The usb port represented by &usbhost1 uses an USB phy internal to the
SoC. We add the phy_type to the base dtsi so the board dts only have to
overwrite it if they use a different configuration. While at it we also
pin the usbhost port to host mode and limit the speed of the phy to
full-speed only, which it is only capable of.
Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
---
v1 -> v2: added the maximum speed limitation of the internal phy
arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts | 2 --
arch/arm/boot/dts/imx25-pdk.dts | 2 --
arch/arm/boot/dts/imx25.dtsi | 3 +++
3 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
index 0fde90df2b546..3f38c2e60a745 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -165,8 +165,6 @@
};
&usbhost1 {
- phy_type = "serial";
- dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index 05cccd12624cb..fb66884d8a2fa 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -304,8 +304,6 @@
};
&usbhost1 {
- phy_type = "serial";
- dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 9a097ef014af5..40b95a290bd6b 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -570,6 +570,9 @@
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
+ maximum-speed = "full-speed";
+ phy_type = "serial";
+ dr_mode = "host";
status = "disabled";
};
--
2.24.0
