Hi Rob and Matthias,
Gentle ping for this patch set.
Thanks.
On Tue, 2019-10-22 at 11:51 +0800, Anthony Huang wrote:
> Mediatek MMDVFS driver is used to set clk for Mediatek multimedia
> hardwares. The MMDVFS registers a regulator callback and multimedia
> hardwares set voltage by regulator API and then this callback will be
> triggered. The MMDVFS will get current opp level from opp table according
> to the voltage, and then the MMDVFS sets all the clock MUXs to the clock
> sources according to the opp level.
>
> On some platforms, both clock MUX and frequency hopping need to be used
> together. The MMDVFS supports these two clock setting methods and the
> execution sequence of them can be configured in DTS.
>
> Signed-off-by: Anthony Huang <anthony.huang@xxxxxxxxxxxx>
> ---
> drivers/soc/mediatek/Kconfig | 9 ++
> drivers/soc/mediatek/Makefile | 1 +
> drivers/soc/mediatek/mtk-mmdvfs.c | 313 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 323 insertions(+)
> create mode 100644 drivers/soc/mediatek/mtk-mmdvfs.c
>
> diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> index 2114b56..e92762b 100644
> --- a/drivers/soc/mediatek/Kconfig
> +++ b/drivers/soc/mediatek/Kconfig
> @@ -44,4 +44,13 @@ config MTK_SCPSYS
> Say yes here to add support for the MediaTek SCPSYS power domain
> driver.
>
> +config MTK_MMDVFS
> + tristate "MediaTek MMDVFS Support"
> + depends on ARCH_MEDIATEK || COMPILE_TEST
> + help
> + Say yes here to add support for the MediaTek Multimedia DVFS (MMDVFS)
> + driver. The MMDVFS is used to set clk for Mediatek multimedia hardwares
> + , such as display, camera, mdp and video codec. Say no if your device
> + does not need to do DVFS for Multimedia hardwares.
> +
> endmenu
> diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> index b017330..faf52944 100644
> --- a/drivers/soc/mediatek/Makefile
> +++ b/drivers/soc/mediatek/Makefile
> @@ -1,5 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0-only
> obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
> obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
> +obj-$(CONFIG_MTK_MMDVFS) += mtk-mmdvfs.o
> obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
> obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
> diff --git a/drivers/soc/mediatek/mtk-mmdvfs.c b/drivers/soc/mediatek/mtk-mmdvfs.c
> new file mode 100644
> index 0000000..f6e45b0
> --- /dev/null
> +++ b/drivers/soc/mediatek/mtk-mmdvfs.c
> @@ -0,0 +1,313 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 MediaTek Inc.
> + */
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_opp.h>
> +#include <linux/regulator/consumer.h>
> +
> +#define MAX_OPP_NUM (6)
> +#define MAX_MUX_NUM (10)
> +#define MAX_HOPPING_CLK_NUM (2)
> +
> +enum {
> + ACTION_DEFAULT,
> + ACTION_IHDM, /* Voltage Increase: Hopping First, Decrease: MUX First*/
> +};
> +
> +struct mmdvfs_mux_data {
> + const char *mux_name;
> + struct clk *mux;
> + struct clk *clk_src[MAX_OPP_NUM];
> +};
> +
> +struct mmdvfs_hopping_data {
> + const char *hopping_name;
> + struct clk *hopping_clk;
> + u32 hopping_rate[MAX_OPP_NUM];
> +};
> +
> +struct mmdvfs_drv_data {
> + bool need_change_voltage;
> + u32 request_voltage;
> + u32 num_muxes;
> + struct mmdvfs_mux_data muxes[MAX_MUX_NUM];
> + u32 num_hoppings;
> + struct mmdvfs_hopping_data hoppings[MAX_HOPPING_CLK_NUM];
> + u32 action;
> + struct notifier_block nb;
> + u32 voltages[MAX_OPP_NUM];
> +};
> +
> +static void set_all_muxes(struct mmdvfs_drv_data *drv_data, u32 opp_level)
> +{
> + u32 num_muxes = drv_data->num_muxes;
> + u32 i;
> + struct clk *mux, *clk_src;
> + s32 err;
> +
> + for (i = 0; i < num_muxes; i++) {
> + mux = drv_data->muxes[i].mux;
> + clk_src = drv_data->muxes[i].clk_src[opp_level];
