On Tue, Nov 26, 2019 at 01:34:50PM +0800, freddy.hsin@xxxxxxxxxxxx wrote:
> From: Freddy Hsin <freddy.hsin@xxxxxxxxxxxx>
>
> Add documentation for MTK RGU (Reset Generation Unit) reboot driver.
>
> Signed-off-by: Freddy Hsin <freddy.hsin@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/power/reset/mtk-reboot.txt | 30 ++++++++++++++++++++
> 1 file changed, 30 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/reset/mtk-reboot.txt
>
> diff --git a/Documentation/devicetree/bindings/power/reset/mtk-reboot.txt b/Documentation/devicetree/bindings/power/reset/mtk-reboot.txt
> new file mode 100644
> index 0000000..708d351
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/mtk-reboot.txt
> @@ -0,0 +1,30 @@
> +Generic MTK RGU mapped register reset driver
> +
> +This is a reset driver using toprgu to map its non-volatile register.
> +The reset is generally performed with a write to the non-volatile register
> +defined by the register map pointed by toprgu reference plus the offset
> +with the mask defined in the reboot-mode node.
> +
> +Required properties:
> +- compatible: should contain "toprgu-reboot-mode"
What's wrong with syscon-reboot-mode?
> +- regmap: this is phandle to the register map node
Make this node a child node of the phandle and get rid of this.
> +- offset: offset in the register map for the reboot-mode register (in bytes)
> +- mask: the reset value written to the reboot register (32 bit access)
> +
> +Examples:
> + reboot-mode {
> + compatible = "toprgu-reboot-mode";
> + regmap = <&toprgu>;
> + offset = <0x24>;
> + mask = <0xF>;
> + };
> +
> +Optional properties - reboot mode value that will keep in toprgu nonrst RG:
> +- mode-charger = <BOOT_CHARGER>;
> +- mode-recovery = <BOOT_RECOVERY>;
> +- mode-bootloader = <BOOT_BOOTLOADER>;
> +- mode-dm-verity-dev-corrupt = <BOOT_DM_VERITY>;
> +- mode-kpoc = <BOOT_KPOC>;
> +- mode-ddr-reserve = <BOOT_DDR_RSVD>;
> +- mode-meta = <BOOT_META>;
> +- mode-rpmbpk = <BOOT_RPMBPK>;
> --
> 1.7.9.5
