1.Add the USB OTC clock driver for the X1000 Soc from Ingenic.
2.Use the "CLK_OF_DECLARE_DRIVER" instead "CLK_OF_DECLARE" like
the other CGU drivers.
Signed-off-by: Zhou Yanjie <zhouyanjie@xxxxxxxx>
---
drivers/clk/ingenic/x1000-cgu.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index 7179b9f..7da7c69 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -18,6 +18,11 @@
#define CGU_REG_CLKGR 0x20
#define CGU_REG_OPCR 0x24
#define CGU_REG_DDRCDR 0x2c
+#define CGU_REG_USBPCR 0x3c
+#define CGU_REG_USBRDT 0x40
+#define CGU_REG_USBVBFIL 0x44
+#define CGU_REG_USBPCR1 0x48
+#define CGU_REG_USBCDR 0x50
#define CGU_REG_MACCDR 0x54
#define CGU_REG_I2SCDR 0x60
#define CGU_REG_LPCDR 0x64
@@ -184,6 +189,15 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
.gate = { CGU_REG_CLKGR, 5 },
},
+ [X1000_CLK_OTG] = {
+ "otg", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+ .parents = { X1000_CLK_EXCLK, -1,
+ X1000_CLK_APLL, X1000_CLK_MPLL },
+ .mux = { CGU_REG_USBCDR, 30, 2 },
+ .div = { CGU_REG_USBCDR, 0, 1, 8, 29, 28, 27 },
+ .gate = { CGU_REG_CLKGR, 3 },
+ },
+
[X1000_CLK_SSIPLL] = {
"ssi_pll", CGU_CLK_MUX | CGU_CLK_DIV,
.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL, -1, -1 },
@@ -273,4 +287,4 @@ static void __init x1000_cgu_init(struct device_node *np)
ingenic_cgu_register_syscore_ops(cgu);
}
-CLK_OF_DECLARE(x1000_cgu, "ingenic,x1000-cgu", x1000_cgu_init);
+CLK_OF_DECLARE_DRIVER(x1000_cgu, "ingenic,x1000-cgu", x1000_cgu_init);
--
2.7.4
