[PATCH v3 1/8] dt: amd-seattle: remove Husky platform

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Huskyboard never made it to production, and its successor the
Celloboard was only shipped in very limited quantities with ACPI
only firmware, so the historical significance of husky.dts is
highly questionable. Let's drop it.

Signed-off-by: Ard Biesheuvel <ardb@xxxxxxxxxx>
---
 arch/arm64/boot/dts/amd/Makefile  |  3 +-
 arch/arm64/boot/dts/amd/husky.dts | 84 --------------------
 2 files changed, 1 insertion(+), 86 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index 6a6093064a32..5e27bc0321e9 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,4 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
-			amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb \
-			husky.dtb
+			amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
diff --git a/arch/arm64/boot/dts/amd/husky.dts b/arch/arm64/boot/dts/amd/husky.dts
deleted file mode 100644
index 7acde34772cb..000000000000
--- a/arch/arm64/boot/dts/amd/husky.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * DTS file for AMD/Linaro 96Boards Enterprise Edition Server (Husky) Board
- * Note: Based-on AMD Seattle Rev.B0
- *
- * Copyright (C) 2015 Advanced Micro Devices, Inc.
- */
-
-/dts-v1/;
-
-/include/ "amd-seattle-soc.dtsi"
-
-/ {
-	model = "Linaro 96Boards Enterprise Edition Server (Husky) Board";
-	compatible = "amd,seattle-overdrive", "amd,seattle";
-
-	chosen {
-		stdout-path = &serial0;
-	};
-
-	psci {
-		compatible   = "arm,psci-0.2";
-		method       = "smc";
-	};
-};
-
-&ccp0 {
-	status = "ok";
-	amd,zlib-support = <1>;
-};
-
-/**
- * NOTE: In Rev.B, gpio0 is reserved.
- */
-&gpio1 {
-	status = "ok";
-};
-
-&gpio2 {
-	status = "ok";
-};
-
-&gpio3 {
-	status = "ok";
-};
-
-&gpio4 {
-	status = "ok";
-};
-
-&i2c0 {
-	status = "ok";
-};
-
-&i2c1 {
-	status = "ok";
-};
-
-&pcie0 {
-	status = "ok";
-};
-
-&spi0 {
-	status = "ok";
-};
-
-&spi1 {
-	status = "ok";
-	sdcard0: sdcard@0 {
-		compatible = "mmc-spi-slot";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		voltage-ranges = <3200 3400>;
-		pl022,hierarchy = <0>;
-		pl022,interface = <0>;
-		pl022,com-mode = <0x0>;
-		pl022,rx-level-trig = <0>;
-		pl022,tx-level-trig = <0>;
-	};
-};
-
-&smb0 {
-	/include/ "amd-seattle-xgbe-b.dtsi"
-};
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux