Re: [PATCH] ARM: dts: stm32: remove "@" from stm32f7 pinmux groups

[Alexandre Torgue <alexandre.torgue@xxxxxx>]

Hi Benjamin

On 11/25/19 1:12 PM, Benjamin Gaignard wrote:
> Replace all "@" by "_" in pinmux groups for stm32f7 family.
> This avoid errors when using yaml to check the bindings.
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
> ---
>   arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 22 +++++++++++-----------
>   1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> index 9314128df185..5271df1017cb 100644
> --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> @@ -127,7 +127,7 @@
>   				st,bank-name = "GPIOK";
>   			};
>   
> -			cec_pins_a: cec@0 {
> +			cec_pins_a: cec_0 {

You fix a warning by adding a new one. Please use "cec-0" instead of 
"cec_0". To be done for all changes in this file.

regards
Alex


>   				pins {
>   					pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
>   					slew-rate = <0>;
> @@ -136,7 +136,7 @@
>   				};
>   			};
>   
> -			usart1_pins_a: usart1@0 {
> +			usart1_pins_a: usart1_0 {
>   				pins1 {
>   					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
>   					bias-disable;
> @@ -149,7 +149,7 @@
>   				};
>   			};
>   
> -			usart1_pins_b: usart1@1 {
> +			usart1_pins_b: usart1_1 {
>   				pins1 {
>   					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
>   					bias-disable;
> @@ -162,7 +162,7 @@
>   				};
>   			};
>   
> -			i2c1_pins_b: i2c1@0 {
> +			i2c1_pins_b: i2c1_0 {
>   				pins {
>   					pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
>   						 <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
> @@ -172,7 +172,7 @@
>   				};
>   			};
>   
> -			usbotg_hs_pins_a: usbotg-hs@0 {
> +			usbotg_hs_pins_a: usbotg-hs_0 {
>   				pins {
>   					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
>   						 <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
> @@ -192,7 +192,7 @@
>   				};
>   			};
>   
> -			usbotg_hs_pins_b: usbotg-hs@1 {
> +			usbotg_hs_pins_b: usbotg-hs_1 {
>   				pins {
>   					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
>   						 <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
> @@ -212,7 +212,7 @@
>   				};
>   			};
>   
> -			usbotg_fs_pins_a: usbotg-fs@0 {
> +			usbotg_fs_pins_a: usbotg-fs_0 {
>   				pins {
>   					pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
>   						 <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
> @@ -223,7 +223,7 @@
>   				};
>   			};
>   
> -			sdio_pins_a: sdio_pins_a@0 {
> +			sdio_pins_a: sdio_pins_a_0 {
>   				pins {
>   					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
>   						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
> @@ -236,7 +236,7 @@
>   				};
>   			};
>   
> -			sdio_pins_od_a: sdio_pins_od_a@0 {
> +			sdio_pins_od_a: sdio_pins_od_a_0 {
>   				pins1 {
>   					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
>   						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
> @@ -254,7 +254,7 @@
>   				};
>   			};
>   
> -			sdio_pins_b: sdio_pins_b@0 {
> +			sdio_pins_b: sdio_pins_b_0 {
>   				pins {
>   					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
>   						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
> @@ -267,7 +267,7 @@
>   				};
>   			};
>   
> -			sdio_pins_od_b: sdio_pins_od_b@0 {
> +			sdio_pins_od_b: sdio_pins_od_b_0 {
>   				pins1 {
>   					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
>   						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */