On 21. 11. 19 9:51, Manish Narani wrote: > Add the new compatible string for ZynqMP SD Host Controller for its use > in the Arasan SDHCI driver for some of the ZynqMP specific operations. > Add required properties for the same. > > Signed-off-by: Manish Narani <manish.narani@xxxxxxxxxx> > --- > This patch depends on the below series of patches: > https://lkml.org/lkml/2019/11/20/366 > > Changes in v2: > - Added clock-names for SD card clocks for getting clocks in the driver > > Changes in v3: > - Reverted "Added clock-names for SD card clocks for getting clocks in the driver" > > Changes in v4: > - Removed extra compatible property from v3 > --- > arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi > index 9aa67340a4d8..de09ebe608e1 100644 > --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi > +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi > @@ -493,21 +493,25 @@ > }; > > sdhci0: mmc@ff160000 { > - compatible = "arasan,sdhci-8.9a"; > + compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; > status = "disabled"; > interrupt-parent = <&gic>; > interrupts = <0 48 4>; > reg = <0x0 0xff160000 0x0 0x1000>; > clock-names = "clk_xin", "clk_ahb"; > + #clock-cells = <1>; > + clock-output-names = "clk_out_sd0", "clk_in_sd0"; > }; > > sdhci1: mmc@ff170000 { > - compatible = "arasan,sdhci-8.9a"; > + compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; > status = "disabled"; > interrupt-parent = <&gic>; > interrupts = <0 49 4>; > reg = <0x0 0xff170000 0x0 0x1000>; > clock-names = "clk_xin", "clk_ahb"; > + #clock-cells = <1>; > + clock-output-names = "clk_out_sd1", "clk_in_sd1"; > }; > > smmu: smmu@fd800000 { > Better now. Applied. Thanks, Michal