> + err = clk_prepare_enable(mux);
> +
> + if (err) {
> + pr_notice("prepare mux(%s) fail:%d opp_level:%d\n",
> + drv_data->muxes[i].mux_name, err, opp_level);
> + continue;
> + }
> + err = clk_set_parent(mux, clk_src);
> + if (err)
> + pr_notice("set parent(%s) fail:%d opp_level:%d\n",
> + drv_data->muxes[i].mux_name, err, opp_level);
> + clk_disable_unprepare(mux);
> + }
> +}
> +
> +static void set_all_hoppings(struct mmdvfs_drv_data *drv_data, u32 opp_level)
> +{
> + u32 num_hoppings = drv_data->num_hoppings;
> + u32 i, hopping_rate;
> + struct clk *hopping;
> + s32 err;
> +
> + for (i = 0; i < num_hoppings; i++) {
> + hopping = drv_data->hoppings[i].hopping_clk;
> + hopping_rate = drv_data->hoppings[i].hopping_rate[opp_level];
> + err = clk_prepare_enable(hopping);
> +
> + if (err) {
> + pr_notice("prepare hopping(%s) fail:%d opp_level:%d\n",
> + drv_data->hoppings[i].hopping_name,
> + err, opp_level);
> + continue;
> + }
> + err = clk_set_rate(hopping, hopping_rate);
> + if (err)
> + pr_notice("set %s rate(%u) fail:%d opp_level:%d\n",
> + drv_data->hoppings[i].hopping_name,
> + hopping_rate, err, opp_level);
> + clk_disable_unprepare(hopping);
> + }
> +}
> +
> +static void set_all_clk(struct mmdvfs_drv_data *drv_data,
> + u32 voltage, bool vol_inc)
> +{
> + u32 i;
> + u32 opp_level;
> +
> + for (i = 0; i < MAX_OPP_NUM; i++) {
> + if (drv_data->voltages[i] == voltage) {
> + opp_level = i;
> + break;
> + }
> + }
> + if (i == MAX_OPP_NUM) {
> + pr_notice("voltage(%d) is not found\n", voltage);
> + return;
> + }
> +
> + switch (drv_data->action) {
> + /* Voltage Increase: Hopping First, Decrease: MUX First*/
> + case ACTION_IHDM:
> + if (vol_inc) {
> + set_all_hoppings(drv_data, opp_level);
> + set_all_muxes(drv_data, opp_level);
> + } else {
> + set_all_muxes(drv_data, opp_level);
> + set_all_hoppings(drv_data, opp_level);
> + }
> + break;
> + default:
> + set_all_muxes(drv_data, opp_level);
> + break;
> + }
> + pr_debug("set clk to opp level:%d\n", opp_level);
> +}
> +
> +static int regulator_event_notify(struct notifier_block *nb,
> + unsigned long event, void *data)
> +{
> + unsigned long uV;
> + struct mmdvfs_drv_data *drv_data;
> + struct pre_voltage_change_data *pvc_data;
> +
> + drv_data = container_of(nb, struct mmdvfs_drv_data, nb);
> +
> + if (event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) {
> + pvc_data = data;
> + uV = pvc_data->min_uV;
> +
> + if (uV < pvc_data->old_uV) {
> + set_all_clk(drv_data, uV, false);
> + drv_data->request_voltage = uV;
> + } else if (uV > pvc_data->old_uV) {
> + drv_data->need_change_voltage = true;
> + }
> + pr_debug("regulator event=PRE_VOLTAGE_CHANGE old=%lu new=%lu\n",
> + pvc_data->old_uV, pvc_data->min_uV);
> + } else if (event == REGULATOR_EVENT_VOLTAGE_CHANGE) {
> + uV = (unsigned long)data;
> + if (drv_data->need_change_voltage) {
> + set_all_clk(drv_data, uV, true);
> + drv_data->need_change_voltage = false;
> + drv_data->request_voltage = uV;
> + }
> + pr_debug("regulator event=VOLTAGE_CHANGE voltage=%lu\n", uV);
> + } else if (event == REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE) {
> + uV = (unsigned long)data;
> + /* If clk was changed, restore to previous setting */
> + if (uV != drv_data->request_voltage) {
> + set_all_clk(drv_data, uV,
> + uV > drv_data->request_voltage);
> + drv_data->need_change_voltage = false;
> + drv_data->request_voltage = uV;
> + }
> + pr_info("regulator event=ABORT_VOLTAGE_CHANGE voltage=%lu\n",
> + uV);
> + }
> + return 0;
> +}
> +
> +static const struct of_device_id of_mmdvfs_match_tbl[] = {
> + {
> + .compatible = "mediatek,mmdvfs",
> + },
> + {}
> +};
> +
> +static int mmdvfs_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct mmdvfs_drv_data *drv_data;
