[PATCH v1 08/12] soc: mediatek: cmdq: add read_s function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add read_s function in cmdq helper functions which support read value from
register or dma physical address into gce internal register.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@xxxxxxxxxxxx>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   |   24 ++++++++++++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h |    1 +
 include/linux/soc/mediatek/mtk-cmdq.h    |   10 ++++++++++
 3 files changed, 35 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 1b074a9..4c90fed 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -23,6 +23,10 @@ struct cmdq_instruction {
 	union {
 		u32 value;
 		u32 mask;
+		struct {
+			u16 arg_c;
+			u16 arg_b;
+		};
 	};
 	union {
 		u16 offset;
@@ -227,6 +231,26 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
 }
 EXPORT_SYMBOL(cmdq_pkt_write_mask);
 
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, phys_addr_t addr, u16 reg_idx)
+{
+	struct cmdq_instruction inst = { {0} };
+	int err;
+	const u16 src_reg_idx = CMDQ_SPR_TEMP;
+
+	err = cmdq_pkt_assign(pkt, src_reg_idx, CMDQ_ADDR_HIGH(addr));
+	if (err < 0)
+		return err;
+
+	inst.op = CMDQ_CODE_READ_S;
+	inst.arg_a_t = CMDQ_REG_TYPE;
+	inst.sop = src_reg_idx;
+	inst.reg_dst = reg_idx;
+	inst.arg_b = CMDQ_ADDR_LOW(addr);
+
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_read_s);
+
 int cmdq_pkt_write_s(struct cmdq_pkt *pkt, dma_addr_t addr,
 		     u32 value, u32 mask)
 {
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 8ef87e1..3f6bc0d 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -59,6 +59,7 @@ enum cmdq_code {
 	CMDQ_CODE_JUMP = 0x10,
 	CMDQ_CODE_WFE = 0x20,
 	CMDQ_CODE_EOC = 0x40,
+	CMDQ_CODE_READ_S = 0x80,
 	CMDQ_CODE_WRITE_S = 0x90,
 	CMDQ_CODE_WRITE_S_MASK = 0x91,
 	CMDQ_CODE_LOGIC = 0xa0,
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 8dbd046..fb48d3c 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -104,6 +104,16 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
 			u16 offset, u32 value, u32 mask);
 
 /**
+ * cmdq_pkt_read_s() - append read_s command to the CMDQ packet
+ * @pkt:	the CMDQ packet
+ * @addr:	the physical address of register or dma to read
+ * @reg_idx:	the CMDQ internal register ID to cache read data
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_read_s(struct cmdq_pkt *pkt, phys_addr_t addr, u16 reg_idx);
+
+/**
  * cmdq_pkt_write_s() - append write_s command with mask to the CMDQ packet
  * @pkt:	the CMDQ packet
  * @addr:	the physical address of register or dma
-- 
1.7.9.5




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux