Currently only peripheral clocks are supported for Broadcom platforms that use Kona style CCUs for clocking. This series adds support for bus clocks as well. One motivation for doing this is that there exist peripheral clocks that cannot be configured without having first enabled a related bus; the peripheral clock registers are simply inaccessible if the bus clock is not enabled. So adding bus clock support allows such clocks to be usable. This also imposes a new requirement, however--that the bus clock be enabled *before* the clock that depends on it. For this, we define the notion of a "prerequisite" clock. If a clock has a prerequisite specified, that prequisite clock will be initialized first. For now this only affects startup-time initialization. These patches are based on Mike Turquette's current "clk-next" branch. They are available here: http://git.linaro.org/landing-teams/working/broadcom/kernel.git Branch review/bcm-bus-clk -Alex Alex Elder (5): clk: bcm281xx: add an initialized flag clk: bcm281xx: implement prerequisite clocks clk: bcm281xx: add bus clock support clk: bcm281xx: define a bus clock ARM: dts: add bus clock bsc3_apb for bcm281xx arch/arm/boot/dts/bcm11351.dtsi | 3 +- drivers/clk/bcm/clk-bcm281xx.c | 13 +++- drivers/clk/bcm/clk-kona-setup.c | 112 ++++++++++++++++++++++++++++++-- drivers/clk/bcm/clk-kona.c | 120 ++++++++++++++++++++++++++++++++++- drivers/clk/bcm/clk-kona.h | 35 +++++++++- include/dt-bindings/clock/bcm281xx.h | 3 +- 6 files changed, 271 insertions(+), 15 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html