Some components (e.g. SDI, I2C) can be used with different pin assignments.
Before we can add the alternative configurations, we need to rename the
current configurations to more generic names.
Each pin configuration usually configures one specific pin group.
Therefore we rename the configurations to use the pin group as name.
Make up for the slightly longer names by removing the "_mode" suffix.
Rename all existing uses to use the new labels.
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi | 58 ++++++++++-----------
arch/arm/boot/dts/ste-href.dtsi | 62 +++++++++++++----------
arch/arm/boot/dts/ste-snowball.dts | 52 +++++++++----------
3 files changed, 90 insertions(+), 82 deletions(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
index fbc41cacf690..b3ef91b98207 100644
--- a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
@@ -8,7 +8,7 @@
&pinctrl {
/* Settings for all UART default and sleep states */
uart0 {
- uart0_default_mode: uart0_default {
+ u0_a_1_default: u0_a_1_default {
default_mux {
function = "u0";
groups = "u0_a_1";
@@ -23,7 +23,7 @@
};
};
- uart0_sleep_mode: uart0_sleep {
+ u0_a_1_sleep: u0_a_1_sleep {
sleep_cfg1 {
pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
ste,config = <&slpm_in_wkup_pdis>;
@@ -40,7 +40,7 @@
};
uart1 {
- uart1_default_mode: uart1_default {
+ u1rxtx_a_1_default: u1rxtx_a_1_default {
default_mux {
function = "u1";
groups = "u1rxtx_a_1";
@@ -55,7 +55,7 @@
};
};
- uart1_sleep_mode: uart1_sleep {
+ u1rxtx_a_1_sleep: u1rxtx_a_1_sleep {
sleep_cfg1 {
pins = "GPIO4_AH6"; /* RXD */
ste,config = <&slpm_in_wkup_pdis>;
@@ -68,7 +68,7 @@
};
uart2 {
- uart2_default_mode: uart2_default {
+ u2rxtx_c_1_default: u2rxtx_c_1_default {
default_mux {
function = "u2";
groups = "u2rxtx_c_1";
@@ -83,7 +83,7 @@
};
};
- uart2_sleep_mode: uart2_sleep {
+ u2rxtx_c_1_sleep: u2rxtx_c_1_sleep {
sleep_cfg1 {
pins = "GPIO29_W2"; /* RXD */
ste,config = <&in_wkup_pdis>;
@@ -97,7 +97,7 @@
/* Settings for all I2C default and sleep states */
i2c0 {
- i2c0_default_mode: i2c_default {
+ i2c0_a_1_default: i2c0_a_1_default {
default_mux {
function = "i2c0";
groups = "i2c0_a_1";
@@ -108,7 +108,7 @@
};
};
- i2c0_sleep_mode: i2c_sleep {
+ i2c0_a_1_sleep: i2c0_a_1_sleep {
sleep_cfg1 {
pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
@@ -117,7 +117,7 @@
};
i2c1 {
- i2c1_default_mode: i2c_default {
+ i2c1_b_2_default: i2c1_b_2_default {
default_mux {
function = "i2c1";
groups = "i2c1_b_2";
@@ -128,7 +128,7 @@
};
};
- i2c1_sleep_mode: i2c_sleep {
+ i2c1_b_2_sleep: i2c1_b_2_sleep {
sleep_cfg1 {
pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
@@ -137,7 +137,7 @@
};
i2c2 {
- i2c2_default_mode: i2c_default {
+ i2c2_b_2_default: i2c2_b_2_default {
default_mux {
function = "i2c2";
groups = "i2c2_b_2";
@@ -148,7 +148,7 @@
};
};
- i2c2_sleep_mode: i2c_sleep {
+ i2c2_b_2_sleep: i2c2_b_2_sleep {
sleep_cfg1 {
pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
@@ -157,7 +157,7 @@
};
i2c3 {
- i2c3_default_mode: i2c_default {
+ i2c3_c_2_default: i2c3_c_2_default {
default_mux {
function = "i2c3";
groups = "i2c3_c_2";
@@ -168,7 +168,7 @@
};
};
- i2c3_sleep_mode: i2c_sleep {
+ i2c3_c_2_sleep: i2c3_c_2_sleep {
sleep_cfg1 {
pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
@@ -181,7 +181,7 @@
* enable I2C4 and UART1 at the same time.
