Hi Boris,
Thank you for the patch.
On Wed, Oct 23, 2019 at 05:44:52PM +0200, Boris Brezillon wrote:
> Encoder drivers will progressively transition to the drm_bridge
> interface in place of the drm_encoder one.
>
> Let's start with the VC4 driver, and use the ->pre_{enable,disable}()
> hooks to get rid of the hack resetting encoder->bridge.next (which was
> needed to control the encoder/bridge enable/disable sequence).
>
> Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
> ---
> Changes in v3:
> * Embed a drm_bridge object in vc4_dsi since drm_encoder no longer has
> a dummy bridge
>
> Changes in v2:
> * New patch (replaces "drm/vc4: Get rid of the dsi->bridge field")
> ---
> drivers/gpu/drm/vc4/vc4_dsi.c | 88 +++++++++++++++++++++--------------
> 1 file changed, 52 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
> index c9ba83ed49b9..49f8a313e759 100644
> --- a/drivers/gpu/drm/vc4/vc4_dsi.c
> +++ b/drivers/gpu/drm/vc4/vc4_dsi.c
> @@ -498,7 +498,11 @@ struct vc4_dsi {
>
> struct mipi_dsi_host dsi_host;
> struct drm_encoder *encoder;
> - struct drm_bridge *bridge;
> +
> + /* Embed a bridge object so we can implement bridge funcs instead of
> + * encoder ones.
> + */
> + struct drm_bridge bridge;
>
> void __iomem *regs;
>
> @@ -543,6 +547,11 @@ struct vc4_dsi {
> struct debugfs_regset32 regset;
> };
>
> +static inline struct vc4_dsi *bridge_to_vc4_dsi(struct drm_bridge *bridge)
> +{
> + return container_of(bridge, struct vc4_dsi, bridge);
> +}
> +
> #define host_to_dsi(host) container_of(host, struct vc4_dsi, dsi_host)
>
> static inline void
> @@ -747,16 +756,11 @@ dsi_esc_timing(u32 ns)
> return DIV_ROUND_UP(ns, ESC_TIME_NS);
> }
>
> -static void vc4_dsi_encoder_disable(struct drm_encoder *encoder)
> +static void vc4_dsi_bridge_post_disable(struct drm_bridge *bridge)
> {
> - struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder);
> - struct vc4_dsi *dsi = vc4_encoder->dsi;
> + struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
> struct device *dev = &dsi->pdev->dev;
>
> - drm_bridge_disable(dsi->bridge);
> - vc4_dsi_ulps(dsi, true);
> - drm_bridge_post_disable(dsi->bridge);
> -
> clk_disable_unprepare(dsi->pll_phy_clock);
> clk_disable_unprepare(dsi->escape_clock);
> clk_disable_unprepare(dsi->pixel_clock);
> @@ -764,6 +768,13 @@ static void vc4_dsi_encoder_disable(struct drm_encoder *encoder)
> pm_runtime_put(dev);
> }
>
> +static void vc4_dsi_bridge_disable(struct drm_bridge *bridge)
> +{
> + struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
> +
> + vc4_dsi_ulps(dsi, true);
> +}
> +
> /* Extends the mode's blank intervals to handle BCM2835's integer-only
> * DSI PLL divider.
> *
> @@ -777,12 +788,11 @@ static void vc4_dsi_encoder_disable(struct drm_encoder *encoder)
> * higher-than-expected clock rate to the panel, but that's what the
> * firmware does too.
> */
> -static bool vc4_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
> - const struct drm_display_mode *mode,
> - struct drm_display_mode *adjusted_mode)
> +static bool vc4_dsi_bridge_mode_fixup(struct drm_bridge *bridge,
> + const struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> {
> - struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder);
> - struct vc4_dsi *dsi = vc4_encoder->dsi;
> + struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
> struct clk *phy_parent = clk_get_parent(dsi->pll_phy_clock);
> unsigned long parent_rate = clk_get_rate(phy_parent);
> unsigned long pixel_clock_hz = mode->clock * 1000;
> @@ -816,11 +826,11 @@ static bool vc4_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
> return true;
> }
>
> -static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
> +static void vc4_dsi_bridge_pre_enable(struct drm_bridge *bridge)
> {
> + struct drm_encoder *encoder = bridge->encoder;
> struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
> - struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder);
> - struct vc4_dsi *dsi = vc4_encoder->dsi;
> + struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
> struct device *dev = &dsi->pdev->dev;
> bool debug_dump_regs = false;
> unsigned long hs_clock;
> @@ -1054,8 +1064,12 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
> }
>
> vc4_dsi_ulps(dsi, false);
> +}
>
> - drm_bridge_pre_enable(dsi->bridge);
If I'm not mistaken this switches the order of the DSI's encoder
pre-enable and the next bridge's pre-enable. I think it's true for
post-disable too. It may not be a problem, but have this been tested ?
