[PATCH v2 0/3] Raspberry Pi 4 HWRNG Support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch series enables support for the HWRNG included on the Raspberry
Pi 4.  It is simply a rebase of Stefan's branch [1]. I went ahead and
tested this out on a Pi 4.  Prior to this patch series, attempting to use
the hwrng gives:

    $ head -c 2 /dev/hwrng
    head: /dev/hwrng: Input/output error

After this series, the same command gives two random bytes.

Changes in v2:
- specify the correct size for the region in the dts, refactor bcm283x rng

---

Stefan Wahren (2):
  dt-bindings: rng: add BCM2711 RNG compatible
  hwrng: iproc-rng200: Add support for BCM2711

Stephen Brennan (1):
  ARM: dts: bcm2711: Enable HWRNG support

 .../devicetree/bindings/rng/brcm,iproc-rng200.txt     |  1 +
 arch/arm/boot/dts/bcm2711.dtsi                        |  6 +++---
 arch/arm/boot/dts/bcm2835.dtsi                        |  1 +
 arch/arm/boot/dts/bcm2836.dtsi                        |  1 +
 arch/arm/boot/dts/bcm2837.dtsi                        |  1 +
 arch/arm/boot/dts/bcm283x-common.dtsi                 | 11 +++++++++++
 arch/arm/boot/dts/bcm283x.dtsi                        |  6 ------
 drivers/char/hw_random/Kconfig                        |  2 +-
 drivers/char/hw_random/iproc-rng200.c                 |  1 +
 9 files changed, 20 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/boot/dts/bcm283x-common.dtsi

-- 
2.24.0







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux