Hi Marc,
Am 17.11.19 um 11:47 schrieb Marc Zyngier:
> On Sun, 17 Nov 2019 08:21:04 +0100
> Andreas Färber <afaerber@xxxxxxx> wrote:
>> Add Device Trees for Realtek RTD1195 SoC and MeLE X1000 TV box.
>>
>> Reuse the existing RTD1295 watchdog compatible for now.
>>
>> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>> [AF: Fixed r-bus size, fixed GIC CPU mask, updated memreserve]
>> Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
>> ---
>> v2 -> v3:
>> * Fixed r-bus size in /soc ranges from 0x1000000 to 0x70000 (James)
>> * Adjusted /memreserve/ to close gap from 0xa800 to 0xc000 for full 0x100000
>> * Changed arch timer from GIC_CPU_MASK_RAW(0xf) to GIC_CPU_MASK_SIMPLE(2)
>> squashed from RTD1395 v1 series
>>
>> v1 -> v2:
>> * Dropped /memreserve/ and reserved-memory nodes for peripherals and NOR (Rob)
>> * Carved them out from memory reg instead (Rob)
>> * Converted some /memreserve/s to reserved-memory nodes
>>
>> arch/arm/boot/dts/Makefile | 2 +
>> arch/arm/boot/dts/rtd1195-mele-x1000.dts | 31 ++++++++
>> arch/arm/boot/dts/rtd1195.dtsi | 127 +++++++++++++++++++++++++++++++
>> 3 files changed, 160 insertions(+)
>> create mode 100644 arch/arm/boot/dts/rtd1195-mele-x1000.dts
>> create mode 100644 arch/arm/boot/dts/rtd1195.dtsi
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 08011dc8c7a6..4853a13c8cf2 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -865,6 +865,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>> dtb-$(CONFIG_ARCH_RDA) += \
>> rda8810pl-orangepi-2g-iot.dtb \
>> rda8810pl-orangepi-i96.dtb
>> +dtb-$(CONFIG_ARCH_REALTEK) += \
>> + rtd1195-mele-x1000.dtb
>> dtb-$(CONFIG_ARCH_REALVIEW) += \
>> arm-realview-pb1176.dtb \
>> arm-realview-pb11mp.dtb \
>> diff --git a/arch/arm/boot/dts/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
>> new file mode 100644
>> index 000000000000..834b430e6250
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
>> @@ -0,0 +1,31 @@
>> +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
>> +/*
>> + * Copyright (c) 2017-2019 Andreas Färber
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "rtd1195.dtsi"
>> +
>> +/ {
>> + compatible = "mele,x1000", "realtek,rtd1195";
>> + model = "MeLE X1000";
>> +
>> + aliases {
>> + serial0 = &uart0;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + memory@0 {
>> + device_type = "memory";
>> + reg = <0x0 0x18000000>,
>> + <0x19100000 0x26f00000>;
>> + };
>> +};
>> +
>> +&uart0 {
>> + status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
>> new file mode 100644
>> index 000000000000..4e3866fe8f6e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/rtd1195.dtsi
>> @@ -0,0 +1,127 @@
>> +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
>> +/*
>> + * Copyright (c) 2017-2019 Andreas Färber
>> + */
>> +
>> +/memreserve/ 0x00000000 0x0000a800; /* boot code */
>> +/memreserve/ 0x0000a800 0x000f5800;
>> +/memreserve/ 0x17fff000 0x00001000;
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> + compatible = "realtek,rtd1195";
>> + interrupt-parent = <&gic>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + cpu0: cpu@0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0x0>;
>> + clock-frequency = <1000000000>;
>> + };
>> +
>> + cpu1: cpu@1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0x1>;
>> + clock-frequency = <1000000000>;
>> + };
>> + };
>> +
>> + reserved-memory {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + rpc_comm: rpc@b000 {
>> + reg = <0x0000b000 0x1000>;
>> + };
>> +
>> + audio@1b00000 {
>> + reg = <0x01b00000 0x400000>;
>> + };
>> +
>> + rpc_ringbuf: rpc@1ffe000 {
>> + reg = <0x01ffe000 0x4000>;
>> + };
>> +
>> + secure@10000000 {
>> + reg = <0x10000000 0x100000>;
>> + no-map;
>> + };
>> + };
>> +
>> + arm-pmu {
>> + compatible = "arm,cortex-a7-pmu";
>> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-affinity = <&cpu0>, <&cpu1>;
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv7-timer";
>> + interrupts = <GIC_PPI 13
>> + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 14
>> + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 11
>> + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 10
>> + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
>> + clock-frequency = <27000000>;
>
> This is 2019, and yet it feels like 2011. This should be setup in the
> bootloader, not in DT...
What exactly - the whole node, the GIC CPU mask, the clock-frequency?
Please compare previous submissions: It's a v2012.07 based downstream
U-Boot that I don't have GPL sources of. It doesn't even fill in the
/memory@0 node.
>> + };
>> +
>> + osc27M: osc {
>> + compatible = "fixed-clock";
>> + clock-frequency = <27000000>;
>> + #clock-cells = <0>;
>> + clock-output-names = "osc27M";
>> + };
>> +
>> + soc {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0x18000000 0x18000000 0x00070000>,
>> + <0x18100000 0x18100000 0x01000000>,
>> + <0x40000000 0x40000000 0xc0000000>;
>> +
>> + wdt: watchdog@18007680 {
>> + compatible = "realtek,rtd1295-watchdog";
>> + reg = <0x18007680 0x100>;
>> + clocks = <&osc27M>;
>> + };
>> +
>> + uart0: serial@18007800 {
>> + compatible = "snps,dw-apb-uart";
>> + reg = <0x18007800 0x400>;
>> + reg-shift = <2>;
>> + reg-io-width = <4>;
>> + clock-frequency = <27000000>;
>> + status = "disabled";
>> + };
>> +
>> + uart1: serial@1801b200 {
>> + compatible = "snps,dw-apb-uart";
>> + reg = <0x1801b200 0x100>;
>> + reg-shift = <2>;
>> + reg-io-width = <4>;
>> + clock-frequency = <27000000>;
>> + status = "disabled";
>> + };
>> +
>> + gic: interrupt-controller@ff011000 {
>> + compatible = "arm,cortex-a7-gic";
>> + reg = <0xff011000 0x1000>,
>> + <0xff012000 0x2000>;
>> + interrupt-controller;
>> + #interrupt-cells = <3>;
>
> You know what I'm going to say: GICH and GI[C]V are missing, as well as
> the maintenance interrupt. This is all bog-standard HW (most probably a
> GIC400), so there is no reason for this information not to be present.
Yes, and if you look at my rtd1295-next branch referenced in the cover
letter, you will find that I do have follow-up patches adding GICH and
GICV, also a guess for the GICV interrupt, and in a different patch [1]
I have specifically reminded Realtek to review the v2 of this patch
please, which still hasn't happened yet...
I inquired for the RTD1619 patch, and James replied that for its GICv3
they supposedly do _not_ have the optional GICH and GICV [1].
Thus I am waiting on their input for whether they have it on RTD1195.
The U-Boot that I have on this device does not boot the kernel in HYP
mode, so I cannot test KVM myself. Same issue on the Horseradish EVB.
On the Buffalo LinkStation LS520 I still don't have a serial console
(probably my bad soldering skills), but I doubt it's any different.
Regards,
Andreas
[1] https://patchwork.kernel.org/patch/11227113/
--
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)
