[PATCH v3 32/49] ath11k: add mac.h

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



(patches split for easier review, see the cover letter for more)

Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath11k/mac.h | 145 ++++++++++++++++++++++++++++++++++
 1 file changed, 145 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/mac.h b/drivers/net/wireless/ath/ath11k/mac.h
new file mode 100644
index 000000000000..f84af1fc4952
--- /dev/null
+++ b/drivers/net/wireless/ath/ath11k/mac.h
@@ -0,0 +1,145 @@
+/* SPDX-License-Identifier: BSD-3-Clause-Clear */
+/*
+ * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef ATH11K_MAC_H
+#define ATH11K_MAC_H
+
+#include <net/mac80211.h>
+#include <net/cfg80211.h>
+
+struct ath11k;
+struct ath11k_base;
+
+struct ath11k_generic_iter {
+	struct ath11k *ar;
+	int ret;
+};
+
+/* number of failed packets (20 packets with 16 sw reties each) */
+#define ATH11K_KICKOUT_THRESHOLD		(20 * 16)
+
+/* Use insanely high numbers to make sure that the firmware implementation
+ * won't start, we have the same functionality already in hostapd. Unit
+ * is seconds.
+ */
+#define ATH11K_KEEPALIVE_MIN_IDLE		3747
+#define ATH11K_KEEPALIVE_MAX_IDLE		3895
+#define ATH11K_KEEPALIVE_MAX_UNRESPONSIVE	3900
+
+#define WMI_HOST_RC_DS_FLAG			0x01
+#define WMI_HOST_RC_CW40_FLAG			0x02
+#define WMI_HOST_RC_SGI_FLAG			0x04
+#define WMI_HOST_RC_HT_FLAG			0x08
+#define WMI_HOST_RC_RTSCTS_FLAG			0x10
+#define WMI_HOST_RC_TX_STBC_FLAG		0x20
+#define WMI_HOST_RC_RX_STBC_FLAG		0xC0
+#define WMI_HOST_RC_RX_STBC_FLAG_S		6
+#define WMI_HOST_RC_WEP_TKIP_FLAG		0x100
+#define WMI_HOST_RC_TS_FLAG			0x200
+#define WMI_HOST_RC_UAPSD_FLAG			0x400
+
+#define WMI_HT_CAP_ENABLED			0x0001
+#define WMI_HT_CAP_HT20_SGI			0x0002
+#define WMI_HT_CAP_DYNAMIC_SMPS			0x0004
+#define WMI_HT_CAP_TX_STBC			0x0008
+#define WMI_HT_CAP_TX_STBC_MASK_SHIFT		3
+#define WMI_HT_CAP_RX_STBC			0x0030
+#define WMI_HT_CAP_RX_STBC_MASK_SHIFT		4
+#define WMI_HT_CAP_LDPC				0x0040
+#define WMI_HT_CAP_L_SIG_TXOP_PROT		0x0080
+#define WMI_HT_CAP_MPDU_DENSITY			0x0700
+#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT	8
+#define WMI_HT_CAP_HT40_SGI			0x0800
+#define WMI_HT_CAP_RX_LDPC			0x1000
+#define WMI_HT_CAP_TX_LDPC			0x2000
+#define WMI_HT_CAP_IBF_BFER			0x4000
+
+/* These macros should be used when we wish to advertise STBC support for
+ * only 1SS or 2SS or 3SS.
+ */
+#define WMI_HT_CAP_RX_STBC_1SS			0x0010
+#define WMI_HT_CAP_RX_STBC_2SS			0x0020
+#define WMI_HT_CAP_RX_STBC_3SS			0x0030
+
+#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED    | \
+				WMI_HT_CAP_HT20_SGI   | \
+				WMI_HT_CAP_HT40_SGI   | \
+				WMI_HT_CAP_TX_STBC    | \
+				WMI_HT_CAP_RX_STBC    | \
+				WMI_HT_CAP_LDPC)
+
+#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK		0x00000003
+#define WMI_VHT_CAP_RX_LDPC			0x00000010
+#define WMI_VHT_CAP_SGI_80MHZ			0x00000020
+#define WMI_VHT_CAP_SGI_160MHZ			0x00000040
+#define WMI_VHT_CAP_TX_STBC			0x00000080
