Update the compatibles to use jedec,spi-nor.
Also update the max-frequency to 50MHz and spi-tx-bus-width to 1.
Align the QSPI node with other similar boards like(ls1088ardb,
ls1046afrwy) as per bindings.
Signed-off-by: Kuldeep Singh <kuldeep.singh@xxxxxxx>
Signed-off-by: Ashish Kumar <Ashish.Kumar@xxxxxxx>
---
v2:
Rebased to top
Use "jedec,spi-nor" in compatibles
.../arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 0c742befb761..dbc23d6cd3b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -101,23 +101,23 @@
&qspi {
status = "okay";
- qflash0: flash@0 {
- compatible = "spansion,m25p80";
+ s25fs512s0: flash@0 {
+ compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
- spi-max-frequency = <20000000>;
+ spi-max-frequency = <50000000>;
spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
reg = <0>;
};
- qflash1: flash@1 {
- compatible = "spansion,m25p80";
+ s25fs512s1: flash@1 {
+ compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
- spi-max-frequency = <20000000>;
+ spi-max-frequency = <50000000>;
spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
reg = <1>;
};
};
--
2.17.1