*/
i2c4 {
- i2c4_default_mode: i2c_default {
+ i2c4_b_1_default: i2c4_b_1_default {
default_mux {
function = "i2c4";
groups = "i2c4_b_1";
@@ -192,7 +192,7 @@
};
};
- i2c4_sleep_mode: i2c_sleep {
+ i2c4_b_1_sleep: i2c4_b_1_sleep {
sleep_cfg1 {
pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
ste,config = <&slpm_in_wkup_pdis>;
@@ -203,7 +203,7 @@
/* Settings for all MMC/SD/SDIO default and sleep states */
sdi0 {
/* This is the external SD card slot, 4 bits wide */
- sdi0_default_mode: sdi0_default {
+ mc0_a_1_default: mc0_a_1_default {
default_mux {
function = "mc0";
groups = "mc0_a_1";
@@ -234,7 +234,7 @@
};
};
- sdi0_sleep_mode: sdi0_sleep {
+ mc0_a_1_sleep: mc0_a_1_sleep {
sleep_cfg1 {
pins =
"GPIO18_AC2", /* CMDDIR */
@@ -261,7 +261,7 @@
sdi1 {
/* This is the WLAN SDIO 4 bits wide */
- sdi1_default_mode: sdi1_default {
+ mc1_a_1_default: mc1_a_1_default {
default_mux {
function = "mc1";
groups = "mc1_a_1";
@@ -285,7 +285,7 @@
};
};
- sdi1_sleep_mode: sdi1_sleep {
+ mc1_a_1_sleep: mc1_a_1_sleep {
sleep_cfg1 {
pins = "GPIO208_AH16"; /* CLK */
ste,config = <&slpm_out_lo_wkup_pdis>;
@@ -305,7 +305,7 @@
sdi2 {
/* This is the eMMC 8 bits wide, usually PoP eMMC */
- sdi2_default_mode: sdi2_default {
+ mc2_a_1_default: mc2_a_1_default {
default_mux {
function = "mc2";
groups = "mc2_a_1";
@@ -333,7 +333,7 @@
};
};
- sdi2_sleep_mode: sdi2_sleep {
+ mc2_a_1_sleep: mc2_a_1_sleep {
sleep_cfg1 {
pins = "GPIO128_A5"; /* CLK */
ste,config = <&out_lo_wkup_pdis>;
@@ -361,7 +361,7 @@
sdi4 {
/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
- sdi4_default_mode: sdi4_default {
+ mc4_a_1_default: mc4_a_1_default {
default_mux {
function = "mc4";
groups = "mc4_a_1";
@@ -389,7 +389,7 @@
};
};
- sdi4_sleep_mode: sdi4_sleep {
+ mc4_a_1_sleep: mc4_a_1_sleep {
sleep_cfg1 {
pins = "GPIO203_AE23"; /* CLK */
ste,config = <&out_lo_wkup_pdis>;
@@ -416,7 +416,7 @@
* cannot be muxed onto any pins.
*/
msp0 {
- msp0_default_mode: msp0_default {
+ msp0txrxtfstck_a_1_default: msp0txrxtfstck_a_1_default {
default_msp0_mux {
function = "msp0";
groups = "msp0txrx_a_1", "msp0tfstck_a_1";
@@ -433,7 +433,7 @@
};
msp1 {
- msp1_default_mode: msp1_default {
+ msp1txrx_a_1_default: msp1txrx_a_1_default {
default_mux {
function = "msp1";
groups = "msp1txrx_a_1", "msp1_a_1";
@@ -453,7 +453,7 @@
};
msp2 {
- msp2_default_mode: msp2_default {
+ msp2_a_1_default: msp2_a_1_default {
/* MSP2 usually used for HDMI audio */
default_mux {
function = "msp2";
@@ -474,7 +474,7 @@
};
musb {
- musb_default_mode: musb_default {
+ usb_a_1_default: usb_a_1_default {
default_mux {
function = "usb";
groups = "usb_a_1";
@@ -500,7 +500,7 @@
};
};
- musb_sleep_mode: musb_sleep {
+ usb_a_1_sleep: usb_a_1_sleep {
sleep_cfg1 {
pins =
"GPIO256_AF28", /* NXT */
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 4f6acbd8c040..7613a40421d5 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -16,41 +16,41 @@
soc {
uart@80120000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart0_default_mode>;
- pinctrl-1 = <&uart0_sleep_mode>;
+ pinctrl-0 = <&u0_a_1_default>;
+ pinctrl-1 = <&u0_a_1_sleep>;
status = "okay";
};
/* This UART is unused and thus left disabled */
uart@80121000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart1_default_mode>;
- pinctrl-1 = <&uart1_sleep_mode>;
+ pinctrl-0 = <&u1rxtx_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep>;
};
uart@80007000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart2_default_mode>;
- pinctrl-1 = <&uart2_sleep_mode>;
+ pinctrl-0 = <&u2rxtx_c_1_default>;
+ pinctrl-1 = <&u2rxtx_c_1_sleep>;
status = "okay";
};
i2c@80004000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c0_default_mode>;
- pinctrl-1 = <&i2c0_sleep_mode>;
+ pinctrl-0 = <&i2c0_a_1_default>;
+ pinctrl-1 = <&i2c0_a_1_sleep>;
};
i2c@80122000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c1_default_mode>;
- pinctrl-1 = <&i2c1_sleep_mode>;
+ pinctrl-0 = <&i2c1_b_2_default>;
+ pinctrl-1 = <&i2c1_b_2_sleep>;
};
i2c@80128000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c2_default_mode>;
- pinctrl-1 = <&i2c2_sleep_mode>;
+ pinctrl-0 = <&i2c2_b_2_default>;
+ pinctrl-1 = <&i2c2_b_2_sleep>;
lp5521@33 {
compatible = "national,lp5521";
reg = <0x33>;
@@ -96,8 +96,8 @@
i2c@80110000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c3_default_mode>;
- pinctrl-1 = <&i2c3_sleep_mode>;
+ pinctrl-0 = <&i2c3_c_2_default>;
+ pinctrl-1 = <&i2c3_c_2_sleep>;
};
/* ST6G3244ME level translator for 1.8/2.9 V */
@@ -132,8 +132,8 @@
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi0_default_mode>;
- pinctrl-1 = <&sdi0_sleep_mode>;
+ pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
+ pinctrl-1 = <&mc0_a_1_sleep>;
status = "okay";
};
@@ -145,8 +145,8 @@
bus-width = <4>;
non-removable;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi1_default_mode>;
- pinctrl-1 = <&sdi1_sleep_mode>;
+ pinctrl-0 = <&mc1_a_1_default>;
+ pinctrl-1 = <&mc1_a_1_sleep>;
status = "okay";
};
@@ -160,8 +160,8 @@
non-removable;
vmmc-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi2_default_mode>;
- pinctrl-1 = <&sdi2_sleep_mode>;
+ pinctrl-0 = <&mc2_a_1_default>;
+ pinctrl-1 = <&mc2_a_1_sleep>;
status = "okay";
};
@@ -175,27 +175,27 @@
non-removable;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi4_default_mode>;
- pinctrl-1 = <&sdi4_sleep_mode>;
+ pinctrl-0 = <&mc4_a_1_default>;
+ pinctrl-1 = <&mc4_a_1_sleep>;
status = "okay";
};
msp0: msp@80123000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp0_default_mode>;
+ pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
status = "okay";
};
msp1: msp@80124000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp1_default_mode>;
+ pinctrl-0 = <&msp1txrx_a_1_default>;
status = "okay";
};
msp2: msp@80117000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp2_default_mode>;
+ pinctrl-0 = <&msp2_a_1_default>;
};
msp3: msp@80125000 {
@@ -209,8 +209,8 @@
ab8500_usb {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&musb_default_mode>;
- pinctrl-1 = <&musb_sleep_mode>;
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
};
ab8500-regulators {
@@ -257,6 +257,14 @@
};
};
+ pinctrl {
+ sdi0 {
+ sdi0_default_mode: sdi0_default {
+ /* Some boards set additional settings here */
+ };
+ };
+ };
+
mcde@a0350000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&lcd_default_mode>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 566b35ac0d0c..8b80dcdf6e5b 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -156,19 +156,19 @@
msp0: msp@80123000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp0_default_mode>;
+ pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
status = "okay";
};
msp1: msp@80124000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp1_default_mode>;
+ pinctrl-0 = <&msp1txrx_a_1_default>;
status = "okay";
};
msp2: msp@80117000 {
pinctrl-names = "default";
- pinctrl-0 = <&msp2_default_mode>;
+ pinctrl-0 = <&msp2_a_1_default>;
};
msp3: msp@80125000 {
@@ -238,8 +238,8 @@
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi0_default_mode>;
- pinctrl-1 = <&sdi0_sleep_mode>;
+ pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
+ pinctrl-1 = <&mc0_a_1_sleep>;
/* GPIO218 MMC_CD */
cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
@@ -253,8 +253,8 @@
max-frequency = <100000000>;
bus-width = <4>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi1_default_mode>;
- pinctrl-1 = <&sdi1_sleep_mode>;
+ pinctrl-0 = <&mc1_a_1_default>;
+ pinctrl-1 = <&mc1_a_1_sleep>;
status = "okay";
};
@@ -263,7 +263,7 @@
sdi2_per3@80005000 {
arm,primecell-periphid = <0x10480180>;
pinctrl-names = "default";
- pinctrl-0 = <&sdi2_sleep_mode>;
+ pinctrl-0 = <&mc2_a_1_sleep>;
status = "okay";
};
@@ -276,49 +276,49 @@
cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdi4_default_mode>;
- pinctrl-1 = <&sdi4_sleep_mode>;
+ pinctrl-0 = <&mc4_a_1_default>;
+ pinctrl-1 = <&mc4_a_1_sleep>;
status = "okay";
};
uart@80120000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart0_default_mode>;
- pinctrl-1 = <&uart0_sleep_mode>;
+ pinctrl-0 = <&u0_a_1_default>;
+ pinctrl-1 = <&u0_a_1_sleep>;
status = "okay";
};
/* This UART is unused and thus left disabled */
uart@80121000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart1_default_mode>;
- pinctrl-1 = <&uart1_sleep_mode>;
+ pinctrl-0 = <&u1rxtx_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep>;
};
uart@80007000 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart2_default_mode>;
- pinctrl-1 = <&uart2_sleep_mode>;
+ pinctrl-0 = <&u2rxtx_c_1_default>;
+ pinctrl-1 = <&u2rxtx_c_1_sleep>;
status = "okay";
};
i2c@80004000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c0_default_mode>;
- pinctrl-1 = <&i2c0_sleep_mode>;
+ pinctrl-0 = <&i2c0_a_1_default>;
+ pinctrl-1 = <&i2c0_a_1_sleep>;
};
i2c@80122000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c1_default_mode>;
- pinctrl-1 = <&i2c1_sleep_mode>;
+ pinctrl-0 = <&i2c1_b_2_default>;
+ pinctrl-1 = <&i2c1_b_2_sleep>;
};
i2c@80128000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c2_default_mode>;
- pinctrl-1 = <&i2c2_sleep_mode>;
+ pinctrl-0 = <&i2c2_b_2_default>;
+ pinctrl-1 = <&i2c2_b_2_sleep>;
lsm303dlh@18 {
/* Accelerometer */
compatible = "st,lsm303dlh-accel";
@@ -367,8 +367,8 @@
i2c@80110000 {
pinctrl-names = "default","sleep";
- pinctrl-0 = <&i2c3_default_mode>;
- pinctrl-1 = <&i2c3_sleep_mode>;
+ pinctrl-0 = <&i2c3_c_2_default>;
+ pinctrl-1 = <&i2c3_c_2_sleep>;
};
spi@80002000 {
@@ -402,8 +402,8 @@
ab8500_usb {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&musb_default_mode>;
- pinctrl-1 = <&musb_sleep_mode>;
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
};
ext_regulators: ab8500-ext-regulators {
--
2.24.0
