From: Haibo Chen <haibo.chen@xxxxxxx> Add fsl,strobe-dll-delay-target binding. Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx> --- Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index f707b8bee304..d50144f5f1d2 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -38,6 +38,11 @@ Optional properties: This property allows user to change the tuning step to more than one delay cells which is useful for some special boards or cards when the default tuning step can't find the proper delay window within limited tuning retries. +- fsl,strobe-dll-delay-target: Specify the strobe dll control slave delay target. + This delay target programming host controller loopback read clock, and this + property allows user to change the delay target for the strobe input read clock. + If not use this property, driver default set the delay target to value 7. + Only eMMC HS400 mode need to take care of this property. Examples: -- 2.17.1
