On 28/11/2019 3:42 pm, Sudeep Holla wrote:
This reverts commit 193d00a2b35ee3353813b4006a18131122087205.
Commit 951d48855d86 ("of: Make of_dma_get_range() work on bus nodes")
reworked the logic such that of_dma_get_range() works correctly
starting from a bus node containing "dma-ranges".
Since on Juno we don't have a SoC level bus node and "dma-ranges" is
present only in the root node, we get the following error:
OF: translation of DMA address(0) to CPU address failed node(/sram@2e000000)
OF: translation of DMA address(0) to CPU address failed node(/uart@7ff80000)
...
OF: translation of DMA address(0) to CPU address failed node(/mhu@2b1f0000)
OF: translation of DMA address(0) to CPU address failed node(/iommu@2b600000)
OF: translation of DMA address(0) to CPU address failed node(/iommu@2b600000)
OF: translation of DMA address(0) to CPU address failed node(/iommu@2b600000)
So let's fix it by dropping the "dma-ranges" property for now. We can
add it later with a proper SoC bus node and moving all the devices that
belong there along with the "dma-ranges" if required.
Acked-by: Robin Murphy <robin.murphy@xxxxxxx>
As mentioned before, this is fine since it doesn't represent any kind of
device-visible restriction; it was only there for completeness, and
we've since given in to the assumption that missing "dma-ranges" implies
a 1:1 mapping anyway.
Thanks,
Robin.
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Liviu Dudau <liviu.dudau@xxxxxxx>
Cc: Robin Murphy <robin.murphy@xxxxxxx>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Signed-off-by: Sudeep Holla <sudeep.holla@xxxxxxx>
---
arch/arm64/boot/dts/arm/juno-base.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 9e3e8ce6adfe..1f3c80aafbd7 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -6,7 +6,6 @@
/*
* Devices shared by all Juno boards
*/
- dma-ranges = <0 0 0 0 0x100 0>;
memtimer: timer@2a810000 {
compatible = "arm,armv7-timer-mem";