On 2019-11-21 17:11, Amelie Delaunay wrote: > This patchset adds support for USB (Host and OTG) on stm32mp157a-dk1. > USB OTG HS is forced in Peripheral mode. > This patchset also fixes USB on stm32mp157c-ev1: USB PHYS supplies were missing > (CONFIG_REGULATOR_STM32_PWR) and usbotg_hs node requires phy-names property to > get the phy. > > Amelie Delaunay (5): > ARM: multi_v7_defconfig: enable STM32 PWR regulator > ARM: dts: stm32: enable USBPHYC on stm32mp157a-dk1 > ARM: dts: stm32: enable USB Host (USBH) EHCI controller on > stm32mp157a-dk1 > ARM: dts: stm32: enable USB OTG HS on stm32mp157a-dk1 > ARM: dts: stm32: add phy-names to usbotg_hs on stm32mp157c-ev1 > > arch/arm/boot/dts/stm32mp157a-dk1.dts | 28 +++++++++++++++++++++++++++ > arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 + > arch/arm/configs/multi_v7_defconfig | 1 + > 3 files changed, 30 insertions(+) I tested the series on a stm32mp157c-dk2. Tested-by: Aurelien Jarno <aurelien@xxxxxxxxxxx> -- Aurelien Jarno GPG: 4096R/1DDD8C9B aurelien@xxxxxxxxxxx http://www.aurel32.net
