>From 9a17872b5faf2c00ab0b572bac0072e44a3d8b91 Mon Sep 17 00:00:00 2001
From: manikandan-e <manikandan.hcl.ers.epl@xxxxxxxxx>
Date: Thu, 21 Nov 2019 11:57:07 +0530
Subject: [PATCH] ARM: dts: aspeed: Adding Facebook Yosemite V2 BMC
The Yosemite V2 is a facebook multi-node server
platform that host four OCP server. The BMC
in the Yosemite V2 platorm based on AST2500 SoC.
This patch adds linux device tree entry related to
Yosemite V2 specific devices connected to BMC SoC.
Signed-off-by: manikandan-e <manikandan.hcl.ers.epl@xxxxxxxxx>
---
.../boot/dts/aspeed-bmc-facebook-yosemitev2.dts | 152 +++++++++++++++++++++
1 file changed, 152 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
new file mode 100644
index 0000000..5f9a2e1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Facebook Yosemitev2 BMC";
+ compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
+ aliases {
+ serial0 = &uart1;
+ serial4 = &uart5;
+ };
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ iio-hwmon {
+ // VOLATAGE SENSOR
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0> , <&adc 1> , <&adc 2> , <&adc 3> ,
+ <&adc 4> , <&adc 5> , <&adc 6> , <&adc 7> ,
+ <&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
+ <&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart5 {
+ // BMC Console
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
+
+&i2c8 {
+ status = "okay";
+ //FRU EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+ tmp421@4e {
+ //INLET TEMP
+ compatible = "ti,tmp421";
+ reg = <0x4e>;
+ };
+ //OUTLET TEMP
+ tmp421@4f {
+ compatible = "ti,tmp421";
+ reg = <0x4f>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+ //HSC
+ adm1278@40 {
+ compatible = "adi,adm1278";
+ reg = <0x40>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+ //MEZZ_TEMP_SENSOR
+ tmp421@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ //MEZZ_FRU
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+};
+
+&pwm_tacho {
+ status = "okay";
+ //FSC
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+};
--
2.7.4
On Fri, Nov 22, 2019 at 09:16:39AM +1030, Andrew Jeffery wrote:
>
>
> On Thu, 21 Nov 2019, at 18:18, Manikandan wrote:
> >
> > Hi Andrew/Vijay,
> >
> > Thanks for the review .
> >
> > The following changes done in dts and tested in Facebook Yosemite V2
> > BMC platform,
> > 1. LPC feature removed as not supported .
> > 2. VUART feature removed as not supported.
> > 3. Host UART feature removed as not in the current scope.
> > 4. ADC pinctrl details added in dts.
>
> Can you please re-send the patch as a v2 and inline to the mail rather than
> as an attachment?
>
> Cheers,
>
> Andrew
