calls, so perhaps we
> could remove this?
done
>
> > +
> > + return ret;
> > +}
> > +
> > +static const struct v4l2_ctrl_ops mtk_jpeg_ctrl_ops = {
> > + .s_ctrl = vidioc_jpeg_s_ctrl,
> > +};
> > +
> > +int mtk_jpeg_ctrls_setup(struct mtk_jpeg_ctx *ctx)
> > +{
> > + const struct v4l2_ctrl_ops *ops = &mtk_jpeg_ctrl_ops;
> > + struct v4l2_ctrl_handler *handler = &ctx->ctrl_hdl;
> > + struct mtk_jpeg_dev *jpeg = ctx->jpeg;
> > +
> > + v4l2_ctrl_handler_init(handler, MTK_MAX_CTRLS_HINT);
> > +
> > + if (jpeg->mode == MTK_JPEG_ENC) {
> > + v4l2_ctrl_new_std(handler, ops, V4L2_CID_JPEG_RESTART_INTERVAL,
> > + 0, 100, 1, 0);
> > + v4l2_ctrl_new_std(handler, ops,
> > + V4L2_CID_JPEG_COMPRESSION_QUALITY, 48, 100, 1,
> > + 90);
> > + v4l2_ctrl_new_std(handler, ops, V4L2_CID_JPEG_ACTIVE_MARKER, 0,
> > + V4L2_JPEG_ACTIVE_MARKER_APP1, 0, 0);
> > +
> > + if (handler->error) {
> > + v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
> > + return handler->error;
> > + }
> > + }
> > +
> > + v4l2_ctrl_handler_setup(&ctx->ctrl_hdl);
> > +
> > + return 0;
> > +}
> > +
> > static int mtk_jpeg_enum_fmt(struct mtk_jpeg_fmt *mtk_jpeg_formats, int n,
> > struct v4l2_fmtdesc *f, u32 type)
> > {
> > @@ -118,23 +225,29 @@ static int mtk_jpeg_enum_fmt(struct mtk_jpeg_fmt *mtk_jpeg_formats, int n,
> > static int mtk_jpeg_enum_fmt_vid_cap(struct file *file, void *priv,
> > struct v4l2_fmtdesc *f)
> > {
> > + struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
> > +
> > return mtk_jpeg_enum_fmt(mtk_jpeg_formats, MTK_JPEG_NUM_FORMATS, f,
> > + ctx->jpeg->mode == MTK_JPEG_ENC ?
> > + MTK_JPEG_FMT_FLAG_ENC_CAPTURE :
> > MTK_JPEG_FMT_FLAG_DEC_CAPTURE);
> > }
> >
> > static int mtk_jpeg_enum_fmt_vid_out(struct file *file, void *priv,
> > struct v4l2_fmtdesc *f)
> > {
> > + struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
> > +
> > return mtk_jpeg_enum_fmt(mtk_jpeg_formats, MTK_JPEG_NUM_FORMATS, f,
> > + ctx->jpeg->mode == MTK_JPEG_ENC ?
> > + MTK_JPEG_FMT_FLAG_ENC_OUTPUT :
> > MTK_JPEG_FMT_FLAG_DEC_OUTPUT);
> > }
> >
> > -static struct mtk_jpeg_q_data *mtk_jpeg_get_q_data(struct mtk_jpeg_ctx *ctx,
> > - enum v4l2_buf_type type)
> > +static struct mtk_jpeg_q_data *
> > +mtk_jpeg_get_q_data(struct mtk_jpeg_ctx *ctx, enum v4l2_buf_type type)
> > {
> > - if (V4L2_TYPE_IS_OUTPUT(type))
> > - return &ctx->out_q;
> > - return &ctx->cap_q;
> > + return V4L2_TYPE_IS_OUTPUT(type) ? &ctx->out_q : &ctx->cap_q;
>
> Is this change necessary?
cancel this change.
>
> > }
> >
> > static struct mtk_jpeg_fmt *mtk_jpeg_find_format(struct mtk_jpeg_ctx *ctx,
> > @@ -143,9 +256,14 @@ static struct mtk_jpeg_fmt *mtk_jpeg_find_format(struct mtk_jpeg_ctx *ctx,
> > {
> > unsigned int k, fmt_flag;
> >
> > - fmt_flag = (fmt_type == MTK_JPEG_FMT_TYPE_OUTPUT) ?
> > - MTK_JPEG_FMT_FLAG_DEC_OUTPUT :
> > - MTK_JPEG_FMT_FLAG_DEC_CAPTURE;
> > + if (ctx->jpeg->mode == MTK_JPEG_ENC)
> > + fmt_flag = (fmt_type == MTK_JPEG_FMT_TYPE_OUTPUT) ?
> > + MTK_JPEG_FMT_FLAG_ENC_OUTPUT :
> > + MTK_JPEG_FMT_FLAG_ENC_CAPTURE;
> > + else
> > + fmt_flag = (fmt_type == MTK_JPEG_FMT_TYPE_OUTPUT) ?
> > + MTK_JPEG_FMT_FLAG_DEC_OUTPUT :
> > + MTK_JPEG_FMT_FLAG_DEC_CAPTURE;
> >
> > for (k = 0; k < MTK_JPEG_NUM_FORMATS; k++) {
> > struct mtk_jpeg_fmt *fmt = &mtk_jpeg_formats[k];
> > @@ -196,9 +314,99 @@ static void mtk_jpeg_adjust_fmt_mplane(struct mtk_jpeg_ctx *ctx,
> > }
> > }
> >
> > -static int mtk_jpeg_try_fmt_mplane(struct v4l2_format *f,
> > - struct mtk_jpeg_fmt *fmt,
> > - struct mtk_jpeg_ctx *ctx, int q_type)
> > +static int mtk_jpeg_try_enc_fmt_mplane(struct v4l2_format *f,
> > + struct mtk_jpeg_fmt *fmt,
> > + struct mtk_jpeg_ctx *ctx, int q_type)
> > +{
> > + struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
> > + struct mtk_jpeg_dev *jpeg = ctx->jpeg;
> > + int i, align_w, align_h;
> > +
> > + memset(pix_mp->reserved, 0, sizeof(pix_mp->reserved));
>
> The core already takes care of zeroing this.
keep this, cancel following zeroing pix_mp->reserved.
>
> > + pix_mp->field = V4L2_FIELD_NONE;
> > +
> > + if (ctx->state != MTK_JPEG_INIT) {
> > + mtk_jpeg_adjust_fmt_mplane(ctx, f);
> > + goto end;
> > + }
> > +
> > + pix_mp->num_planes = fmt->colplanes;
> > + pix_mp->pixelformat = fmt->fourcc;
> > +
> > + if (q_type == MTK_JPEG_FMT_TYPE_OUTPUT) {
>
> There are separate ops for out_mplane and cap_mplane. Wouldn't it make more
> sense to have them handled in separate functions?
don't separate ops for out_mplane and cap_mplane, because the modified
code of this function as your following advice is brief.
>
> > + pix_mp->height = clamp(pix_mp->height, MTK_JPEG_MIN_HEIGHT,
> > + MTK_JPEG_MAX_HEIGHT);
> > + pix_mp->width = clamp(pix_mp->width, MTK_JPEG_MIN_WIDTH,
> > + MTK_JPEG_MAX_WIDTH);
> > + align_w = pix_mp->width;
> > + align_h = pix_mp->height;
> > + align_w = round_up(align_w, 2);
> > + if (pix_mp->num_planes == 1U) {
> > + mtk_jpeg_bound_align_image(&align_w,
> > + MTK_JPEG_MIN_WIDTH,
> > + MTK_JPEG_MAX_WIDTH, 5,
> > + &align_h,
> > + MTK_JPEG_MIN_HEIGHT,
> > + MTK_JPEG_MAX_HEIGHT, 3);
>
> I'd suggest removing the mtk_jpeg_bound_align_image(), as we don't need the
> complex computation that's happening there. All we need is:
done
>
> pix_mp->height = clamp(round_up(pix_mp->height, 8), MTK_JPEG_MIN_HEIGHT,
> MTK_JPEG_MAX_HEIGHT);
> pix_mp->width = clamp(round_up(pix_mp->width, 32), MTK_JPEG_MIN_WIDTH,
> MTK_JPEG_MAX_WIDTH);
>
> Note that contrary to the existing code, the aligned width and height
> _must_ be returned back to the application and not only hidden inside
> bytesperline and sizeimage.
done
>
> > + align_w = align_w << 1;
> > + pix_mp->plane_fmt[0].bytesperline = align_w;
> > + pix_mp->plane_fmt[0].sizeimage = align_w * align_h;
> > + } else if (pix_mp->num_planes == 2U) {
> > + mtk_jpeg_bound_align_image(&align_w,
> > + MTK_JPEG_MIN_WIDTH,
> > + MTK_JPEG_MAX_WIDTH, 4,
> > + &align_h,
> > + MTK_JPEG_MIN_HEIGHT,
> > + MTK_JPEG_MAX_HEIGHT, 4);
> > + pix_mp->plane_fmt[0].bytesperline = align_w;
> > + pix_mp->plane_fmt[0].sizeimage = align_w * align_h;
> > + pix_mp->plane_fmt[1].bytesperline = align_w;
> > + pix_mp->plane_fmt[1].sizeimage =
> > + (align_w * align_h) / 2;
>
> Could we parametrize these calculations from the format array and use a for
> loop over the planes instead?
>
> > + } else {
> > + v4l2_err(&jpeg->v4l2_dev,
> > + "Unsupport num planes = %d\n",
> > + pix_mp->num_planes);
>
> Isn't this impossible?
yes, deleted it.
>
> > + }
> > + } else {
> > + mtk_jpeg_bound_align_image(&pix_mp->width, MTK_JPEG_MIN_WIDTH,
> > + MTK_JPEG_MAX_WIDTH, 0,
> > + &pix_mp->height,
> > + MTK_JPEG_MIN_HEIGHT,
> > + MTK_JPEG_MAX_HEIGHT, 0);
>
> Same here, could we just use clamp() directly?
done
>
> > +
> > + if (fmt->fourcc == V4L2_PIX_FMT_JPEG) {
>
> Can we have any other format on this queue?
for jpeg enc ,only V4L2_PIX_FMT_JPEG format
>
> > + pix_mp->plane_fmt[0].bytesperline = 0;
> > + pix_mp->plane_fmt[0].sizeimage =
> > + mtk_jpeg_align(pix_mp->plane_fmt[0].sizeimage,
> > + 128);
>
> What's mtk_jpeg_align()? Why couldn't we just use round_up() directly?
done
>
> > + if (pix_mp->plane_fmt[0].sizeimage == 0)
> > + pix_mp->plane_fmt[0].sizeimage =
> > + MTK_JPEG_DEFAULT_SIZEIMAGE;
>
> I think there is some reasonable upper bound of the compressed image size
> given the resolution. Could we use that here instead?
>
> > + }
> > + }
> > +
> > + for (i = 0; i < fmt->colplanes; i++) {
> > + struct v4l2_plane_pix_format *pfmt =
> > + &pix_mp->plane_fmt[i];
> > + memset(pfmt->reserved, 0, sizeof(pfmt->reserved));
>
> The core already zeroes this.
canceled this
>
> > + }
> > +end:
> > + v4l2_dbg(2, debug, &jpeg->v4l2_dev, "wxh:%ux%u\n",
> > + pix_mp->width, pix_mp->height);
> > + for (i = 0; i < pix_mp->num_planes; i++) {
> > + v4l2_dbg(2, debug, &jpeg->v4l2_dev,
> > + "plane[%d] bpl=%u, size=%u\n",
> > + i,
> > + pix_mp->plane_fmt[i].bytesperline,
> > + pix_mp->plane_fmt[i].sizeimage);
> > + }
>
> Generic V4L2 debug logs already print this.
canceled this
>
> > + return 0;
> > +}
> > +
> > +static int mtk_jpeg_try_dec_fmt_mplane(struct v4l2_format *f,
> > + struct mtk_jpeg_fmt *fmt,
> > + struct mtk_jpeg_ctx *ctx, int q_type)
> > {
> > struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
> > struct mtk_jpeg_dev *jpeg = ctx->jpeg;
> > @@ -233,6 +441,10 @@ static int mtk_jpeg_try_fmt_mplane(struct v4l2_format *f,
> > }
> >
> > /* type is MTK_JPEG_FMT_TYPE_CAPTURE */
> > + pix_mp->height = clamp(pix_mp->height, MTK_JPEG_MIN_HEIGHT,
> > + MTK_JPEG_MAX_HEIGHT);
> > + pix_mp->width = clamp(pix_mp->width, MTK_JPEG_MIN_WIDTH,
> > + MTK_JPEG_MAX_WIDTH);
>
> Why is this needed? Doesn't the call below already include these clamps?
cancel this
>
> (That said, it would be cleaner if mtk_jpeg_bound_align_image() was removed
> and replaced with clamp() calls directly, because of the confusing behavior
> of v4l_bound_align_image().
done
>
> > mtk_jpeg_bound_align_image(&pix_mp->width, MTK_JPEG_MIN_WIDTH,
> > MTK_JPEG_MAX_WIDTH, fmt->h_align,
> > &pix_mp->height, MTK_JPEG_MIN_HEIGHT,
> > @@ -316,6 +528,7 @@ static int mtk_jpeg_try_fmt_vid_cap_mplane(struct file *file, void *priv,
> > {
> > struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
> > struct mtk_jpeg_fmt *fmt;
> > + struct mtk_jpeg_dev *jpeg = ctx->jpeg;
> >
> > fmt = mtk_jpeg_find_format(ctx, f->fmt.pix_mp.pixelformat,
> > MTK_JPEG_FMT_TYPE_CAPTURE);
> > @@ -329,7 +542,12 @@ static int mtk_jpeg_try_fmt_vid_cap_mplane(struct file *file, void *priv,
> > (fmt->fourcc >> 16 & 0xff),
> > (fmt->fourcc >> 24 & 0xff));
> >
> > - return mtk_jpeg_try_fmt_mplane(f, fmt, ctx, MTK_JPEG_FMT_TYPE_CAPTURE);
> > +
> > + return jpeg->mode == MTK_JPEG_ENC ?
> > + mtk_jpeg_try_enc_fmt_mplane(f, fmt, ctx,
> > + MTK_JPEG_FMT_TYPE_CAPTURE) :
> > + mtk_jpeg_try_dec_fmt_mplane(f, fmt, ctx,
> > + MTK_JPEG_FMT_TYPE_CAPTURE);
>
> The ternary operator isn't a universal replacement for if/else. It should
> be limited to simple expressions only. Function calls don't count as simple
> expressions.
used if/else to replace this
>
> > }
> >
> > static int mtk_jpeg_try_fmt_vid_out_mplane(struct file *file, void *priv,
> > @@ -337,6 +555,7 @@ static int mtk_jpeg_try_fmt_vid_out_mplane(struct file *file, void *priv,
> > {
> > struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
> > struct mtk_jpeg_fmt *fmt;
> > + struct mtk_jpeg_dev *jpeg = ctx->jpeg;
> >
> > fmt = mtk_jpeg_find_format(ctx, f->fmt.pix_mp.pixelformat,
> > MTK_JPEG_FMT_TYPE_OUTPUT);
> > @@ -350,7 +569,12 @@ static int mtk_jpeg_try_fmt_vid_out_mplane(struct file *file, void *priv,
> > (fmt->fourcc >> 16 & 0xff),
> > (fmt->fourcc >> 24 & 0xff));
> >
> > - return mtk_jpeg_try_fmt_mplane(f, fmt, ctx, MTK_JPEG_FMT_TYPE_OUTPUT);
> > + return jpeg->mode == MTK_JPEG_ENC ?
> > + mtk_jpeg_try_enc_fmt_mplane(f, fmt, ctx,
> > + MTK_JPEG_FMT_TYPE_OUTPUT) :
> > + mtk_jpeg_try_dec_fmt_mplane(f, fmt, ctx,
> > + MTK_JPEG_FMT_TYPE_OUTPUT);
>
> Ditto.
done
>
> > +
>
> Unnecessary blank line.
deleted
>
> > }
> >
> > static int mtk_jpeg_s_fmt_mplane(struct mtk_jpeg_ctx *ctx,
> > @@ -455,11 +679,19 @@ static int mtk_jpeg_g_selection(struct file *file, void *priv,
> > struct v4l2_selection *s)
> > {
> > struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
> > + struct mtk_jpeg_dev *jpeg = ctx->jpeg;
> >
> > - if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
> > + if (jpeg->mode == MTK_JPEG_ENC && s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
> > + return -EINVAL;
> > +
> > + if (jpeg->mode == MTK_JPEG_DEC &&
> > + s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
> > return -EINVAL;
> >
> > switch (s->target) {
> > + case V4L2_SEL_TGT_CROP:
> > + case V4L2_SEL_TGT_CROP_BOUNDS:
> > + case V4L2_SEL_TGT_CROP_DEFAULT:
> > case V4L2_SEL_TGT_COMPOSE:
> > case V4L2_SEL_TGT_COMPOSE_DEFAULT:
> > s->r.width = ctx->out_q.w;
> > @@ -484,11 +716,17 @@ static int mtk_jpeg_s_selection(struct file *file, void *priv,
> > struct v4l2_selection *s)
> > {
> > struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv);
> > + struct mtk_jpeg_dev *jpeg = ctx->jpeg;
> >
> > - if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
> > + if (jpeg->mode == MTK_JPEG_ENC && s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
> > + return -EINVAL;
> > +
> > + if (jpeg->mode == MTK_JPEG_DEC &&
> > + s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
> > return -EINVAL;
> >
> > switch (s->target) {
> > + case V4L2_SEL_TGT_CROP:
> > case V4L2_SEL_TGT_COMPOSE:
> > s->r.left = 0;
> > s->r.top = 0;
> > @@ -658,10 +896,92 @@ static void mtk_jpeg_set_queue_data(struct mtk_jpeg_ctx *ctx,
> > param->dec_w, param->dec_h);
> > }
> >
> > +static void mtk_jpeg_set_param(struct mtk_jpeg_ctx *ctx,
> > + struct mtk_jpeg_enc_param *param)
> > +{
> > + struct mtk_jpeg_q_data *q_data_src = &ctx->out_q;
> > + struct jpeg_enc_param *jpeg_params = &ctx->jpeg_param;
> > + struct mtk_jpeg_dev *jpeg = ctx->jpeg;
> > + u32 width_even;
> > + u32 is_420;
> > + u32 padding_width;
> > + u32 padding_height;
> > +
> > + switch (q_data_src->fmt->fourcc) {
> > + case V4L2_PIX_FMT_YUYV:
> > + param->enc_format = JPEG_YUV_FORMAT_YUYV;
> > + break;
> > + case V4L2_PIX_FMT_YVYU:
> > + param->enc_format = JPEG_YUV_FORMAT_YVYU;
> > + break;
> > + case V4L2_PIX_FMT_NV12M:
> > + param->enc_format = JPEG_YUV_FORMAT_NV12;
> > + break;
> > + case V4L2_PIX_FMT_NV21M:
> > + param->enc_format = JPEG_YUV_FORMAT_NV12;
> > + break;
>
> Could we include enc_format in the mtk_jpeg_fmt struct and take it from
> there, eliminating the need for a switch over all supported formats?
the enc_format is just for encoder hw,but mtk_jpeg_fmt_struct is for
encoder and decoder,so I didn't modify this, but I canceled this
function as your advice
>
> > + default:
> > + v4l2_err(&jpeg->v4l2_dev, "Unsupport fourcc =%d\n",
> > + q_data_src->fmt->fourcc);
> > + break;
>
> Isn't this impossible?
yes
>
> > + }
> > + param->enc_w = q_data_src->w;
> > + param->enc_h = q_data_src->h;
> > +
> > + if (jpeg_params->enc_quality >= 97)
> > + param->enc_quality = JPEG_ENCODE_QUALITY_Q97;
> > + else if (jpeg_params->enc_quality >= 95)
> > + param->enc_quality = JPEG_ENCODE_QUALITY_Q95;
>
> I'm wondering if the application requests 96, it doesn't expect the quality to
> be _at_least_ 96.
our jpeg enc hw do not support quality 96,only support 15 kinds of quant
table listed here, so if the application requests 96,a nearest and
highest quality will be given.
>
> > + else if (jpeg_params->enc_quality >= 92)
> > + param->enc_quality = JPEG_ENCODE_QUALITY_Q92;
> > + else if (jpeg_params->enc_quality >= 90)
> > + param->enc_quality = JPEG_ENCODE_QUALITY_Q90;
> > + else if (jpeg_params->enc_quality >= 87)
> > + param->enc_quality = JPEG_ENCODE_QUALITY_Q87;
> > + else if (jpeg_params->enc_quality >= 84)
> > + param->enc_quality = JPEG_ENCODE_QUALITY_Q84;
> > + else if (jpeg_params->enc_quality >= 80)
> > + param->enc_quality = JPEG_ENCODE_QUALITY_Q80;
> > + else if (jpeg_params->enc_quality >= 74)
> > + param->enc_quality = JPEG_ENCODE_QUALITY_Q74;
> > + else if (jpeg_params->enc_quality >= 64)
> > + param->enc_quality = JPEG_ENCODE_QUALITY_Q64;
> > + else if (jpeg_params->enc_quality >= 60)
> > + param->enc_quality = JPEG_ENCODE_QUALITY_Q60;
> > + else
> > + param->enc_quality = JPEG_ENCODE_QUALITY_Q48;
>
> We could put this in a sorted array of <quality paramter, hardware value>
> pairs and use a simple for loop instead.
done
>
> > +
> > + param->enable_exif = jpeg_params->enable_exif;
> > + param->restart_interval = jpeg_params->restart_interval;
> > +
> > + width_even = ((param->enc_w + 1) >> 1) << 1;
>
> Isn't this equivalent to round_up(param->enc_w, 2)?
yes
>
> > + is_420 = (param->enc_format == JPEG_YUV_FORMAT_NV12 ||
> > + param->enc_format == JPEG_YUV_FORMAT_NV12) ? 1 : 0;
> > + padding_width = mtk_jpeg_align(param->enc_w, 16);
> > + padding_height = mtk_jpeg_align(param->enc_h, is_420 ? 16 : 8);
> > + if (!is_420)
> > + width_even = width_even << 1;
> > +
> > + param->img_stride = mtk_jpeg_align(width_even, (is_420 ? 16 : 32));
>
> Isn't this the same as bytesperline in the v4l2_pix_fmt_mplane struct?
yes
>
> > + param->mem_stride = mtk_jpeg_align(width_even, (is_420 ? 16 : 32));
>
> What's the difference between img_stride and mem_stride?
In theory, mem_stride need >= img_stride,but we use the same is ok
>
> > + param->total_encdu =
> > + ((padding_width >> 4) * (padding_height >> (is_420 ? 4 : 3)) *
> > + (is_420 ? 6 : 4)) - 1;
>
> The comment above the struct says this is the total number of 8x8 blocks.
> Why would it depend on whether the format is YUV 4:2:0? Since we should
> have already aligned the width and height in try_fmt, this should be as
> simple as (width / 8) * (height / 8).
becuase the image size is w*h*1.5 for yuv420 format, but w*h*2 for
yuv422,so for yuv420: w_16/8*h_16/8*1.5-1(because the hw will start at
number 0), yuv422: w_32/8*h_8/8*2-1,this number is equal to my code.
>
> > +
> > + v4l2_dbg(0, 2, &jpeg->v4l2_dev, "fmt %d, w,h %d,%d, enable_exif %d,",
> > + "enc_quality %d, restart_interval %d,img_stride %d,",
> > + "mem_stride %d,totalEncDu %d\n",
> > + param->enc_format, param->enc_w, param->enc_h,
> > + param->enable_exif, param->enc_quality,
> > + param->restart_interval, param->img_stride,
> > + param->mem_stride, param->total_encdu);
> > +}
>
> Do we need this intermediate step, with an intermediate representation of
> the parameters? Couldn't we just program the registers directly based on
> the original V4L2 values, as other drivers normally do?
canceled this
>
> > +
> > static void mtk_jpeg_buf_queue(struct vb2_buffer *vb)
> > {
> > struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> > struct mtk_jpeg_dec_param *param;
> > + struct mtk_jpeg_enc_param *enc_param;
> > struct mtk_jpeg_dev *jpeg = ctx->jpeg;
> > struct mtk_jpeg_src_buf *jpeg_src_buf;
> > bool header_valid;
> > @@ -673,29 +993,45 @@ static void mtk_jpeg_buf_queue(struct vb2_buffer *vb)
> > goto end;
> >
> > jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(vb);
> > - param = &jpeg_src_buf->dec_param;
> > - memset(param, 0, sizeof(*param));
> > -
> > - if (jpeg_src_buf->flags & MTK_JPEG_BUF_FLAGS_LAST_FRAME) {
> > - v4l2_dbg(1, debug, &jpeg->v4l2_dev, "Got eos\n");
> > - goto end;
> > - }
> > - header_valid = mtk_jpeg_parse(param, (u8 *)vb2_plane_vaddr(vb, 0),
> > - vb2_get_plane_payload(vb, 0));
> > - if (!header_valid) {
> > - v4l2_err(&jpeg->v4l2_dev, "Header invalid.\n");
> > - vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
> > - return;
> > - }
> > -
> > - if (ctx->state == MTK_JPEG_INIT) {
> > - struct vb2_queue *dst_vq = v4l2_m2m_get_vq(
> > - ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
> > + if (jpeg->mode == MTK_JPEG_ENC) {
>
> nit: Double space after ==.
deleted it
>
> > + enc_param = &jpeg_src_buf->enc_param;
> > + memset(enc_param, 0, sizeof(*enc_param));
> > + mtk_jpeg_set_param(ctx, enc_param);
> > + if (jpeg_src_buf->flags & MTK_JPEG_BUF_FLAGS_LAST_FRAME) {
> > + v4l2_dbg(1, debug, &jpeg->v4l2_dev, "Got eos");
> > + goto end;
>
> Shouldn't we still change the state to RUNNING? The last frame still needs
> to be encoded and the condition for getting back to the INIT state is
> stopping the streaming.
done
> > + }
> > + if (ctx->state == MTK_JPEG_INIT)
> > + ctx->state = MTK_JPEG_RUNNING;
> > + } else {
> > + param = &jpeg_src_buf->dec_param;
> > + memset(param, 0, sizeof(*param));
> > +
> > + if (jpeg_src_buf->flags & MTK_JPEG_BUF_FLAGS_LAST_FRAME) {
> > + v4l2_dbg(1, debug, &jpeg->v4l2_dev, "Got eos\n");
> > + goto end;
> > + }
> > + header_valid = mtk_jpeg_parse(param,
> > + (u8 *)vb2_plane_vaddr(vb, 0),
> > + vb2_get_plane_payload(vb, 0));
> > + if (!header_valid) {
> > + v4l2_err(&jpeg->v4l2_dev, "Header invalid.\n");
> > + vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
> > + return;
> > + }
> >
> > - mtk_jpeg_queue_src_chg_event(ctx);
> > - mtk_jpeg_set_queue_data(ctx, param);
> > - ctx->state = vb2_is_streaming(dst_vq) ?
> > - MTK_JPEG_SOURCE_CHANGE : MTK_JPEG_RUNNING;
> > + if (ctx->state == MTK_JPEG_INIT) {
> > + struct vb2_queue *dst_vq;
> > +
> > + dst_vq = v4l2_m2m_get_vq
> > + (ctx->fh.m2m_ctx,
> > + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
> > + mtk_jpeg_queue_src_chg_event(ctx);
> > + mtk_jpeg_set_queue_data(ctx, param);
> > + ctx->state = vb2_is_streaming(dst_vq) ?
> > + MTK_JPEG_SOURCE_CHANGE :
> > + MTK_JPEG_RUNNING;
> > + }
> > }
> > end:
> > v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, to_vb2_v4l2_buffer(vb));
> > @@ -738,16 +1074,16 @@ static void mtk_jpeg_stop_streaming(struct vb2_queue *q)
> > * subsampling. Update capture queue when the stream is off.
> > */
> > if (ctx->state == MTK_JPEG_SOURCE_CHANGE &&
> > - !V4L2_TYPE_IS_OUTPUT(q->type)) {
> > + !V4L2_TYPE_IS_OUTPUT(q->type) &&
> > + ctx->jpeg->mode == MTK_JPEG_DEC) {
> > struct mtk_jpeg_src_buf *src_buf;
> >
> > vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
> > src_buf = mtk_jpeg_vb2_to_srcbuf(&vb->vb2_buf);
> > mtk_jpeg_set_queue_data(ctx, &src_buf->dec_param);
> > ctx->state = MTK_JPEG_RUNNING;
> > - } else if (V4L2_TYPE_IS_OUTPUT(q->type)) {
> > + } else if (V4L2_TYPE_IS_OUTPUT(q->type))
> > ctx->state = MTK_JPEG_INIT;
> > - }
> >
> > while ((vb = mtk_jpeg_buf_remove(ctx, q->type)))
> > v4l2_m2m_buf_done(vb, VB2_BUF_STATE_ERROR);
> > @@ -802,6 +1138,34 @@ static int mtk_jpeg_set_dec_dst(struct mtk_jpeg_ctx *ctx,
> > return 0;
> > }
> >
> > +static void mtk_jpeg_set_enc_dst(struct mtk_jpeg_ctx *ctx,
> > + struct vb2_buffer *dst_buf,
> > + struct mtk_jpeg_enc_bs *bs)
> > +{
> > + struct jpeg_enc_param *p = &ctx->jpeg_param;
> > +
> > + bs->dma_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0) &
> > + (~JPEG_ENC_DST_ADDR_OFFSET_MASK);
>
> Wouldn't the hardware attempt to access the memory before the buffer in
> this case? This is a recipe for a disaster (e.g. the hardware overwriting
> some memory it shouldn't touch).
have deleted this
>
> Could we instead check the buffer address alignment in .buf_prepare and fail if
> it's not big enough?
