Re: [PATCH v3 0/2] add the DDR clock controller on Meson8 and Meson8b

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun 17 Nov 2019 at 15:07, Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> wrote:

> Meson8 and Meson8b SoCs embed a DDR clock controller in their MMCBUS
> registers. This series:
> - adds support for this DDR clock controller (patches 0 and 1)
> - wires up the DDR PLL as input for two audio clocks (patches 2 and 3)
> - adds the DDR clock controller to meson8.dtsi and meson8b.dtsi
>
> Special thanks go out to Alexandre Mergnat for switching the Amlogic
> clock drivers over to parent_hws and parent_data. That made this series
> a lot easier for me!
>
> This series depends on v3 my other series from [0]:
> "provide the XTAL clock via OF on Meson8/8b/8m2"
>
>
> Changes since v2 at [2]:
> - add #include <linux/clk-provider.h> as suggested by Stephen Boyd
> - drop unused includes
> - use devm_platform_ioremap_resource instead of open-coding it as
>   suggested by Stephen Boyd
> - drop trailing comma after sentinel element as suggested by Stephen
>   Boyd
> - dropped patch #3 "clk: meson: meson8b: use of_clk_hw_register to
>   register the clocks" because it's now moved to my other series at
>   [0]
> - dropped dts changes so this series exclusively targets clk-meson
>
> Changes since v1 at [1]:
> - fixed the license of the .yaml binding and added Rob's Reviewed-by
> - drop unused syscon.h include (spotted by Jerome - thanks)
> - drop fast_io from regmap_config and add max_register as suggested
>   by Jerome
> - dropped original patch #4 "clk: meson: meson8b: add the ddr_pll
>   input for the audio clocks" because I could not test that yet (that
>   patch was a forward-port from Amlogic's 3.10 BSP kernel)
>
>
> [0] https://patchwork.kernel.org/cover/11248377/
> [1] https://patchwork.kernel.org/cover/11155553/
> [2] https://patchwork.kernel.org/cover/11214227/
>
>
> Martin Blumenstingl (2):
>   dt-bindings: clock: add the Amlogic Meson8 DDR clock controller
>     binding
>   clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller
>
>  .../clock/amlogic,meson8-ddr-clkc.yaml        |  50 ++++++
>  drivers/clk/meson/Makefile                    |   2 +-
>  drivers/clk/meson/meson8-ddr.c                | 149 ++++++++++++++++++
>  include/dt-bindings/clock/meson8-ddr-clkc.h   |   4 +
>  4 files changed, 204 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
>  create mode 100644 drivers/clk/meson/meson8-ddr.c
>  create mode 100644 include/dt-bindings/clock/meson8-ddr-clkc.h

Applied for v5.6
Please note this will get rebased once v5.5-rc1 is out




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux