Re: [PATCH v1 4/7] clk: qcom: Add graphics clock controller driver for SC7180

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Stephen,

Thanks for the review.

On 11/6/2019 6:00 AM, Stephen Boyd wrote:
Quoting Taniya Das (2019-10-31 05:21:10)
diff --git a/drivers/clk/qcom/gpucc-sc7180.c b/drivers/clk/qcom/gpucc-sc7180.c
new file mode 100644
index 0000000..0d893e6
--- /dev/null
+++ b/drivers/clk/qcom/gpucc-sc7180.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>

Are these of includes used?


yes, would clean up these headers.


+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "common.h"
+#include "gdsc.h"
+
+#define CX_GMU_CBCR_SLEEP_MASK         0xF
+#define CX_GMU_CBCR_SLEEP_SHIFT                4
+#define CX_GMU_CBCR_WAKE_MASK          0xF
+#define CX_GMU_CBCR_WAKE_SHIFT         8
+#define CLK_DIS_WAIT_SHIFT             12
+#define CLK_DIS_WAIT_MASK              (0xf << CLK_DIS_WAIT_SHIFT)
+
+enum {
+       P_BI_TCXO,
+       P_CORE_BI_PLL_TEST_SE,
+       P_GPLL0_OUT_MAIN,
+       P_GPLL0_OUT_MAIN_DIV,
+       P_GPU_CC_PLL1_OUT_EVEN,
+       P_GPU_CC_PLL1_OUT_MAIN,
+       P_GPU_CC_PLL1_OUT_ODD,
+};
+
+static struct pll_vco fabia_vco[] = {

const?


Will take care.

+       { 249600000, 2000000000, 0 },
+};
+
+static struct clk_alpha_pll gpu_cc_pll1 = {
+       .offset = 0x100,
+       .vco_table = fabia_vco,
+       .num_vco = ARRAY_SIZE(fabia_vco),
+       .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
+       .clkr = {
+               .hw.init = &(struct clk_init_data){
+                       .name = "gpu_cc_pll1",
+                       .parent_data =  &(const struct clk_parent_data){
+                               .fw_name = "bi_tcxo",
+                               .name = "bi_tcxo",

Do we need both? This is new so it should just work with .fw_name right?


yes, will clean this up.

+                       },
+                       .num_parents = 1,
+                       .ops = &clk_alpha_pll_fabia_ops,
+               },
+       },
+};
+
+static const struct parent_map gpu_cc_parent_map_0[] = {
+       { P_BI_TCXO, 0 },
+       { P_GPU_CC_PLL1_OUT_MAIN, 3 },
+       { P_GPLL0_OUT_MAIN, 5 },
+       { P_GPLL0_OUT_MAIN_DIV, 6 },
+       { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data gpu_cc_parent_data_0[] = {
+       { .fw_name = "bi_tcxo", .name = "bi_tcxo" },
+       { .hw = &gpu_cc_pll1.clkr.hw },
+       { .fw_name = "gcc_gpu_gpll0_clk_src", .name = "gcc_gpu_gpll0_clk_src" },
+       { .fw_name = "gcc_gpu_gpll0_div_clk_src",
+                                       .name = "gcc_gpu_gpll0_div_clk_src" },
+       { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+};

Same for these.

+
+static const struct freq_tbl ftbl_gpu_cc_gmu_clk_src[] = {
+       F(19200000, P_BI_TCXO, 1, 0, 0),
+       F(200000000, P_GPLL0_OUT_MAIN_DIV, 1.5, 0, 0),
+       { }
+};
[..]
+
+
+static int gpu_cc_sc7180_probe(struct platform_device *pdev)
+{
+       struct regmap *regmap;
+       struct alpha_pll_config gpu_cc_pll_config = {};
+       unsigned int value, mask;
+
+       regmap = qcom_cc_map(pdev, &gpu_cc_sc7180_desc);
+       if (IS_ERR(regmap))
+               return PTR_ERR(regmap);
+
+       /* 360MHz Configuration */
+       gpu_cc_pll_config.l = 0x12;
+       gpu_cc_pll_config.alpha = 0xC000;
+       gpu_cc_pll_config.config_ctl_val = 0x20485699;
+       gpu_cc_pll_config.config_ctl_hi_val = 0x00002067;
+       gpu_cc_pll_config.user_ctl_val = 0x00000001;
+       gpu_cc_pll_config.user_ctl_hi_val = 0x00004805;
+       gpu_cc_pll_config.test_ctl_hi_val = 0x40000000;

Is there a reason this is built on the stack? Save space or something?


I have done as we had discussed during the dispcc review for SDM845
https://patchwork.kernel.org/patch/10446073/
>>>
>> +static const struct alpha_pll_config disp_cc_pll0_config = {
>> +       .l = 0x2c,
>> +       .alpha = 0xcaaa,
>> +};
>
> Any reason this can't be put on the stack in the probe function?
>
I would move it.
>>>

In case you think I should move it outside I can do that too.

+
+       clk_fabia_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll_config);
+
+       /* Recommended WAKEUP/SLEEP settings for the gpu_cc_cx_gmu_clk */
+       mask = CX_GMU_CBCR_WAKE_MASK << CX_GMU_CBCR_WAKE_SHIFT;
+       mask |= CX_GMU_CBCR_SLEEP_MASK << CX_GMU_CBCR_SLEEP_SHIFT;
+       value = 0xF << CX_GMU_CBCR_WAKE_SHIFT | 0xF << CX_GMU_CBCR_SLEEP_SHIFT;

mask and value can just be big constants? I'm not sure anyone cares to
tweak this later, but I guess it's fine this way too.

+       regmap_update_bits(regmap, 0x1098, mask, value);
+
+       /* gpu_cc_ahb_clk */

What are we doing to gpu_cc_ahb_clk??


I was marking this CRITICAL clock, but I checked the HW specs and it is always left ON from HW, so will remove it.

+       regmap_update_bits(regmap, 0x1078, 0x1, 0x1);
+
+       /* Configure clk_dis_wait for gpu_cx_gdsc */
+       regmap_update_bits(regmap, 0x106c, CLK_DIS_WAIT_MASK,
+                                               8 << CLK_DIS_WAIT_SHIFT);
+
+       return qcom_cc_really_probe(pdev, &gpu_cc_sc7180_desc, regmap);
+}
+
+static struct platform_driver gpu_cc_sc7180_driver = {
+       .probe = gpu_cc_sc7180_probe,
+       .driver = {
+               .name = "sc7180-gpucc",
+               .of_match_table = gpu_cc_sc7180_match_table,
+       },
+};
+
+static int __init gpu_cc_sc7180_init(void)
+{
+       return platform_driver_register(&gpu_cc_sc7180_driver);
+}
+core_initcall(gpu_cc_sc7180_init);

Does it need to be core initcal? Maybe module_platform_driver() works
just as well?


I will leave it to subsys_initcall.

+
+static void __exit gpu_cc_sc7180_exit(void)
+{
+       platform_driver_unregister(&gpu_cc_sc7180_driver);
+}
+module_exit(gpu_cc_sc7180_exit);
+
+MODULE_DESCRIPTION("QTI GPU_CC SC7180 Driver");
+MODULE_LICENSE("GPL v2");

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux