On Wed, Nov 06, 2019 at 05:52:15PM +0200, Ioana Ciornei wrote:
> Add the External MDIO1 device node found in the WRIOP global memory
> region. This is needed for management of external PHYs.
>
> Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index 80268c6ed5fb..8b87a0122b54 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -478,6 +478,17 @@
> little-endian;
> };
>
> + /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
> + emdio1: mdio@8b96000 {
Please find the place for the node in order of unit-address.
Shawn
> + compatible = "fsl,fman-memac-mdio";
> + reg = <0x0 0x8b96000 0x0 0x1000>;
> + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + little-endian;
> + status = "disabled";
> + };
> +
> i2c0: i2c@2000000 {
> compatible = "fsl,vf610-i2c";
> #address-cells = <1>;
> --
> 1.9.1
>
