The patch ASoC: pcm3168a: Document optional RST gpio has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From cdacc761dae1cbd6475ac79f0e732f2b1ca021e0 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi <peter.ujfalusi@xxxxxx> Date: Wed, 13 Nov 2019 14:47:33 +0200 Subject: [PATCH] ASoC: pcm3168a: Document optional RST gpio On boards where the RST line is not pulled up, but it is connected to a GPIO line this property must present in order to be able to enable the codec. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> Link: https://lore.kernel.org/r/20191113124734.27984-2-peter.ujfalusi@xxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- Documentation/devicetree/bindings/sound/ti,pcm3168a.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt b/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt index 5d9cb84c661d..f30aebc7603a 100644 --- a/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt +++ b/Documentation/devicetree/bindings/sound/ti,pcm3168a.txt @@ -25,6 +25,12 @@ Required properties: For required properties on SPI/I2C, consult SPI/I2C device tree documentation +Optional properties: + + - rst-gpios : Optional RST gpio line for the codec + RST = low: device power-down + RST = high: device is enabled + Examples: i2c0: i2c0@0 { @@ -34,6 +40,7 @@ i2c0: i2c0@0 { pcm3168a: audio-codec@44 { compatible = "ti,pcm3168a"; reg = <0x44>; + rst-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; clocks = <&clk_core CLK_AUDIO>; clock-names = "scki"; VDD1-supply = <&supply3v3>; -- 2.20.1