>
> > + bs->dma_addr_offset = p->enable_exif ? MTK_JPEG_DEFAULT_EXIF_SIZE : 0;
> > + bs->dma_addr_offsetmask = bs->dma_addr & JPEG_ENC_DST_ADDR_OFFSET_MASK;
>
> What is the meaning of this offset mask?
our actual destination address = destination address + offset address+
destination address offset mask.The mask 0:No offset,1~15:offset byte
from the 16-byte aligned
>
> > + bs->size = mtk_jpeg_align(vb2_plane_size(dst_buf, 0), 128);
>
> Wouldn't this let the hardware write beyond the buffer if the original size
> was not a multiple of 128? Shouldn't we round_down() insted?
done
>
> > +}
> > +
> > +static void mtk_jpeg_set_enc_src(struct mtk_jpeg_ctx *ctx,
> > + struct vb2_buffer *src_buf,
> > + struct mtk_jpeg_enc_fb *fb)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < src_buf->num_planes; i++) {
> > + fb->fb_addr[i].dma_addr =
> > + vb2_dma_contig_plane_dma_addr(src_buf, i) +
> > + src_buf->planes[i].data_offset;
> > + fb->fb_addr[i].size = (size_t)src_buf->planes[i].length -
>
> The proper way to access plane length is to call vb2_plane_size().
done
>
> > + src_buf->planes[i].data_offset;
> > + }
> > +}
> > +
> > static void mtk_jpeg_device_run(void *priv)
> > {
> > struct mtk_jpeg_ctx *ctx = priv;
> > @@ -812,6 +1176,8 @@ static void mtk_jpeg_device_run(void *priv)
> > struct mtk_jpeg_src_buf *jpeg_src_buf;
> > struct mtk_jpeg_bs bs;
> > struct mtk_jpeg_fb fb;
> > + struct mtk_jpeg_enc_bs enc_bs;
> > + struct mtk_jpeg_enc_fb enc_fb;
> > int i;
> >
> > src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
> > @@ -822,30 +1188,45 @@ static void mtk_jpeg_device_run(void *priv)
> > for (i = 0; i < dst_buf->vb2_buf.num_planes; i++)
> > vb2_set_plane_payload(&dst_buf->vb2_buf, i, 0);
> > buf_state = VB2_BUF_STATE_DONE;
> > - goto dec_end;
> > + goto device_run_end;
> > }
> >
> > - if (mtk_jpeg_check_resolution_change(ctx, &jpeg_src_buf->dec_param)) {
> > - mtk_jpeg_queue_src_chg_event(ctx);
> > - ctx->state = MTK_JPEG_SOURCE_CHANGE;
> > - v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
> > - return;
> > - }
> > + if (jpeg->mode == MTK_JPEG_ENC) {
> > + mtk_jpeg_set_enc_dst(ctx, &dst_buf->vb2_buf, &enc_bs);
> > + mtk_jpeg_set_enc_src(ctx, &src_buf->vb2_buf, &enc_fb);
> > +
> > + spin_lock_irqsave(&jpeg->hw_lock, flags);
>
> Do we actually need this lock? device_run can be only called once and only
> after the hardware finished processing the current job.
canceled this
>
> > + mtk_jpeg_enc_reset(jpeg->reg_base);
> > + mtk_jpeg_enc_set_config(jpeg->reg_base,
> > + &jpeg_src_buf->enc_param, &enc_bs,
> > + &enc_fb);
> > +
> > + mtk_jpeg_enc_start(jpeg->reg_base);
> > + } else {
> > + if (mtk_jpeg_check_resolution_change
> > + (ctx, &jpeg_src_buf->dec_param)) {
> > + mtk_jpeg_queue_src_chg_event(ctx);
> > + ctx->state = MTK_JPEG_SOURCE_CHANGE;
> > + v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
> > + return;
> > + }
> >
> > - mtk_jpeg_set_dec_src(ctx, &src_buf->vb2_buf, &bs);
> > - if (mtk_jpeg_set_dec_dst(ctx, &jpeg_src_buf->dec_param, &dst_buf->vb2_buf, &fb))
> > - goto dec_end;
> > + mtk_jpeg_set_dec_src(ctx, &src_buf->vb2_buf, &bs);
> > + if (mtk_jpeg_set_dec_dst(ctx, &jpeg_src_buf->dec_param,
> > + &dst_buf->vb2_buf, &fb))
> > + goto device_run_end;
> >
> > - spin_lock_irqsave(&jpeg->hw_lock, flags);
> > - mtk_jpeg_dec_reset(jpeg->dec_reg_base);
> > - mtk_jpeg_dec_set_config(jpeg->dec_reg_base,
> > - &jpeg_src_buf->dec_param, &bs, &fb);
> > + spin_lock_irqsave(&jpeg->hw_lock, flags);
> > + mtk_jpeg_dec_reset(jpeg->reg_base);
> > + mtk_jpeg_dec_set_config(jpeg->reg_base,
> > + &jpeg_src_buf->dec_param, &bs, &fb);
> >
> > - mtk_jpeg_dec_start(jpeg->dec_reg_base);
> > + mtk_jpeg_dec_start(jpeg->reg_base);
> > + }
> > spin_unlock_irqrestore(&jpeg->hw_lock, flags);
>
> It is a good practice for spin_lock and spin_unlock to be in the same
> scope, for readability reasons.
>
> > return;
> >
> > -dec_end:
> > +device_run_end:
> > v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> > v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> > v4l2_m2m_buf_done(src_buf, buf_state);
> > @@ -905,30 +1286,30 @@ static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg)
> > ret = mtk_smi_larb_get(jpeg->larb);
> > if (ret)
> > dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret);
> > - clk_prepare_enable(jpeg->clk_jdec_smi);
> > - clk_prepare_enable(jpeg->clk_jdec);
> > + if (jpeg->mode == MTK_JPEG_DEC)
> > + clk_prepare_enable(jpeg->clk_jpeg_smi);
> > + clk_prepare_enable(jpeg->clk_jpeg);
> > }
> >
> > static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg)
> > {
> > - clk_disable_unprepare(jpeg->clk_jdec);
> > - clk_disable_unprepare(jpeg->clk_jdec_smi);
> > + clk_disable_unprepare(jpeg->clk_jpeg);
> > + if (jpeg->mode == MTK_JPEG_DEC)
> > + clk_disable_unprepare(jpeg->clk_jpeg_smi);
> > mtk_smi_larb_put(jpeg->larb);
> > }
> >
> > -static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
> > +static irqreturn_t mtk_jpeg_irq(int irq, void *priv)
> > {
> > struct mtk_jpeg_dev *jpeg = priv;
> > struct mtk_jpeg_ctx *ctx;
> > struct vb2_v4l2_buffer *src_buf, *dst_buf;
> > struct mtk_jpeg_src_buf *jpeg_src_buf;
> > enum vb2_buffer_state buf_state = VB2_BUF_STATE_ERROR;
> > - u32 dec_irq_ret;
> > - u32 dec_ret;
> > + u32 irq_ret;
>
> In the kernel coding style, type is separated from variable name with a
> single space.
done
>
> > + u32 ret, result_size;
> > int i;
> >
> > - dec_ret = mtk_jpeg_dec_get_int_status(jpeg->dec_reg_base);
> > - dec_irq_ret = mtk_jpeg_dec_enum_result(dec_ret);
> > ctx = v4l2_m2m_get_curr_priv(jpeg->m2m_dev);
> > if (!ctx) {
> > v4l2_err(&jpeg->v4l2_dev, "Context is NULL\n");
> > @@ -939,39 +1320,107 @@ static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
> > dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> > jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(&src_buf->vb2_buf);
> >
> > - if (dec_irq_ret >= MTK_JPEG_DEC_RESULT_UNDERFLOW)
> > - mtk_jpeg_dec_reset(jpeg->dec_reg_base);
> > + if (jpeg->mode == MTK_JPEG_ENC) {
> > + ret = mtk_jpeg_enc_get_int_status(jpeg->reg_base);
> > + irq_ret = mtk_jpeg_enc_enum_result(jpeg->reg_base, ret,
> > + &result_size);
> >
> > - if (dec_irq_ret != MTK_JPEG_DEC_RESULT_EOF_DONE) {
> > - dev_err(jpeg->dev, "decode failed\n");
> > - goto dec_end;
> > - }
> > + if (irq_ret >= MTK_JPEG_ENC_RESULT_STALL)
> > + mtk_jpeg_enc_reset(jpeg->reg_base);
> > +
> > + if (irq_ret != MTK_JPEG_ENC_RESULT_DONE) {
> > + dev_err(jpeg->dev, "encode failed\n");
> > + goto irq_end;
> > + }
> > +
> > + vb2_set_plane_payload(&dst_buf->vb2_buf, 0,
> > + result_size);
> > + } else {
> > + ret = mtk_jpeg_dec_get_int_status(jpeg->reg_base);
> > + irq_ret = mtk_jpeg_dec_enum_result(ret);
> >
> > - for (i = 0; i < dst_buf->vb2_buf.num_planes; i++)
> > - vb2_set_plane_payload(&dst_buf->vb2_buf, i,
> > - jpeg_src_buf->dec_param.comp_size[i]);
> > + if (irq_ret >= MTK_JPEG_DEC_RESULT_UNDERFLOW)
> > + mtk_jpeg_dec_reset(jpeg->reg_base);
> > +
> > + if (irq_ret != MTK_JPEG_DEC_RESULT_EOF_DONE) {
> > + dev_err(jpeg->dev, "decode failed\n");
> > + goto irq_end;
> > + }
> > +
> > + for (i = 0; i < dst_buf->vb2_buf.num_planes; i++)
> > + vb2_set_plane_payload
> > + (&dst_buf->vb2_buf, i,
> > + jpeg_src_buf->dec_param.comp_size[i]);
> > + }
> >
> > buf_state = VB2_BUF_STATE_DONE;
> >
> > -dec_end:
> > +irq_end:
> > v4l2_m2m_buf_done(src_buf, buf_state);
> > v4l2_m2m_buf_done(dst_buf, buf_state);
> > v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
> > return IRQ_HANDLED;
> > }
> >
> > -static void mtk_jpeg_set_default_params(struct mtk_jpeg_ctx *ctx)
> > +static void mtk_jpeg_set_enc_default_params(struct mtk_jpeg_ctx *ctx)
> > +{
> > + struct mtk_jpeg_q_data *q = &ctx->out_q;
> > + int align_w, align_h;
> > +
> > + ctx->fh.ctrl_handler = &ctx->ctrl_hdl;
> > +
> > + ctx->colorspace = V4L2_COLORSPACE_JPEG,
> > + ctx->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> > + ctx->quantization = V4L2_QUANTIZATION_DEFAULT;
> > + ctx->xfer_func = V4L2_XFER_FUNC_DEFAULT;
> > +
> > + q->w = MTK_JPEG_MIN_WIDTH;
> > + q->h = MTK_JPEG_MIN_HEIGHT;
> > +
> > + q->fmt = mtk_jpeg_find_format(ctx, V4L2_PIX_FMT_YUYV,
> > + MTK_JPEG_FMT_TYPE_OUTPUT);
> > +
> > + align_w = q->w;
> > + align_h = q->h;
> > + align_w = round_up(align_w, 2);
> > + v4l_bound_align_image(&align_w, MTK_JPEG_MIN_WIDTH, MTK_JPEG_MAX_WIDTH,
> > + 5, &align_h, MTK_JPEG_MIN_HEIGHT,
> > + MTK_JPEG_MAX_HEIGHT, 3, 0);
> > + align_w = align_w << 1;
> > +
> > + if (align_w < MTK_JPEG_MIN_WIDTH &&
> > + (align_w + 32) <= MTK_JPEG_MAX_WIDTH)
> > + align_w += 32;
> > + if (align_h < MTK_JPEG_MIN_HEIGHT &&
> > + (align_h + 8) <= MTK_JPEG_MAX_HEIGHT)
> > + align_h += 8;
> > +
> > + q->sizeimage[0] = align_w * align_h;
> > + q->bytesperline[0] = align_w;
> > +
> > + q = &ctx->cap_q;
> > + q->w = MTK_JPEG_MIN_WIDTH;
> > + q->h = MTK_JPEG_MIN_HEIGHT;
> > + q->fmt = mtk_jpeg_find_format(ctx, V4L2_PIX_FMT_JPEG,
> > + MTK_JPEG_FMT_TYPE_CAPTURE);
> > + q->bytesperline[0] = 0;
> > + q->sizeimage[0] = MTK_JPEG_DEFAULT_SIZEIMAGE;
> > +}
>
> Could we just create an arbitrary v4l2_pix_format_mplane struct and call
> s_fmt instead? In general, all of the constant values and alignments should
> be already ensured by try_fmt, so this function should be redundant.
if cancel this function,the v4l2-compliance test will fail
>
> > +
> > +static void mtk_jpeg_set_dec_default_params(struct mtk_jpeg_ctx *ctx)
> > {
> > struct mtk_jpeg_q_data *q = &ctx->out_q;
> > int i;
> >
> > + ctx->fh.ctrl_handler = &ctx->ctrl_hdl;
> > +
> > ctx->colorspace = V4L2_COLORSPACE_JPEG,
> > ctx->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> > ctx->quantization = V4L2_QUANTIZATION_DEFAULT;
> > ctx->xfer_func = V4L2_XFER_FUNC_DEFAULT;
> >
> > q->fmt = mtk_jpeg_find_format(ctx, V4L2_PIX_FMT_JPEG,
> > - MTK_JPEG_FMT_TYPE_OUTPUT);
> > + MTK_JPEG_FMT_TYPE_OUTPUT);
> > q->w = MTK_JPEG_MIN_WIDTH;
> > q->h = MTK_JPEG_MIN_HEIGHT;
> > q->bytesperline[0] = 0;
> > @@ -979,7 +1428,7 @@ static void mtk_jpeg_set_default_params(struct mtk_jpeg_ctx *ctx)
> >
> > q = &ctx->cap_q;
> > q->fmt = mtk_jpeg_find_format(ctx, V4L2_PIX_FMT_YUV420M,
> > - MTK_JPEG_FMT_TYPE_CAPTURE);
> > + MTK_JPEG_FMT_TYPE_CAPTURE);
> > q->w = MTK_JPEG_MIN_WIDTH;
> > q->h = MTK_JPEG_MIN_HEIGHT;
> >
> > @@ -1020,7 +1469,15 @@ static int mtk_jpeg_open(struct file *file)
> > goto error;
> > }
> >
> > - mtk_jpeg_set_default_params(ctx);
> > + ret = mtk_jpeg_ctrls_setup(ctx);
> > + if (ret) {
> > + v4l2_err(&jpeg->v4l2_dev, "Failed to setup controls() (%d)\n",
> > + ret);
> > + goto error;
> > + }
> > +
> > + jpeg->mode == MTK_JPEG_ENC ? mtk_jpeg_set_enc_default_params(ctx) :
> > + mtk_jpeg_set_dec_default_params(ctx);
>
> As mentioned before, this kind of usage of the ternary operator is generaly
> discouraged, because it makes the code difficult to read.
done
>
> > mutex_unlock(&jpeg->lock);
> > return 0;
> >
> > @@ -1040,6 +1497,7 @@ static int mtk_jpeg_release(struct file *file)
> >
> > mutex_lock(&jpeg->lock);
> > v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
> > + v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
> > v4l2_fh_del(&ctx->fh);
> > v4l2_fh_exit(&ctx->fh);
> > kfree(ctx);
> > @@ -1064,6 +1522,7 @@ static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
> > node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0);
> > if (!node)
> > return -EINVAL;
> > +
>
> Unnecessary change?
yes
>
> > pdev = of_find_device_by_node(node);
> > if (WARN_ON(!pdev)) {
> > of_node_put(node);
> > @@ -1073,19 +1532,24 @@ static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
> >
> > jpeg->larb = &pdev->dev;
> >
> > - jpeg->clk_jdec = devm_clk_get(jpeg->dev, "jpgdec");
> > - if (IS_ERR(jpeg->clk_jdec))
> > - return PTR_ERR(jpeg->clk_jdec);
> > + if (jpeg->mode == MTK_JPEG_ENC) {
> > + jpeg->clk_jpeg = devm_clk_get(jpeg->dev, "jpgenc");
> > + return PTR_ERR_OR_ZERO(jpeg->clk_jpeg);
> > + }
> > +
> > + jpeg->clk_jpeg = devm_clk_get(jpeg->dev, "jpgdec");
> > + if (IS_ERR(jpeg->clk_jpeg))
> > + return PTR_ERR(jpeg->clk_jpeg);
> >
> > - jpeg->clk_jdec_smi = devm_clk_get(jpeg->dev, "jpgdec-smi");
> > - return PTR_ERR_OR_ZERO(jpeg->clk_jdec_smi);
> > + jpeg->clk_jpeg_smi = devm_clk_get(jpeg->dev, "jpgdec-smi");
> > + return PTR_ERR_OR_ZERO(jpeg->clk_jpeg_smi);
> > }
> >
> > static int mtk_jpeg_probe(struct platform_device *pdev)
> > {
> > struct mtk_jpeg_dev *jpeg;
> > struct resource *res;
> > - int dec_irq;
> > + int jpeg_irq;
> > int ret;
> >
> > jpeg = devm_kzalloc(&pdev->dev, sizeof(*jpeg), GFP_KERNEL);
> > @@ -1095,28 +1559,26 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
> > mutex_init(&jpeg->lock);
> > spin_lock_init(&jpeg->hw_lock);
> > jpeg->dev = &pdev->dev;
> > + jpeg->mode = (enum mtk_jpeg_mode)of_device_get_match_data(jpeg->dev);
> >
> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > - jpeg->dec_reg_base = devm_ioremap_resource(&pdev->dev, res);
> > - if (IS_ERR(jpeg->dec_reg_base)) {
> > - ret = PTR_ERR(jpeg->dec_reg_base);
> > + jpeg->reg_base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(jpeg->reg_base)) {
> > + ret = PTR_ERR(jpeg->reg_base);
> > return ret;
> > }
> >
> > - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> > - dec_irq = platform_get_irq(pdev, 0);
> > - if (!res || dec_irq < 0) {
> > - dev_err(&pdev->dev, "Failed to get dec_irq %d.\n", dec_irq);
> > - ret = -EINVAL;
> > - return ret;
> > + jpeg_irq = platform_get_irq(pdev, 0);
> > + if (jpeg_irq < 0) {
> > + dev_err(&pdev->dev, "Failed to get jpeg_irq %d.\n", jpeg_irq);
> > + return jpeg_irq;
> > }
> >
> > - ret = devm_request_irq(&pdev->dev, dec_irq, mtk_jpeg_dec_irq, 0,
> > + ret = devm_request_irq(&pdev->dev, jpeg_irq, mtk_jpeg_irq, 0,
> > pdev->name, jpeg);
> > if (ret) {
> > - dev_err(&pdev->dev, "Failed to request dec_irq %d (%d)\n",
> > - dec_irq, ret);
> > - ret = -EINVAL;
>
> This removal of ret assignment looks like a separate fix that should be
> done in its own patch.
this change is because of the adding of jpeg enc driver,not the orignal
driver' question, should I move it to the orignal driver's patch?
>
> > + dev_err(&pdev->dev, "Failed to request jpeg_irq %d (%d)\n",
> > + jpeg_irq, ret);
> > goto err_req_irq;
> > }
> >
> > @@ -1140,33 +1602,35 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
> > goto err_m2m_init;
> > }
> >
> > - jpeg->dec_vdev = video_device_alloc();
> > - if (!jpeg->dec_vdev) {
> > + jpeg->vfd_jpeg = video_device_alloc();
> > + if (!jpeg->vfd_jpeg) {
> > ret = -ENOMEM;
> > - goto err_dec_vdev_alloc;
> > + goto err_vfd_jpeg_alloc;
> > }
> > - snprintf(jpeg->dec_vdev->name, sizeof(jpeg->dec_vdev->name),
> > - "%s-dec", MTK_JPEG_NAME);
> > - jpeg->dec_vdev->fops = &mtk_jpeg_fops;
> > - jpeg->dec_vdev->ioctl_ops = &mtk_jpeg_ioctl_ops;
> > - jpeg->dec_vdev->minor = -1;
> > - jpeg->dec_vdev->release = video_device_release;
> > - jpeg->dec_vdev->lock = &jpeg->lock;
> > - jpeg->dec_vdev->v4l2_dev = &jpeg->v4l2_dev;
> > - jpeg->dec_vdev->vfl_dir = VFL_DIR_M2M;
> > - jpeg->dec_vdev->device_caps = V4L2_CAP_STREAMING |
> > + snprintf(jpeg->vfd_jpeg->name, sizeof(jpeg->vfd_jpeg->name),
> > + "%s-%s", MTK_JPEG_NAME,
> > + jpeg->mode == MTK_JPEG_ENC ? "enc" : "dec");
> > + jpeg->vfd_jpeg->fops = &mtk_jpeg_fops;
> > + jpeg->vfd_jpeg->ioctl_ops = &mtk_jpeg_ioctl_ops;
> > + jpeg->vfd_jpeg->minor = -1;
> > + jpeg->vfd_jpeg->release = video_device_release;
> > + jpeg->vfd_jpeg->lock = &jpeg->lock;
> > + jpeg->vfd_jpeg->v4l2_dev = &jpeg->v4l2_dev;
> > + jpeg->vfd_jpeg->vfl_dir = VFL_DIR_M2M;
> > + jpeg->vfd_jpeg->device_caps = V4L2_CAP_STREAMING |
> > V4L2_CAP_VIDEO_M2M_MPLANE;
> >
> > - ret = video_register_device(jpeg->dec_vdev, VFL_TYPE_GRABBER, 3);
> > + ret = video_register_device(jpeg->vfd_jpeg, VFL_TYPE_GRABBER, -1);
>
> The change from 3 to -1 also looks like something for a separate patch.
