From: Damir Franusic <damir.franusic@xxxxxxxxxx>
Add missing nodes and properties to enable SMP
support on IPQ40xx devices.
Booting without "saw_l2" node:
[ 0.001400] CPU: Testing write buffer coherency: ok
[ 0.001856] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.060163] Setting up static identity map for 0x80300000 - 0x80300060
[ 0.080140] rcu: Hierarchical SRCU implementation.
[ 0.120258] smp: Bringing up secondary CPUs ...
[ 0.200540] CPU1: failed to boot: -19
[ 0.280689] CPU2: failed to boot: -19
[ 0.360874] CPU3: failed to boot: -19
[ 0.360966] smp: Brought up 1 node, 1 CPU
[ 0.360979] SMP: Total of 1 processors activated (96.00 BogoMIPS).
[ 0.360988] CPU: All CPU(s) started in SVC mode.
Then, booting with "saw_l2" node present (this patch applied):
[ 0.001450] CPU: Testing write buffer coherency: ok
[ 0.001904] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.060161] Setting up static identity map for 0x80300000 - 0x80300060
[ 0.080137] rcu: Hierarchical SRCU implementation.
[ 0.120252] smp: Bringing up secondary CPUs ...
[ 0.200958] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.281091] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.361264] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.361430] smp: Brought up 1 node, 4 CPUs
[ 0.361460] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[ 0.361469] CPU: All CPU(s) started in SVC mode.
Signed-off-by: Damir Franusic <damir.franusic@xxxxxxxxxx>
Cc: Luka Perkov <luka.perkov@xxxxxxxxxx>
Cc: Robert Marko <robert.marko@xxxxxxxxxx>
Cc: Andy Gross <agross@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: linux-arm-msm@xxxxxxxxxxxxxxx
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 56f51599852d..72d4e290b543 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -102,6 +102,7 @@
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
+ qcom,saw = <&saw_l2>;
};
};
@@ -341,6 +342,12 @@
regulator;
};
+ saw_l2: regulator@b012000 {
+ compatible = "qcom,saw2";
+ reg = <0xb012000 0x1000>;
+ regulator;
+ };
+
blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78af000 0x200>;
--
2.23.0