> +static void vc4_dsi_bridge_enable(struct drm_bridge *bridge)
> +{
> + struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge);
> + bool debug_dump_regs = false;
>
> if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
> DSI_PORT_WRITE(DISP0_CTRL,
> @@ -1072,8 +1086,6 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
> DSI_DISP0_ENABLE);
> }
>
> - drm_bridge_enable(dsi->bridge);
> -
> if (debug_dump_regs) {
> struct drm_printer p = drm_info_printer(&dsi->pdev->dev);
> dev_info(&dsi->pdev->dev, "DSI regs after:\n");
> @@ -1290,10 +1302,12 @@ static const struct mipi_dsi_host_ops vc4_dsi_host_ops = {
> .transfer = vc4_dsi_host_transfer,
> };
>
> -static const struct drm_encoder_helper_funcs vc4_dsi_encoder_helper_funcs = {
> - .disable = vc4_dsi_encoder_disable,
> - .enable = vc4_dsi_encoder_enable,
> - .mode_fixup = vc4_dsi_encoder_mode_fixup,
> +static const struct drm_bridge_funcs vc4_dsi_bridge_funcs = {
> + .pre_enable = vc4_dsi_bridge_pre_enable,
> + .enable = vc4_dsi_bridge_enable,
> + .disable = vc4_dsi_bridge_disable,
> + .post_disable = vc4_dsi_bridge_post_disable,
> + .mode_fixup = vc4_dsi_bridge_mode_fixup,
> };
>
> static const struct of_device_id vc4_dsi_dt_match[] = {
> @@ -1445,6 +1459,7 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
> struct vc4_dev *vc4 = to_vc4_dev(drm);
> struct vc4_dsi *dsi = dev_get_drvdata(dev);
> struct vc4_dsi_encoder *vc4_dsi_encoder;
> + struct drm_bridge *next_bridge;
> struct drm_panel *panel;
> const struct of_device_id *match;
> dma_cap_mask_t dma_mask;
> @@ -1561,7 +1576,7 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
> }
>
> ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> - &panel, &dsi->bridge);
> + &panel, &next_bridge);
> if (ret) {
> /* If the bridge or panel pointed by dev->of_node is not
> * enabled, just return 0 here so that we don't prevent the DRM
> @@ -1576,10 +1591,10 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
> }
>
> if (panel) {
> - dsi->bridge = devm_drm_panel_bridge_add_typed(dev, panel,
> + next_bridge = devm_drm_panel_bridge_add_typed(dev, panel,
> DRM_MODE_CONNECTOR_DSI);
> - if (IS_ERR(dsi->bridge))
> - return PTR_ERR(dsi->bridge);
> + if (IS_ERR(next_bridge))
> + return PTR_ERR(next_bridge);
> }
>
> /* The esc clock rate is supposed to always be 100Mhz. */
> @@ -1598,19 +1613,20 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
>
> drm_encoder_init(drm, dsi->encoder, &vc4_dsi_encoder_funcs,
> DRM_MODE_ENCODER_DSI, NULL);
> - drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs);
>
> - ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
> + /* Declare ourself as the first bridge element. */
> + dsi->bridge.funcs = &vc4_dsi_bridge_funcs;
> + ret = drm_bridge_attach(dsi->encoder, &dsi->bridge, NULL);
> + if (ret) {
> + dev_err(dev, "bridge attach failed: %d\n", ret);
> + return ret;
> + }
> +
> + ret = drm_bridge_attach(dsi->encoder, next_bridge, &dsi->bridge);
> if (ret) {
> dev_err(dev, "bridge attach failed: %d\n", ret);
> return ret;
> }
This is usually done in the bridge attach operation. As we're in control
we can attach the next bridge here, but I think the driver would look
more standard if you moved the second attach call to this bridge's
attach operation.
With this fixed, and if the driver has been tested and the
enable/disable order change doesn't cause issues,
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> - /* Disable the atomic helper calls into the bridge. We
> - * manually call the bridge pre_enable / enable / etc. calls
> - * from our driver, since we need to sequence them within the
> - * encoder's enable/disable paths.
> - */
> - dsi->encoder->bridge = NULL;
>
> if (dsi->port == 0)
> vc4_debugfs_add_regset32(drm, "dsi0_regs", &dsi->regset);
> @@ -1629,7 +1645,7 @@ static void vc4_dsi_unbind(struct device *dev, struct device *master,
> struct vc4_dev *vc4 = to_vc4_dev(drm);
> struct vc4_dsi *dsi = dev_get_drvdata(dev);
>
> - if (dsi->bridge)
> + if (dsi->bridge.next)
> pm_runtime_disable(dev);
>
> vc4_dsi_encoder_destroy(dsi->encoder);
--
Regards,
Laurent Pinchart