+#define WMI_VHT_CAP_RX_STBC_MASK		0x00000300
+#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT		8
+#define WMI_VHT_CAP_SU_BFER			0x00000800
+#define WMI_VHT_CAP_SU_BFEE			0x00001000
+#define WMI_VHT_CAP_MAX_CS_ANT_MASK		0x0000E000
+#define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT	13
+#define WMI_VHT_CAP_MAX_SND_DIM_MASK		0x00070000
+#define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT	16
+#define WMI_VHT_CAP_MU_BFER			0x00080000
+#define WMI_VHT_CAP_MU_BFEE			0x00100000
+#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP		0x03800000
+#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIT	23
+#define WMI_VHT_CAP_RX_FIXED_ANT		0x10000000
+#define WMI_VHT_CAP_TX_FIXED_ANT		0x20000000
+
+#define WMI_VHT_CAP_MAX_MPDU_LEN_11454		0x00000002
+
+/* These macros should be used when we wish to advertise STBC support for
+ * only 1SS or 2SS or 3SS.
+ */
+#define WMI_VHT_CAP_RX_STBC_1SS			0x00000100
+#define WMI_VHT_CAP_RX_STBC_2SS			0x00000200
+#define WMI_VHT_CAP_RX_STBC_3SS			0x00000300
+
+#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \
+				 WMI_VHT_CAP_SGI_80MHZ      |       \
+				 WMI_VHT_CAP_TX_STBC        |       \
+				 WMI_VHT_CAP_RX_STBC_MASK   |       \
+				 WMI_VHT_CAP_RX_LDPC        |       \
+				 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   |  \
+				 WMI_VHT_CAP_RX_FIXED_ANT   |       \
+				 WMI_VHT_CAP_TX_FIXED_ANT)
+
+/* FIXME: should these be in ieee80211.h? */
+#define IEEE80211_VHT_MCS_SUPPORT_0_11_MASK	GENMASK(23, 16)
+#define IEEE80211_DISABLE_VHT_MCS_SUPPORT_0_11	BIT(24)
+
+#define WMI_MAX_SPATIAL_STREAM			3
+
+#define ATH11K_CHAN_WIDTH_NUM			8
+
+extern const struct htt_rx_ring_tlv_filter ath11k_mac_mon_status_filter_default;
+
+int ath11k_mac_create(struct ath11k_base *ab);
+void ath11k_mac_destroy(struct ath11k_base *ab);
+void ath11k_mac_unregister(struct ath11k_base *ab);
+int ath11k_mac_hw_ratecode_to_legacy_rate(u8 hw_rc, u8 preamble, u8 *rateidx,
+					  u16 *rate);
+u8 ath11k_mac_bitrate_to_idx(const struct ieee80211_supported_band *sband,
+			     u32 bitrate);
+u8 ath11k_mac_hw_rate_to_idx(const struct ieee80211_supported_band *sband,
+			     u8 hw_rate, bool cck);
+
+void __ath11k_mac_scan_finish(struct ath11k *ar);
+void ath11k_mac_scan_finish(struct ath11k *ar);
+
+struct ath11k_vif *ath11k_mac_get_arvif(struct ath11k *ar, u32 vdev_id);
+struct ath11k_vif *ath11k_mac_get_arvif_by_vdev_id(struct ath11k_base *ab,
+						   u32 vdev_id);
+struct ath11k *ath11k_mac_get_ar_by_vdev_id(struct ath11k_base *ab, u32 vdev_id);
+struct ath11k *ath11k_mac_get_ar_by_pdev_id(struct ath11k_base *ab, u32 pdev_id);
+struct ath11k *ath11k_mac_get_ar_vdev_stop_status(struct ath11k_base *ab,
+						  u32 vdev_id);
+
+void ath11k_mac_drain_tx(struct ath11k *ar);
+void ath11k_mac_peer_cleanup_all(struct ath11k *ar);
+int ath11k_mac_tx_mgmt_pending_free(int buf_id, void *skb, void *ctx);
+#endif




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux