The patch ASoC: dt-bindings: pcm3168a: Update the optional RST gpio for clarity has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 103e5d734ae28fc1ccd80d1df9d33f44536d74a4 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi <peter.ujfalusi@xxxxxx> Date: Wed, 20 Nov 2019 15:17:52 +0200 Subject: [PATCH] ASoC: dt-bindings: pcm3168a: Update the optional RST gpio for clarity Use the standard name for the gpion in DT: reset-gpios Document that the RST line is low active and update the example accordingly. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> Link: https://lore.kernel.org/r/20191120131753.6831-2-peter.ujfalusi@xxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- Documentation/devicetree/bindings/sound/ti,pcm3168a.txt | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt b/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt index f30aebc7603a..a02ecaab5183 100644 --- a/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt +++ b/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt @@ -27,9 +27,10 @@ For required properties on SPI/I2C, consult SPI/I2C device tree documentation Optional properties: - - rst-gpios : Optional RST gpio line for the codec - RST = low: device power-down - RST = high: device is enabled + - reset-gpios : Optional reset gpio line connected to RST pin of the codec. + The RST line is low active: + RST = low: device power-down + RST = high: device is enabled Examples: @@ -40,7 +41,7 @@ i2c0: i2c0@0 { pcm3168a: audio-codec@44 { compatible = "ti,pcm3168a"; reg = <0x44>; - rst-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; clocks = <&clk_core CLK_AUDIO>; clock-names = "scki"; VDD1-supply = <&supply3v3>; -- 2.20.1