same as the above reply
>
> > if (ret) {
> > v4l2_err(&jpeg->v4l2_dev, "Failed to register video device\n");
> > - goto err_dec_vdev_register;
> > + goto err_vfd_jpeg_register;
> > }
> >
> > - video_set_drvdata(jpeg->dec_vdev, jpeg);
> > + video_set_drvdata(jpeg->vfd_jpeg, jpeg);
> > v4l2_info(&jpeg->v4l2_dev,
> > - "decoder device registered as /dev/video%d (%d,%d)\n",
> > - jpeg->dec_vdev->num, VIDEO_MAJOR, jpeg->dec_vdev->minor);
> > + "jpeg device %d registered as /dev/video%d (%d,%d)\n",
> > + jpeg->mode, jpeg->vfd_jpeg->num, VIDEO_MAJOR,
> > + jpeg->vfd_jpeg->minor);
> >
> > platform_set_drvdata(pdev, jpeg);
> >
> > @@ -1174,10 +1638,10 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
> >
> > return 0;
> >
> > -err_dec_vdev_register:
> > - video_device_release(jpeg->dec_vdev);
> > +err_vfd_jpeg_register:
> > + video_device_release(jpeg->vfd_jpeg);
> >
> > -err_dec_vdev_alloc:
> > +err_vfd_jpeg_alloc:
> > v4l2_m2m_release(jpeg->m2m_dev);
> >
> > err_m2m_init:
> > @@ -1197,8 +1661,8 @@ static int mtk_jpeg_remove(struct platform_device *pdev)
> > struct mtk_jpeg_dev *jpeg = platform_get_drvdata(pdev);
> >
> > pm_runtime_disable(&pdev->dev);
> > - video_unregister_device(jpeg->dec_vdev);
> > - video_device_release(jpeg->dec_vdev);
> > + video_unregister_device(jpeg->vfd_jpeg);
> > + video_device_release(jpeg->vfd_jpeg);
> > v4l2_m2m_release(jpeg->m2m_dev);
> > v4l2_device_unregister(&jpeg->v4l2_dev);
> >
> > @@ -1209,7 +1673,11 @@ static __maybe_unused int mtk_jpeg_pm_suspend(struct device *dev)
> > {
> > struct mtk_jpeg_dev *jpeg = dev_get_drvdata(dev);
> >
> > - mtk_jpeg_dec_reset(jpeg->dec_reg_base);
> > + if (jpeg->mode == MTK_JPEG_ENC)
> > + mtk_jpeg_enc_reset(jpeg->reg_base);
> > + else
> > + mtk_jpeg_dec_reset(jpeg->reg_base);
> > +
> > mtk_jpeg_clk_off(jpeg);
> >
> > return 0;
> > @@ -1220,7 +1688,10 @@ static __maybe_unused int mtk_jpeg_pm_resume(struct device *dev)
> > struct mtk_jpeg_dev *jpeg = dev_get_drvdata(dev);
> >
> > mtk_jpeg_clk_on(jpeg);
> > - mtk_jpeg_dec_reset(jpeg->dec_reg_base);
> > + if (jpeg->mode == MTK_JPEG_ENC)
> > + mtk_jpeg_enc_reset(jpeg->reg_base);
> > + else
> > + mtk_jpeg_dec_reset(jpeg->reg_base);
> >
> > return 0;
> > }
> > @@ -1256,11 +1727,15 @@ static const struct dev_pm_ops mtk_jpeg_pm_ops = {
> > static const struct of_device_id mtk_jpeg_match[] = {
> > {
> > .compatible = "mediatek,mt8173-jpgdec",
> > - .data = NULL,
> > + .data = (void *)MTK_JPEG_DEC,
> > },
> > {
> > .compatible = "mediatek,mt2701-jpgdec",
> > - .data = NULL,
> > + .data = (void *)MTK_JPEG_DEC,
> > + },
> > + {
> > + .compatible = "mediatek,mtk-jpgenc",
> > + .data = (void *)MTK_JPEG_ENC,
> > },
> > {},
> > };
> > diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> > index 999bd1427809..35ddc64af554 100644
> > --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> > +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> > @@ -3,6 +3,7 @@
> > * Copyright (c) 2016 MediaTek Inc.
> > * Author: Ming Hsiu Tsai <minghsiu.tsai@xxxxxxxxxxxx>
> > * Rick Chang <rick.chang@xxxxxxxxxxxx>
> > + * Xia Jiang <xia.jiang@xxxxxxxxxxxx>
> > */
> >
> > #ifndef _MTK_JPEG_CORE_H
> > @@ -17,23 +18,77 @@
> >
> > #define MTK_JPEG_FMT_FLAG_DEC_OUTPUT BIT(0)
> > #define MTK_JPEG_FMT_FLAG_DEC_CAPTURE BIT(1)
> > +#define MTK_JPEG_FMT_FLAG_ENC_OUTPUT BIT(2)
> > +#define MTK_JPEG_FMT_FLAG_ENC_CAPTURE BIT(3)
> >
> > #define MTK_JPEG_FMT_TYPE_OUTPUT 1
> > #define MTK_JPEG_FMT_TYPE_CAPTURE 2
> >
> > -#define MTK_JPEG_MIN_WIDTH 32
> > -#define MTK_JPEG_MIN_HEIGHT 32
> > -#define MTK_JPEG_MAX_WIDTH 8192
> > -#define MTK_JPEG_MAX_HEIGHT 8192
> > +#define MTK_JPEG_MIN_WIDTH 32U
> > +#define MTK_JPEG_MIN_HEIGHT 32U
> > +#define MTK_JPEG_MAX_WIDTH 65535U
> > +#define MTK_JPEG_MAX_HEIGHT 65535U
>
> Why is it okay to change this from 8192 to 65535?
our hw support max width/height to 65535
>
> >
> > #define MTK_JPEG_DEFAULT_SIZEIMAGE (1 * 1024 * 1024)
> > +#define MTK_JPEG_DEFAULT_EXIF_SIZE (64 * 1024)
> >
> > +#define MTK_JPEG_ENCODE 0
> > +#define MTK_JPEG_DECODE 1
>
> These two are unused.
deleted it
>
> > +
> > +/**
> > + * enum mtk_jpeg_ctx_state - contex state of jpeg
> > + */
> > enum mtk_jpeg_ctx_state {
> > MTK_JPEG_INIT = 0,
> > MTK_JPEG_RUNNING,
> > MTK_JPEG_SOURCE_CHANGE,
> > };
> >
> > +/**
> > + * enum mtk_jpeg_mode - mode of jpeg
> > + */
> > +enum mtk_jpeg_mode {
> > + MTK_JPEG_ENC,
> > + MTK_JPEG_DEC,
> > +};
>
> Perhaps we could just have a bool is_encoder?
>
> > +
> > +/**
> > + * enum jpeg_enc_yuv_fmt - yuv format of jpeg enc
> > + */
> > +enum jpeg_enc_yuv_fmt {
> > + JPEG_YUV_FORMAT_YUYV = 0,
> > + JPEG_YUV_FORMAT_YVYU = 1,
> > + JPEG_YUV_FORMAT_NV12 = 2,
> > + JEPG_YUV_FORMAT_NV21 = 3,
> > +};
>
> #define macros are typically used for hardware values.
done
>
> > +
> > +/**
> > + * enum JPEG_ENCODE_QUALITY_ENUM - number of jpeg encoder quality
> > + */
> > +enum JPEG_ENCODE_QUALITY_ENUM {
> > + JPEG_ENCODE_QUALITY_Q60 = 0x0,
> > + JPEG_ENCODE_QUALITY_Q80 = 0x1,
> > + JPEG_ENCODE_QUALITY_Q90 = 0x2,
> > + JPEG_ENCODE_QUALITY_Q95 = 0x3,
> > +
> > + JPEG_ENCODE_QUALITY_Q39 = 0x4,
> > + JPEG_ENCODE_QUALITY_Q68 = 0x5,
> > + JPEG_ENCODE_QUALITY_Q84 = 0x6,
> > + JPEG_ENCODE_QUALITY_Q92 = 0x7,
> > +
> > + JPEG_ENCODE_QUALITY_Q48 = 0x8,
>
> No enum for 0x9?
yes, these values are defined according by hw
>
> > + JPEG_ENCODE_QUALITY_Q74 = 0xA,
> > + JPEG_ENCODE_QUALITY_Q87 = 0xB,
> > +
> > + JPEG_ENCODE_QUALITY_Q34 = 0xC,
>
> No enum for 0xd?
yes
>
> > + JPEG_ENCODE_QUALITY_Q64 = 0xE,
> > + JPEG_ENCODE_QUALITY_Q82 = 0xF,
> > +
> > + JPEG_ENCODE_QUALITY_Q97 = 0x10,
> > +
> > + JPEG_ENCODE_QUALITY_ALL = 0xFFFFFFFF
>
> What is the meaning of this value?
means the quantization table setting for frame
>
> > +};
>
> Since these are hardware register values, #define macros are preferred.
done
>
> > +
> > /**
> > * struct mt_jpeg - JPEG IP abstraction
> > * @lock: the mutex protecting this structure
> > @@ -43,11 +98,12 @@ enum mtk_jpeg_ctx_state {
> > * @v4l2_dev: v4l2 device for mem2mem mode
> > * @m2m_dev: v4l2 mem2mem device data
> > * @alloc_ctx: videobuf2 memory allocator's context
> > - * @dec_vdev: video device node for decoder mem2mem mode
> > - * @dec_reg_base: JPEG registers mapping
> > - * @clk_jdec: JPEG hw working clock
> > - * @clk_jdec_smi: JPEG SMI bus clock
> > + * @vfd_jpeg: video device node for jpeg mem2mem mode
> > + * @reg_base: JPEG registers mapping
> > + * @clk_jpeg: JPEG hw working clock
> > + * @clk_jpeg_smi: JPEG SMI bus clock
> > * @larb: SMI device
> > + * @mode: compression (encode) operation or decompression (decode)
> > */
> > struct mtk_jpeg_dev {
> > struct mutex lock;
> > @@ -57,11 +113,12 @@ struct mtk_jpeg_dev {
> > struct v4l2_device v4l2_dev;
> > struct v4l2_m2m_dev *m2m_dev;
> > void *alloc_ctx;
> > - struct video_device *dec_vdev;
> > - void __iomem *dec_reg_base;
> > - struct clk *clk_jdec;
> > - struct clk *clk_jdec_smi;
> > + struct video_device *vfd_jpeg;
> > + void __iomem *reg_base;
> > + struct clk *clk_jpeg;
> > + struct clk *clk_jpeg_smi;
> > struct device *larb;
> > + enum mtk_jpeg_mode mode;
> > };
> >
> > /**
> > @@ -101,15 +158,51 @@ struct mtk_jpeg_q_data {
> > u32 sizeimage[VIDEO_MAX_PLANES];
> > };
> >
> > +/**
> > + * jpeg_enc_param - parameters of jpeg encode control
> > + * @enable_exif: EXIF enable for jpeg encode mode
> > + * @enc_quality: destination image quality in encode mode
> > + * @restart_interval: JPEG restart interval for JPEG encoding
> > + */
> > +struct jpeg_enc_param {
> > + u32 enable_exif;
>
> Shouldn't this be a bool?
this value is seted by V4L2_CID_JPEG_ACTIVE_MARKER control,its' value is
V4L2_JPEG_ACTIVE_MARKER_APP1(1<<1),not a bool
>
> > + u32 enc_quality;
>
> This is from 0 to 100, so perhaps unsigned char?
yes,has modified it to u8
>
> > + u32 restart_interval;
>
> Ditto.
done
>
> > +};
> > +
> > +/**
> > + * mtk_jpeg_enc_param: General jpeg encoding parameters
> > + * @enc_w: image width
> > + * @enc_h: image height
> > + * @enable_exif: EXIF enable for jpeg encode mode
> > + * @enc_quality: destination image quality in encode mode
> > + * @enc_format: input image format
> > + * @restart_interval: JPEG restart interval for JPEG encoding
> > + * @img_stride: jpeg encoder image stride
> > + * @mem_stride: jpeg encoder memory stride
> > + * @total_encdu: total 8x8 block number
> > + */
> > +struct mtk_jpeg_enc_param {
> > + u32 enc_w;
> > + u32 enc_h;
> > + u32 enable_exif;
> > + u32 enc_quality;
> > + u32 enc_format;
> > + u32 restart_interval;
> > + u32 img_stride;
> > + u32 mem_stride;
> > + u32 total_encdu;
> > +};
>
> All of the parameters here are already represented by corresponding generic
> V4L2 state. We should be able to just convert them to the hardware
> representation at the time of programing the registers, without a need to
> store them in this intermediate struct.
deleted this structure
>
> > +
> > /**
> > * mtk_jpeg_ctx - the device context data
> > * @jpeg: JPEG IP device for this context
> > * @out_q: source (output) queue information
> > * @cap_q: destination (capture) queue queue information
> > * @fh: V4L2 file handle
> > - * @dec_param parameters for HW decoding
> > * @state: state of the context
> > - * @header_valid: set if header has been parsed and valid
>
> Why removing these two?
the orignal structure didn't have these two member variables
>
> > + * @jpeg_param: jpeg encode parameters
> > + * @ctrl_hdl: controls handler
> > * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
> > * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding
> > * @quantization: enum v4l2_quantization, colorspace quantization
> > @@ -121,6 +214,8 @@ struct mtk_jpeg_ctx {
> > struct mtk_jpeg_q_data cap_q;
> > struct v4l2_fh fh;
> > enum mtk_jpeg_ctx_state state;
> > + struct jpeg_enc_param jpeg_param;
> > + struct v4l2_ctrl_handler ctrl_hdl;
> >
> > enum v4l2_colorspace colorspace;
> > enum v4l2_ycbcr_encoding ycbcr_enc;
> > diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_dec_hw.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_dec_hw.h
> > index a37be1a48415..39d743fb572f 100644
> > --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_dec_hw.h
> > +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_dec_hw.h
> > @@ -3,10 +3,11 @@
> > * Copyright (c) 2016 MediaTek Inc.
> > * Author: Ming Hsiu Tsai <minghsiu.tsai@xxxxxxxxxxxx>
> > * Rick Chang <rick.chang@xxxxxxxxxxxx>
> > + * Xia Jiang <xia.jiang@xxxxxxxxxxxx>
> > */
> >
> > -#ifndef _MTK_JPEG_HW_H
> > -#define _MTK_JPEG_HW_H
> > +#ifndef _MTK_JPEG_DEC_HW_H
> > +#define _MTK_JPEG_DEC_HW_H
> >
> > #include <media/videobuf2-core.h>
> >
> > @@ -80,4 +81,4 @@ void mtk_jpeg_dec_set_config(void __iomem *base,
> > void mtk_jpeg_dec_reset(void __iomem *dec_reg_base);
> > void mtk_jpeg_dec_start(void __iomem *dec_reg_base);
> >
> > -#endif /* _MTK_JPEG_HW_H */
> > +#endif /* _MTK_JPEG_DEC_HW_H */
> > diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_enc_hw.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_enc_hw.c
> > new file mode 100644
> > index 000000000000..ac27774ccfed
> > --- /dev/null
> > +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_enc_hw.c
> > @@ -0,0 +1,175 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (c) 2019 MediaTek Inc.
> > + * Author: Xia Jiang <xia.jiang@xxxxxxxxxxxx>
> > + *
> > + */
> > +
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <media/videobuf2-core.h>
> > +
> > +#include "mtk_jpeg_enc_hw.h"
> > +
> > +void mtk_jpeg_enc_reset(void __iomem *base)
> > +{
> > + writel(0x00, base + JPGENC_RSTB);
> > + writel(JPEG_ENC_RESET_BIT, base + JPGENC_RSTB);
> > + writel(0x00, base + JPGENC_CODEC_SEL);
> > +}
> > +
> > +u32 mtk_jpeg_enc_get_int_status(void __iomem *base)
> > +{
> > + u32 ret;
> > +
> > + ret = readl(base + JPGENC_INT_STS) &
> > + JPEG_DRV_ENC_INT_STATUS_MASK_ALLIRQ;
> > + if (ret)
> > + writel(0, base + JPGENC_INT_STS);
> > +
> > + return ret;
> > +}
> > +
> > +u32 mtk_jpeg_enc_get_file_size(void __iomem *base)
> > +{
> > + return readl(base + JPGENC_DMA_ADDR0) - readl(base + JPGENC_DST_ADDR0);
> > +}
>
> This is just used in the function below, so the code could just be moved
> there.
>
> > +
> > +u32 mtk_jpeg_enc_enum_result(void __iomem *base, u32 irq_status, u32 *file_size)
> > +{
> > + *file_size = mtk_jpeg_enc_get_file_size(base);
> > + if (irq_status & JPEG_DRV_ENC_INT_STATUS_DONE)
> > + return MTK_JPEG_ENC_RESULT_DONE;
> > + else if (irq_status & JPEG_DRV_ENC_INT_STATUS_STALL)
> > + return MTK_JPEG_ENC_RESULT_STALL;
> > + else if (irq_status & JPEG_DRV_ENC_INT_STATUS_VCODEC_IRQ)
> > + return MTK_JPEG_ENC_RESULT_VCODEC_IRQ;
> > + return MTK_JPEG_ENC_RESULT_ERROR_UNKNOWN;
>
> This function seems to do two things at a time, which is confusing, given
> that the name only refers to the result and doesn't mention the "file
> size".
>
> So an alternative option to my suggestion above would be removing the file
> size handling from this function and using the dedicated function for it.
done
>
> > +}
> > +
> > +static void mtk_jpeg_enc_set_blk_num(void __iomem *base, u32 blk_num)
> > +{
> > + writel(blk_num, base + JPGENC_BLK_NUM);
> > +}
>
> Is there any benefit of having a lot of such small functions rather than
> just doing everything needed in one function? This hardware doesn't have so
> many parameters to configure and the caller side is generic V4L2 and vb2,
> so there is no need for additional layer of abstraction.
>
> How about the following model, as used by many other drivers:
>
> mtk_jpeg_enc_set_src()
> {
> // Set any registers related to source format and buffer
> }
>
> mtk_jpeg_enc_set_dst()
> {
> // Set any registers related to destination format and buffer
> }
>
> mtk_jpeg_enc_set_params()
> {
> // Set any registers related to additional encoding parameters
> }
>
> mtk_jpeg_enc_device_run(enc, ctx)
> {
> mtk_jpeg_enc_set_src(enc, src_buf, src_fmt);
> mtk_jpeg_enc_set_dst(enc, dst_buf, dst_fmt);
> mtk_jpeg_enc_set_params(enc, ctx);
> // Trigger the hardware run
> }
done
>
> > +
> > +static void mtk_jpeg_enc_set_encFormat(void __iomem *base, u32 enc_format)
> > +{
> > + u32 value;
> > +
> > + value = readl(base + JPGENC_CTRL);
> > + value &= ~JPEG_ENC_CTRL_YUV_BIT;
> > + value |= JPGENC_FORMAT(enc_format);
> > + writel(value, base + JPGENC_CTRL);
>
> The model I suggested above also avoids this kind of read modify write
> operations, which just unnecessarily add synchronous MMIO round trips, which
> means more CPU overhead.
>
> Given that the full state is always known by the driver, it can just write
> all the register values without the need to read them back.
the JPGENC_CTRL register has 32 bits,different bits have different
meanings. encformat is bit 3~4,so we need ready before write to
guarantee other bits' value not be changed
>
> > +}
> > +
> > +static void mtk_jpeg_enc_set_img_size(void __iomem *base, u32 width, u32 height)
> > +{
> > + u32 value;
> > +
> > + value = JPGENC_WIDTH_HEIGHT(width, height);
> > + writel(value, base + JPGENC_IMG_SIZE);
> > +}
> > +
> > +static void mtk_jpeg_enc_set_src_img(void __iomem *base, u32 width,
> > + u32 height, u32 yuv_format,
> > + u32 total_encdu)
> > +{
> > + mtk_jpeg_enc_set_img_size(base, width, height);
> > + mtk_jpeg_enc_set_encFormat(base, yuv_format);
> > + mtk_jpeg_enc_set_blk_num(base, total_encdu);
> > +}
> > +
> > +static void mtk_jpeg_enc_set_src_buf(void __iomem *base, u32 img_stride,
> > + u32 mem_stride, u32 src_addr,
> > + u32 src_addr_c)
> > +{
> > + writel(img_stride, base + JPGENC_IMG_STRIDE);
> > + writel(mem_stride, base + JPGENC_STRIDE);
> > + writel(src_addr, base + JPGENC_SRC_LUMA_ADDR);
> > + writel(src_addr_c, base + JPGENC_SRC_CHROMA_ADDR);
> > +}
> > +
> > +static void mtk_jpeg_enc_set_dst_buf(void __iomem *base, u32 dst_addr,
> > + u32 stall_size, u32 init_offset,
> > + u32 offset_mask)
> > +{
> > + writel(JPGENC_INIT_OFFSET(init_offset), base + JPGENC_OFFSET_ADDR);
> > + writel(JPGENC_OFFSET_MASK(offset_mask), base + JPGENC_BYTE_OFFSET_MASK);
> > + writel(JPGENC_DST_ADDR(dst_addr), base + JPGENC_DST_ADDR0);
> > + writel(JPGENC_STALL_ADDR(dst_addr, stall_size),
> > + base + JPGENC_STALL_ADDR0);
> > +}
> > +
> > +static void mtk_jpeg_enc_set_quality(void __iomem *base, u32 quality)
> > +{
> > + u32 value;
> > +
> > + value = readl(base + JPGENC_QUALITY);
> > + value = JPGENC_SET_QUALITY(value, quality);
>
> This macro is confusing. Could we just clear the quality bits explicitly
> and then bitwise-OR the new value?
yes.guarantee other bits not be changed,quality bits is new value
>
> > + writel(value, base + JPGENC_QUALITY);
> > +}
> > +
> > +static void mtk_jpeg_enc_set_restart_interval(void __iomem *base,
> > + u32 restart_interval)
> > +{
> > + u32 value;
> > +
> > + value = readl(base + JPGENC_CTRL);
> > + if (restart_interval)
> > + value |= JPEG_ENC_CTRL_RESTART_EN_BIT;
> > + else
> > + value &= ~JPEG_ENC_CTRL_RESTART_EN_BIT;
> > + writel(value, base + JPGENC_CTRL);
> > + writel(restart_interval, base + JPGENC_RST_MCU_NUM);
> > +}
> > +
> > +static void mtk_jpeg_enc_set_encode_mode(void __iomem *base, u32 exif_en)
> > +{
> > + u32 value;
> > +
> > + value = readl(base + JPGENC_CTRL);
> > + value &= ~JPEG_ENC_CTRL_FILE_FORMAT_BIT;
> > + writel(value, base + JPGENC_CTRL);
> > +
> > + if (exif_en) {
> > + value = readl(base + JPGENC_CTRL);
> > + value |= JPEG_ENC_EN_JFIF_EXIF;
> > + writel(value, base + JPGENC_CTRL);
> > + }
> > +}
> > +
> > +static void mtk_jpeg_enc_set_ctrl_cfg(void __iomem *base, u32 exif_en,
> > + u32 quality, u32 restart_interval)
> > +{
> > + mtk_jpeg_enc_set_quality(base, quality);
> > +
> > + mtk_jpeg_enc_set_restart_interval(base, restart_interval);
> > +
> > + mtk_jpeg_enc_set_encode_mode(base, exif_en);
> > +}
> > +
> > +void mtk_jpeg_enc_start(void __iomem *base)
> > +{
> > + u32 value;
> > +
> > + value = readl(base + JPGENC_CTRL);
> > + value |= JPEG_ENC_CTRL_INT_EN_BIT | JPEG_ENC_CTRL_ENABLE_BIT;
> > + writel(value, base + JPGENC_CTRL);
> > +}
> > +
> > +void mtk_jpeg_enc_set_config(void __iomem *base,
> > + struct mtk_jpeg_enc_param *config,
> > + struct mtk_jpeg_enc_bs *bs,
> > + struct mtk_jpeg_enc_fb *fb)
> > +{
> > + mtk_jpeg_enc_set_src_img(base, config->enc_w, config->enc_h,
> > + config->enc_format, config->total_encdu);
> > + mtk_jpeg_enc_set_src_buf(base, config->img_stride, config->mem_stride,
> > + fb->fb_addr[0].dma_addr,
> > + fb->fb_addr[1].dma_addr);
> > + mtk_jpeg_enc_set_dst_buf(base, bs->dma_addr, bs->size,
> > + bs->dma_addr_offset, bs->dma_addr_offsetmask);
> > + mtk_jpeg_enc_set_ctrl_cfg(base, config->enable_exif,
> > + config->enc_quality,
> > + config->restart_interval);
> > +}
> > diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_enc_hw.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_enc_hw.h
> > new file mode 100644
> > index 000000000000..7080240f6dac
> > --- /dev/null
> > +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_enc_hw.h
> > @@ -0,0 +1,60 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (c) 2019 MediaTek Inc.
> > + * Author: Xia Jiang <xia.jiang@xxxxxxxxxxxx>
> > + *
> > + */
> > +
> > +#ifndef _MTK_JPEG_ENC_HW_H
> > +#define _MTK_JPEG_ENC_HW_H
> > +
> > +#include <media/videobuf2-core.h>
> > +
> > +#include "mtk_jpeg_core.h"
> > +#include "mtk_jpeg_enc_reg.h"
> > +
> > +#define JPEG_ENC_DST_ADDR_OFFSET_MASK GENMASK(3, 0)
> > +
> > +#define JPEG_ENC_CTRL_YUV_BIT 0x18
>
> 0x18 isn't a single bit as the _BIT suffix would suggest. Perhaps
> JPEG_ENC_CTRL_FORMAT_MASK would be more appropriate?
done
>
> > +#define JPEG_ENC_CTRL_RESTART_EN_BIT BIT(10)
> > +#define JPEG_ENC_CTRL_FILE_FORMAT_BIT BIT(5)
> > +#define JPEG_ENC_EN_JFIF_EXIF BIT(5)
> > +#define JPEG_ENC_CTRL_INT_EN_BIT BIT(2)
> > +#define JPEG_ENC_CTRL_ENABLE_BIT BIT(0)
> > +#define JPEG_ENC_RESET_BIT BIT(0)
> > +
> > +enum {
> > + MTK_JPEG_ENC_RESULT_DONE = 0,
> > + MTK_JPEG_ENC_RESULT_STALL,
> > + MTK_JPEG_ENC_RESULT_VCODEC_IRQ,
> > + MTK_JPEG_ENC_RESULT_ERROR_UNKNOWN
> > +};
>
> Do we need these intermediate error codes? Could we just use errno values
> instead?
we can just use errno values,but our interrupt status have three
state,done/stall,vcodec irq,maybe listing them here makes more clarity
>
> > +
> > +struct mtk_jpeg_enc_bs {
> > + dma_addr_t dma_addr;
> > + size_t size;
> > + u32 dma_addr_offset;
> > + u32 dma_addr_offsetmask;
> > +};
> > +
> > +struct mtk_jpeg_mem {
> > + dma_addr_t dma_addr;
> > + size_t size;
> > +};
> > +
> > +struct mtk_jpeg_enc_fb {
> > + struct mtk_jpeg_mem fb_addr[MTK_JPEG_COMP_MAX];
> > + u32 num_planes;
> > +};
>
> Please add kerneldoc comments to the structs above.
>
> nit: Separating types from names with a single space is more future-proof,
> in case someone needs to change the layout of the struct or rename fields.
done
>
> > +
> > +void mtk_jpeg_enc_reset(void __iomem *base);
> > +u32 mtk_jpeg_enc_get_int_status(void __iomem *base);
> > +u32 mtk_jpeg_enc_get_file_size(void __iomem *base);
> > +u32 mtk_jpeg_enc_enum_result(void __iomem *base, u32 irq_status,
> > + u32 *file_size);
> > +void mtk_jpeg_enc_start(void __iomem *enc_reg_base);
> > +void mtk_jpeg_enc_set_config(void __iomem *base,
> > + struct mtk_jpeg_enc_param *config,
> > + struct mtk_jpeg_enc_bs *bs,
> > + struct mtk_jpeg_enc_fb *fb);
> > +#endif /* _MTK_JPEG_ENC_HW_H */
> > diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_enc_reg.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_enc_reg.h
> > new file mode 100644
> > index 000000000000..d785621cb4c6
> > --- /dev/null
> > +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_enc_reg.h
> > @@ -0,0 +1,49 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (c) 2019 MediaTek Inc.
> > + * Author: Xia Jiang <xia.jiang@xxxxxxxxxxxx>
> > + *
> > + */
> > +#ifndef _MTK_JPEG_ENC_REG_H
> > +#define _MTK_JPEG_ENC_REG_H
> > +#define MTK_JPEG_COMP_MAX 3
>
> This doesn't look like a register-specific definition.
move it to mtk_jpeg_core.h which dec also uses it
>
> > +
> > +#define JPEG_DRV_ENC_INT_STATUS_DONE BIT(0)
> > +#define JPEG_DRV_ENC_INT_STATUS_STALL BIT(1)
> > +#define JPEG_DRV_ENC_INT_STATUS_VCODEC_IRQ BIT(4)
> > +#define JPEG_DRV_ENC_INT_STATUS_MASK_ALLIRQ 0x13
>
> Could we define this as an | of the specific bit definitions above rather
> than hardcoding?
>
> > +
> > +#define JPGENC_RSTB 0x100
>
> Could we agree on a consistent prefix for macros? Some use JPEG_ENC, some
> JPEG_DRV_ENC and some JPGENC. How about using JPEG_ENC everywhere?
done
>
> > +#define JPGENC_CTRL 0x104
> > +#define JPGENC_QUALITY 0x108
> > +#define JPGENC_BLK_NUM 0x10C
>
> nit: Hex numerals in the kernel are lowercase.
done
>
> > +#define JPGENC_BLK_CNT 0x110
> > +#define JPGENC_INT_STS 0x11C
> > +#define JPGENC_DST_ADDR0 0x120
> > +#define JPGENC_DMA_ADDR0 0x124
> > +#define JPGENC_STALL_ADDR0 0x128
> > +#define JPGENC_OFFSET_ADDR 0x138
> > +#define JPGENC_RST_MCU_NUM 0x150
> > +#define JPGENC_IMG_SIZE 0x154
> > +#define JPGENC_DEBUG_INFO0 0x160
> > +#define JPGENC_DEBUG_INFO1 0x164
> > +#define JPGENC_TOTAL_CYCLE 0x168
> > +#define JPGENC_BYTE_OFFSET_MASK 0x16C
> > +#define JPGENC_SRC_LUMA_ADDR 0x170
> > +#define JPGENC_SRC_CHROMA_ADDR 0x174
> > +#define JPGENC_STRIDE 0x178
> > +#define JPGENC_IMG_STRIDE 0x17C
> > +#define JPGENC_DCM_CTRL 0x300
> > +#define JPGENC_CODEC_SEL 0x314
> > +#define JPGENC_ULTRA_THRES 0x318
> > +
> > +#define JPGENC_FORMAT(x) (((x) & 3) << 3)
> > +#define JPGENC_WIDTH_HEIGHT(w, h) (((w) << 16) | (h))
> > +#define JPGENC_INIT_OFFSET(x) ((x) & (~0xF))
> > +#define JPGENC_OFFSET_MASK(x) ((x) & 0xF)
> > +#define JPGENC_DST_ADDR(x) ((x) & (~0xF))
> > +#define JPGENC_STALL_ADDR(x, y) (((x) + (y)) & (~0xF))
> > +#define JPGENC_QUALITY_MASK 0xFFFF0000
> > +#define JPGENC_SET_QUALITY(x, y) (((x) & JPGENC_QUALITY_MASK) | (y))
>
> JPGENC_QUALITY_MASK is only used here, so 0xffff0000 could be just used
> directly.
done
>
> > +
> > +#endif /* _MTK_JPEG_ENC_REG_H */
>
> I can see some bits defined in mtk_jpeg_enc_hw.h as well. Perhaps all these
> could be moved there too, which would make us have 1 file less?
moved bits defined and register defined to mtk_jpeg_enc_reg.h, but the
functions declaration about jpeg enc hw were in mtk_jpeg_enc_hw.h, is
that ok?
>
> Best regards,
> Tomasz
>
