On Wed, Dec 4, 2019 at 6:25 PM Brian Masney <masneyb@xxxxxxxxxxxxx> wrote: > > Add support for clock-based vibrator devices where the speed can be > controlled by changing the duty cycle. > > Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> > --- > .../bindings/input/clk-vibrator.yaml | 60 +++++++++++++++++++ > 1 file changed, 60 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/clk-vibrator.yaml > > diff --git a/Documentation/devicetree/bindings/input/clk-vibrator.yaml b/Documentation/devicetree/bindings/input/clk-vibrator.yaml > new file mode 100644 > index 000000000000..2103a5694fad > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/clk-vibrator.yaml > @@ -0,0 +1,60 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/bindings/input/clk-vibrator.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Clock vibrator > + > +maintainers: > + - Brian Masney <masneyb@xxxxxxxxxxxxx> > + > +description: | > + Support for clock-based vibrator devices where the speed can be controlled > + by changing the duty cycle. > + > +properties: > + compatible: > + const: clk-vibrator > + > + clocks: > + maxItems: 1 > + > + clock-names: > + description: output clock that controls the speed > + items: > + - const: core No point in making up a name when there's only one clock, so drop. > + > + clock-frequency: true Given the frequency is variable, what does this mean in this case? > + enable-gpios: > + maxItems: 1 > + > + vcc-supply: > + description: Regulator that provides power > + > +required: > + - compatible > + - clocks > + - clock-names > + - clock-frequency Add: additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,mmcc-msm8974.h> > + #include <dt-bindings/gpio/gpio.h> > + > + vibrator { > + compatible = "clk-vibrator"; > + > + vcc-supply = <&pm8941_l19>; > + > + clocks = <&mmcc CAMSS_GP1_CLK>; > + clock-names = "core"; > + clock-frequency = <24000>; > + > + enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&vibrator_pin>; > + }; > -- > 2.21.0 >
