On Wed, 04 Dec 2019 04:34:32 +0000,
Xiaowei Bao <xiaowei.bao@xxxxxxx> wrote:
>
>
>
> > -----Original Message-----
> > From: Robin Murphy <robin.murphy@xxxxxxx>
> > Sent: 2019年12月3日 23:20
> > To: Marc Zyngier <maz@xxxxxxxxxx>; Xiaowei Bao <xiaowei.bao@xxxxxxx>
> > Cc: Roy Zang <roy.zang@xxxxxxx>; lorenzo.pieralisi@xxxxxxx;
> > devicetree@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; Z.q. Hou
> > <zhiqiang.hou@xxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx; M.h. Lian
> > <minghuan.lian@xxxxxxx>; robh+dt@xxxxxxxxxx;
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; bhelgaas@xxxxxxxxxx;
> > andrew.murray@xxxxxxx; frowand.list@xxxxxxxxx; Mingkai Hu
> > <mingkai.hu@xxxxxxx>
> > Subject: Re: [PATCH] PCI: layerscape: Add the SRIOV support in host side
> >
> > On 03/12/2019 11:51 am, Marc Zyngier wrote:
> > > On 2019-12-03 01:42, Xiaowei Bao wrote:
> > >>> -----Original Message-----
> > >>> From: Marc Zyngier <maz@xxxxxxxxxxxxxxx>
> > >>> Sent: 2019年12月2日 20:48
> > >>> To: Xiaowei Bao <xiaowei.bao@xxxxxxx>
> > >>> Cc: robh+dt@xxxxxxxxxx; frowand.list@xxxxxxxxx; M.h. Lian
> > >>> <minghuan.lian@xxxxxxx>; Mingkai Hu <mingkai.hu@xxxxxxx>; Roy
> > Zang
> > >>> <roy.zang@xxxxxxx>; lorenzo.pieralisi@xxxxxxx;
> > >>> andrew.murray@xxxxxxx; bhelgaas@xxxxxxxxxx;
> > >>> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> > >>> linux-pci@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > >>> Z.q. Hou <zhiqiang.hou@xxxxxxx>
> > >>> Subject: Re: [PATCH] PCI: layerscape: Add the SRIOV support in host
> > >>> side
> > >>>
> > >>> On 2019-12-02 10:45, Xiaowei Bao wrote:
> > >>> > GIC get the map relations of devid and stream id from the msi-map
> > >>> > property of DTS, our platform add this property in u-boot base on
> > >>> > the PCIe device in the bus, but if enable the vf device in kernel,
> > >>> > the vf device msi-map will not set, so the vf device can't work,
> > >>> > this patch purpose is that manage the stream id and device id map
> > >>> > relations dynamically in kernel, and make the new PCIe device work in
> > kernel.
> > >>> >
> > >>> > Signed-off-by: Xiaowei Bao <xiaowei.bao@xxxxxxx>
> > >>> > ---
> > >>> > drivers/of/irq.c | 9 +++
> > >>> > drivers/pci/controller/dwc/pci-layerscape.c | 94
> > >>> > +++++++++++++++++++++++++++++
> > >>> > drivers/pci/probe.c | 6 ++
> > >>> > drivers/pci/remove.c | 6 ++
> > >>> > 4 files changed, 115 insertions(+)
> > >>> >
> > >>> > diff --git a/drivers/of/irq.c b/drivers/of/irq.c index
> > >>> > a296eaf..791e609 100644
> > >>> > --- a/drivers/of/irq.c
> > >>> > +++ b/drivers/of/irq.c
> > >>> > @@ -576,6 +576,11 @@ void __init of_irq_init(const struct
> > >>> >of_device_id
> > >>> > *matches)
> > >>> > }
> > >>> > }
> > >>> >
> > >>> > +u32 __weak ls_pcie_streamid_fix(struct device *dev, u32 rid) {
> > >>> > + return rid;
> > >>> > +}
> > >>> > +
> > >>> > static u32 __of_msi_map_rid(struct device *dev, struct
> > >>> >device_node **np,
> > >>> > u32 rid_in)
> > >>> > {
> > >>> > @@ -590,6 +595,10 @@ static u32 __of_msi_map_rid(struct device
> > >>> >*dev, struct device_node **np,
> > >>> > if (!of_map_rid(parent_dev->of_node, rid_in, "msi-map",
> > >>> > "msi-map-mask", np, &rid_out))
> > >>> > break;
> > >>> > +
> > >>> > + if (rid_out == rid_in)
> > >>> > + rid_out = ls_pcie_streamid_fix(parent_dev, rid_in);
> > >>>
> > >>> Over my dead body. Get your firmware to properly program the LUT so
> > >>> that it presents the ITS with a reasonable topology. There is
> > >>> absolutely no way this kind of change makes it into the kernel.
> > >>
> > >> Sorry for this, I know it is not reasonable, but I have no other way,
> > >> as I know, ARM get the mapping of stream ID to request ID from the
> > >> msi-map property of DTS, if add a new device which need the stream ID
> > >> and try to get it from the msi-map of DTS, it will failed and not
> > >> work, yes? So could you give me a better advice to fix this issue, I
> > >> would really appreciate any comments or suggestions, thanks a lot.
> > >
> > > Why can't firmware expose an msi-map/msi-map-mask that has a large
> > > enough range to ensure mapping of VFs? What are the limitations of the
> > > LUT that would prevent this from being configured before the kernel
> > > boots?
>
> Thanks for your comments, yes, this is the root cause, we only have
> 16 stream IDs for PCIe domain, this is the hardware limitation, if
> there have enough stream IDs, we can expose an msi-map/msi-map-mask
> for all PCIe devices in system, unfortunately, the stream IDs is not
> enough, I think other ARM vendor have same issue that they don't
> have enough stream IDs.
Not that I know off.
I'm using a number of ARM-based, SMMU-equipped HW that works just
fine. SR-IOV is perfectly functional on these platforms, and it seems
that only FSL/NXP HW requires hacks of this sort.
M.
--
Jazz is not dead, it just smells funny.
