On Wed, Dec 4, 2019 at 12:13 PM Clement Leger <cleger@xxxxxxxxx> wrote:
>
> Synopsys DWAPB IP includes support for pin control. This control is basic
> and allows to switch between a hardware and a software function.
> Software function is when driving GPIOs from IP and hardware is controlled
> by external signals.
> This serie export necessary interface to be able to move the driver to
> pinctrl folder and then implement the pinctrl support which is based on the
> digicolor driver. The idea is to avoid hardcoding pins in driver since
> this IP is a generic one available on multiple SoC.
>
This series misses at least GPIO ACPI maintainers to be Cc'ed to for
the certain changes.
Moreover, I would like to see entire series in the future in my mailbox.
I will look at v1 closer anyway.
> Clement Leger (5):
> gpio: export acpi_gpiochip_request_interrupts in gpio/driver.h
> pinctrl: dw: move gpio-dwapb.c to pinctrl folder
> pinctrl: dw: use devm_gpiochip_add_data
> pinctrl: dw: add pinctrl support for dwapb gpio driver
> dt-bindings: pinctrl: dw: move sps,dwapb-gpio.txt to pinctrl
>
> .../bindings/{gpio => pinctrl}/snps-dwapb-gpio.txt | 21 +-
> MAINTAINERS | 6 +-
> drivers/gpio/Kconfig | 8 -
> drivers/gpio/Makefile | 1 -
> drivers/gpio/gpiolib-acpi.h | 4 -
> drivers/pinctrl/Kconfig | 1 +
> drivers/pinctrl/Makefile | 1 +
> drivers/pinctrl/dw/Kconfig | 11 +
> drivers/pinctrl/dw/Makefile | 4 +
> .../gpio-dwapb.c => pinctrl/dw/pinctrl-dwapb.c} | 277 +++++++++++++++++++--
> include/linux/gpio/driver.h | 12 +
> include/linux/platform_data/gpio-dwapb.h | 1 +
> 12 files changed, 310 insertions(+), 37 deletions(-)
> rename Documentation/devicetree/bindings/{gpio => pinctrl}/snps-dwapb-gpio.txt (76%)
> create mode 100644 drivers/pinctrl/dw/Kconfig
> create mode 100644 drivers/pinctrl/dw/Makefile
> rename drivers/{gpio/gpio-dwapb.c => pinctrl/dw/pinctrl-dwapb.c} (77%)
>
> --
> 2.15.0.276.g89ea799
>
--
With Best Regards,
Andy Shevchenko
