Hi Heiko, The necessary patches for this change have been merged into bluetooth-next. Please pick this up at your convenience. This patch enables using the Broadcom HCI UART driver with the BCM43540 Wi-Fi + Bluetooth chip. This chip is used on a RK3288 based board (Veyron) and these changes have been tested on the Minnie variant of the board (i.e. rk3288-veyron-minnie.dts). The changes are applicable to the minnie, mickey, speedy and brain variants (all of which use the Broadcom chips). The bt-activity node was removed for all Veyron boards and shouldn't affect the boards using Marvell chips since they aren't using this out-of-band wakeup gpio. A previous portion of this series adding the compatible string to the hci_bcm driver has already been merged into bluetooth-next: https://lore.kernel.org/r/4680AA6A-599F-4D5E-9A96-0655569BAE94@xxxxxxxxxxxx Another patch series to fix up the baudrate settings and configure the PCM parameters has meen merged on bluetooth-next: https://lore.kernel.org/linux-bluetooth/20191127071105.GA32820@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/T/#t Thanks Abhishek Changes in v2: - Changed sco routing params to brcm,bt-pcm-int-params Abhishek Pandit-Subedi (1): ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron arch/arm/boot/dts/rk3288-veyron-brain.dts | 9 +++ .../dts/rk3288-veyron-broadcom-bluetooth.dtsi | 22 +++++++ .../boot/dts/rk3288-veyron-chromebook.dtsi | 21 ------- arch/arm/boot/dts/rk3288-veyron-fievel.dts | 2 - arch/arm/boot/dts/rk3288-veyron-jaq.dts | 22 +++++++ arch/arm/boot/dts/rk3288-veyron-jerry.dts | 22 +++++++ arch/arm/boot/dts/rk3288-veyron-mickey.dts | 9 +++ arch/arm/boot/dts/rk3288-veyron-minnie.dts | 21 +++++++ arch/arm/boot/dts/rk3288-veyron-pinky.dts | 22 +++++++ arch/arm/boot/dts/rk3288-veyron-speedy.dts | 21 +++++++ arch/arm/boot/dts/rk3288-veyron.dtsi | 59 +++---------------- 11 files changed, 155 insertions(+), 75 deletions(-) create mode 100644 arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi -- 2.24.0.432.g9d3f5f5b63-goog
