> -----Original Message----- > From: Davis, Andrew > Sent: Tuesday, November 19, 2019 2:41 PM > To: Robey, Caleb; linux-omap@xxxxxxxxxxxxxxx > Cc: Jason Kridner; Vutla, Lokesh; Kridner, Jason; Rizvi, Mohammad Faiz > Abbas; Dannenberg, Andreas; Hiblot, Jean-Jacques; Bajjuri, Praneeth; > Strashko, Grygorii; Tom Rini; Rob Herring; Mark Rutland; Benoît Cousson; > Tony Lindgren; devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx > Subject: Re: [PATCH 0/1] ARM: dts: am5729: beaglebone-ai: enable board > > On 11/19/19 3:28 PM, Caleb Robey wrote: > > The following patch adds the device tree file for BeagleBone AI > > > > > Cover-letter for a single patch is probably not needed, especially when > you don't add anything useful in the cover letter. > > Andrew Okay, thank you for letting me know - I will keep that in mind in the future. Caleb > > > > Caleb Robey (1): > > ARM: dts: am5729: beaglebone-ai: adding device tree > > > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/am5729-beagleboneai.dts | 782 > ++++++++++++++++++++++ > > 2 files changed, 783 insertions(+) > > create mode 100644 arch/arm/boot/dts/am5729-beagleboneai.dts > >