> + struct regulator *reg;
> + u32 num_mux = 0, num_hopping = 0;
> + u32 num_clksrc, index, hopping_rate, num_hopping_rate;
> + struct property *mux_prop, *clksrc_prop;
> + struct property *hopping_prop, *hopping_rate_prop;
> + const char *mux_name, *clksrc_name, *hopping_name;
> + char prop_name[32];
> + const __be32 *p;
> + s32 ret;
> + unsigned long freq;
> + struct dev_pm_opp *opp;
> +
> + drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
> + if (!drv_data)
> + return -ENOMEM;
> +
> + of_property_for_each_string(dev->of_node, "mediatek,support_mux",
> + mux_prop, mux_name) {
> + if (num_mux >= MAX_MUX_NUM) {
> + pr_notice("Too many items in support_mux\n");
> + return -EINVAL;
> + }
> + drv_data->muxes[num_mux].mux = devm_clk_get(dev, mux_name);
> + drv_data->muxes[num_mux].mux_name = mux_name;
> + snprintf(prop_name, sizeof(prop_name) - 1,
> + "mediatek,mux_%s", mux_name);
> + num_clksrc = 0;
> + of_property_for_each_string(dev->of_node, prop_name,
> + clksrc_prop, clksrc_name) {
> + if (num_clksrc >= MAX_OPP_NUM) {
> + pr_notice("Too many items in %s\n", prop_name);
> + return -EINVAL;
> + }
> + drv_data->muxes[num_mux].clk_src[num_clksrc] =
> + devm_clk_get(dev, clksrc_name);
> + num_clksrc++;
> + }
> + num_mux++;
> + }
> + drv_data->num_muxes = num_mux;
> +
> + of_property_for_each_string(dev->of_node, "mediatek,support_hopping",
> + hopping_prop, hopping_name) {
> + if (num_hopping >= MAX_HOPPING_CLK_NUM) {
> + pr_notice("Too many items in support_hopping\n");
> + return -EINVAL;
> + }
> + drv_data->hoppings[num_hopping].hopping_clk =
> + devm_clk_get(dev, hopping_name);
> + drv_data->hoppings[num_hopping].hopping_name = hopping_name;
> + snprintf(prop_name, sizeof(prop_name) - 1,
> + "mediatek,hopping_%s", hopping_name);
> + num_hopping_rate = 0;
> + of_property_for_each_u32(dev->of_node, prop_name,
> + hopping_rate_prop, p, hopping_rate) {
> + if (num_hopping_rate >= MAX_OPP_NUM) {
> + pr_notice("Too many items in %s\n", prop_name);
> + return -EINVAL;
> + }
> + drv_data->hoppings[num_hopping].hopping_rate
> + [num_hopping_rate] = hopping_rate;
> + num_hopping_rate++;
> + }
> + num_hopping++;
> + }
> + drv_data->num_hoppings = num_hopping;
> +
> + of_property_read_u32(dev->of_node,
> + "mediatek,action", &drv_data->action);
> +
> + /* Get voltage info from opp table */
> + dev_pm_opp_of_add_table(dev);
> + freq = 0;
> + index = 0;
> + while (!IS_ERR(opp = dev_pm_opp_find_freq_ceil(dev, &freq))) {
> + drv_data->voltages[index] = dev_pm_opp_get_voltage(opp);
> + freq++;
> + index++;
> + dev_pm_opp_put(opp);
> + }
> +
> + reg = devm_regulator_get(dev, "dvfsrc-vcore");
> + if (IS_ERR(reg))
> + return PTR_ERR(reg);
> +
> + drv_data->nb.notifier_call = regulator_event_notify;
> + ret = devm_regulator_register_notifier(reg, &drv_data->nb);
> + if (ret)
> + pr_notice("Failed to register notifier: %d\n", ret);
> +
> + return ret;
> +}
> +
> +static struct platform_driver mmdvfs_drv = {
> + .probe = mmdvfs_probe,
> + .driver = {
> + .name = "mtk-mmdvfs",
> + .owner = THIS_MODULE,
> + .of_match_table = of_mmdvfs_match_tbl,
> + },
> +};
> +
> +static int __init mtk_mmdvfs_init(void)
> +{
> + s32 status;
> +
> + status = platform_driver_register(&mmdvfs_drv);
> + if (status) {
> + pr_notice("Failed to register MMDVFS driver(%d)\n", status);
> + return -ENODEV;
> + }
> + return 0;
> +}
> +
> +static void __exit mtk_mmdvfs_exit(void)
> +{
> + platform_driver_unregister(&mmdvfs_drv);
> +}
> +
> +module_init(mtk_mmdvfs_init);
> +module_exit(mtk_mmdvfs_exit);
> +
> +MODULE_DESCRIPTION("MTK MMDVFS driver");
> +MODULE_AUTHOR("Anthony Huang<anthony.huang@xxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
